• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• v.61 no.11
• /
• pp.573-579
• /
• 2018

Background and Objectives Cochlear dead region (CDR) is a region in the cochlear where hearing loss has occurred due to damage to the inner hair cells and/or neurons. Recently, a subjective test involving a pure-tone test in the presence of threshold-equalizing noise (TEN) was introduced to identify CDR. However, for uncooperative patients, such a subjective method would be unsuitable and objective methods would be needed instead to detect CDR. The acoustic change complex (ACC) is an evoked potential elicited by changes in the ongoing sound. In this study, we developed an objective method of identifying CDR by combining ACC response with a TEN test, namely the TEN-ACC test, and investigated its feasibility in normal-hearing listeners. Subjects and Method Ten normal-hearing subjects participated in this study. All subjects underwent both behavioral TEN test and electrophysiological TEN-ACC test. The stimuli for the TEN-ACC test consisted of TEN and embedded pure tones with different frequencies/signals to noise ratios (SNRs). To identify the thresholds, the range SNR of stimulation was varied from 0 to 20 dB, in stages of 4 dB. Results The ACC responses of all subjects who participated in this study were well elicited by stimuli developed for the TEN-ACC test. We confirm that the pure-tones embedded in TEN elicited the objective ACC response. Conclusion The results of this study suggest that the novel TEN-ACC test can be applied to evoke ACC in normal-hearing listeners. Future research should incorporate hearing-impaired listeners to determine the feasibility of the TEN-ACC test as an objective method to identify CDR.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.597-603
• /
• 1999

Even though the development of livestock industry in Asia and Australasia has brought the economic growth and thus elevated the living standard in these areas, it has also brought the pollution caused by the increasing amount of animal wastes. Among them, Japan probably is the first country that suffered from the animal waste pollution as early as in 1970s. Nowadays, the animal waste pollution has been a common problem for almost every countries in this region. To solve it, different measures and regulations have been implemented in many countries. In this paper, different methods for animal waste disposal are discussed, including: manure-bed animal housing, composting, anaerobic treatment, odor control, utilization of biogas, aerobic treatment, three-step process, N and P removal, land application, cultivation of algae, anaerobic treatment of dead animals. It is hoped that an animal industry without pollution can be achieved in the future.

• Water for future
• /
• v.12 no.1
• /
• pp.56-59
• /
• 1979

A prompt subsurface runoff producing mechanism whih creaters a depletion curve of direct runoff hydrograph is simulated by a dead zone dispersion model technique. Runoff processes are carried out by routing of the outflow resulted from previous linear channel and effective rainfall from its corresponding subwatershed through a series of conceptual linear channels representing subwatersheds of a catchment. Working rules are explained for evaluation the model parameters such as translatory velocity, diffusive factor, and parameters concerning the infiltration and relative magnitude of the prompt subsurface flow region.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2004

In the present study, the gas injection system based on air-water model was designed to investigate the flow characteristics of liquid phase. A PIV system was applied to analyze the flow pattern in a ladle which gas stated to rise upward from the bottom. Gas flow is one of most important factors which could feature a flow pattern in a gas injection system. As the gas injected into the liquid, the kinetic energy of bubble transfer to liquid phase and a strong circulation flow develops in the liquid phase. Such a flow in the liquid develops vortex and improve the mixing process. Due to the centrifugal force, circulation flow was well developed near both wall sides and upper region respectively. Increasing gas flow was helpful to remove dead zone but, weak flow zone still exists in spite of the increasement of gas flow rate.

• Korean Journal of Chemical Engineering
• /
• v.36 no.3
• /
• pp.356-367
• /
• 2019

This work presents an advanced and systematic approach to analytically design the optimal parameters of a two parameter second-order internal model control (IMC) filter that satisfies operational constraints on the output process, the manipulated variable as well as rate of change of the manipulated variable, for a first-order plus dead time (FOPDT) process. The IMC parameters are designed to minimize a control objective function composed of the weighted sum of the error between the process variable and the set point, and the rate of change of the manipulated variable, and to satisfy the desired constraints. The feasible region of the constrained IMC control parameters was graphically analyzed, as the process parameters and the constraints varied. The resulting constrained IMC control parameters were also used to find the corresponding industrial proportional-integral controller parameters of a Smith predictor structure.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.26-30
• /
• 1999

The constraint condition is the stator voltage and the stator current to operate the motor in the flux weakening region. The maximum current is limited by the inverter current rating and the machine thermal rating. Given DC link voltage to control the motor in the flux weakening the maximum voltage is determined by considering PWM strategy, dead time, voltage drop of the inverter switching device, and the margin of the voltage for current forcing. In this paper, the new method to determine the available maximum voltage is derived by the analythic method and by considering the factors of the voltage drop. So Determining the maximum voltage is very useful to enlarge the speed operation region in the flux weakening operation, the utility of the maximum voltage is increased.

