• Bulletin of the Society of Naval Architects of Korea
• /
• v.2 no.1
• /
• pp.9-14
• /
• 1965

Ship designers make every efforts to get faster ships in accordance with the development of the Naval Architecture. But for the speed lying over factor length ratio 2.5-3.0, we could put a powerful engine into the conventional round bottom displacement type vessels, but it is very difficult in view point of economy, weight and volume. The principal cause of these speed obstacles is the wave making resistance and researchers are trying to decrease this resistance. One of the resolving ways, planing hulls were applied to small high boats. Planing hull's advantage is not restricted to speed, but the workmanship of the planing hull is easier than those of displacement type vessels of round bottom. Planing hull, therefore, are widely applicable to the intermediate speed boats, which don't have enough high speed to take planing advantage, as well as high speed boats. We will discuss related phenomena of the planing hull in details and this paper we particularly interested in the interjection point(speed length ratio 3.0-3.5 by Mr. D. De Groots) between semi-planing and full planing hulls on the resistance characteristic curve. The paper by Prof. Keuck Chun Kim, "Some Characteristics of Straight Framed V-bottom Hull Forms", Journal of the society of Naval Architects of Korea, Vol.1, No.1, Dec.5, 1964, is referred to the V-bottom hull forms belonging to low speed region and determines practical applicable limit of the speed length ratio combined with construction costs, under which are still used by large commercial vessels. This is the interesting contrast between his and authors. We will further discuss the speed length ratio which is considered as a beginning point to planing effect. For this analysis, we choose 3 model ships: Model (1) and (2) have the same principal dimensions, model 3 varied dimension. Model (1) is full-planing hull, (2) is semi-planing hull and (3) is complete planing hull. They are aimed to collect proper design data for purposed ships.

• Smart Structures and Systems
• /
• v.21 no.3
• /
• pp.305-320
• /
• 2018

The second half of the 20th century was marked with a significant raise in amount of railway bridges in Austria made of reinforced concrete. Today, many of these bridges are slowly approaching the end of their envisaged service life. Current methodology of assessment and evaluation of structural condition is based on visual inspections, which, due to its subjectivity, can lead to delayed interventions, irreparable damages and additional costs. Thus, to support engineers in the process of structural evaluation and prediction of the remaining service life, the Austrian Federal Railways (${\ddot{O}}$ BB) commissioned the formation of a concept for an anticipatory life cycle management of engineering structures. The part concerning concrete bridges consisted of forming a bridge management system (BMS) in a form of a web-based analysis tool, known as the LeCIE_tool. Contrary to most BMSs, where prediction of a condition is based on Markovian models, in the LeCIE_tool, the time-dependent deterioration mechanisms of chloride- and carbonation-induced corrosion are used as the most common deterioration processes in transportation infrastructure. Hence, the main aim of this article is to describe the background of the introduced tool, with a discussion on exposure classes and crucial parameters of chloride ingress and carbonation models. Moreover, the article presents a verification of the generated analysis tool through service life prediction on a dozen of bridges of the Austrian railway network, as well as a case study with a more detailed description and implementation of the concept applied.

• Journal of the Korean association of regional geographers
• /
• v.14 no.5
• /
• pp.480-491
• /
• 2008

Recent globalization and de-industrialization have caused intensive competition among places; hence, cities worldwide are pursuing regeneration and enhanced competitiveness through cultural strategies. Focusing on the cultural strategies of local cities in Japan, this paper reveals that the concept of "being-a-region" is key to cultural strategies, and explores what logic is inherent in such regional developments. Since the period of rapid economic growth, Japanese local cities have played the role of "Furusato(home) for Japanese." With the recent decentralization, "being-a-region" is now emerging as a powerful discourse for the cultural strategies of local cities. This idea of "being-a-region" can be largely defined as a region's special character or even an existential sense of place, but in fact it is political relationships among agencies that define the region. "Being a region" in Japan appears to extend to "being a nation." Thus, it would be necessary to focus on the power relationships that surround the concept of "being a region" when we deal with the meaning of region in relationships to cultural strategies of local cities.

• Cross-Cultural Studies
• /
• v.33
• /
• pp.193-239
• /
• 2013

A photograph, which was applied to contemporary art, plays a very important role in the whole of the multiplied and diversified contemporary arts today. The application of photos, which were shown in contemporary art following the 1950s, can be classified into five types according to role and function of a photo in the process of developing a work. However, this classification is shown a little ambiguously. That is because photos of being utilized by artists are indicated very diversely depending on their artistic strategy and situation. As the first type, a few painters utilize a photo as mirror of reality in order to materialize a challenging and revolutionary idea with going against traditional picture in their pictorial practice. As the second classification, especially American painters utilize a photo as material component of forming their picture like photo-montage or collage. The combined application of this medium is first doing genre de-construction and hybridization of post-modernism in the 1980s while ultimately aiming at social criticism or political satire. The third type implies particularly a case that avant-garde artists utilize a photo as evidence of a work. In this case, a photo is employed as evidence of a work, which disappears in the temporal space essentially like body art, land art, and performance. Also, as the fourth type is a case of utilizing a photo for artistic concept of a work, not pictorial practice of picture, it is utilized often as important artistic strategy of conceptual artists. The final