• Journal of Veterinary Clinics
• /
• v.21 no.1
• /
• pp.58-61
• /
• 2004

A 5-year old female shih-tzu referred to the veterinary Teaching Hospital, College of Veterinary Medicine, Konkuk University. The patient was presented with a mass of ventral to pubic region and intraperineal region. CBC, chemistry, x-ray, fine needle aspiration, biopsy and MRI was performed. The dog was definitively diagnosed as lipoma based on cytologic and histopathologic examination. In order to remove the mass, an approach with two direction was made. First, intraperineal region was removed about 40%, and then ventral to pubic was removed the remainder. And inserted penrose drain for obliterate dead space to prevent the accumulation of serous discharge. The dog is clinically normal and being monitored for development of any abnormal signs for the time being. In this case, diagnostic MRI was very useful procedure. it revealed accurate location of a lipoma and useful manner for decision of surgical approach to remove.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.640-646
• /
• 2011

The current study presents the design and performance of a novel 4/2 switched reluctance motor (SRM) for a high-speed air blower. With a comparative study of some rotor structures for a high-speed drive, a stepper-type rotor is optimized to produce a continuous torque and a low torque ripple. Rotor pole arc is modified to have a wide continuous output torque region, and air gap is determined to develop less torque ripple. The rotor radius is determined to reduce torque ripple with a reiterative FEM analysis. The designed rotor has three regions: short uniform, long uniform, and nonuniform air-gap region. The positive torque region is wider than a conventional 4/2 SRM without any torque dead zone. A prototype is tested and the efficiency is up to 72[%] at 30,000[rpm], 600[w] output.

• Korean Journal of Microbiology
• /
• v.47 no.4
• /
• pp.289-294
• /
• 2011

We investigated the cold shock sensitivity of DEAD-box RNA helicase gene deleted strains of in Bacillus subtilis CU1065. To understand cold shock effects, cells were cultivated at $37^{\circ}C$ to log phase ($O.D_{600}$=0.5-0.6) and then temperature was shifted to $15^{\circ}C$. Cold shock slow down the growth rate of wild type and deleted strains of DEAD-box RNA helicase gene (ydbR, yfmL, yqfR, deaD). The growth rate of ydbR deleted strain is 5 times severely reduced compared to that of wild type strain (CU1065). But the growth rate of other three (yfmL, yqfR, deaD) deleted strains is nearly equal to the growth rate of wild type. Compared to $37^{\circ}C$, the amount of ydbR and yqfR mRNA transcripts are increased at the growth temperature of $15^{\circ}C$. On the other hands the mRNA transcripts of yfmL and deaD are not changed at both conditions of $37^{\circ}C$ and $15^{\circ}C$. Upon cold shock treatment ydbR mRNA transcript is clearly increased. After treatment of rifampicin (bacteria transcription inhibitor) the amount of ydbR mRNA was measured. Temperature shift from $37^{\circ}C$ to $15^{\circ}C$ and rifampicin treatment showed slowly decay of ydbR mRNA. But at $37^{\circ}C$ and rifampicin treatment ydbR mRNA is rapidly reduced. These results showed that cold shock induction of ydbR mRNA resulted from the stability of ydbR mRNA and not from the transcription induction of ydbR. In relation to these results, we found the cold box element of csp (cold shock protein gene) in 5' untranslated region of ydbR gene. Cold shock induction of ydbR is caused by the stability of ydbR mRNA like the stability of csp mRNA.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.260-270
• /
• 1996

Structure and dynamics of Pinus densiflora community in Mt. Kaya were studied to provide the information needed for management of Pinus densiflora forest in the southern inland of Korea. Stratification structure of Pinus densiflora community in the lower and middle slope consisted of tree layer(10~15m), subtree layer(4~10m), shrub layer(1~4m), and herb layer(below 1m), while in the rock zone of ridge and top area consisted of tree layer(7~10m), subtree layer(2~7m), shrub layer(1~2m), and herb layer(below 1m). According to the diameter distribution of tree species in Pinus densiflora community, secondary Pinus densiflora forest will gradually decline. Its forest may be replaced by Quercus mongolica, Quercus serrata, Carpinus laxiflora, C. cordata, and Fraxinus rhychophylla in the lower slope, and by Quercus mongolica in the middle slope. Pinus densiflora forest has its seedlings and saplings in ridge and top area, so it may be sustained. By taking cores from Pinus densiflora trees in research area, it could be obtained that in the lower and middle slope, age of Pinus densiflora forest was about 80~90 years old. When the age of its trees was about 72~80 years old, withering trees of standing dead occurred. Disturbance regime of Pinus densiflora community in Mt. Kaya consisted of standing dead, uprooting and limbfall, these were 70.6%, 17.6% and 11.8% respectively. It takes about 100~110 years for advance growth of Pinus densiflora in ridge and top area to reach tree layer. During the period, it has twice chances of disturbance in standing dead. Annual diameter growth of Pinus densiflora was 2.45~2.9mm in the lower and middle slope, while it was 1.75mm in ridge and top region, by measuring cores.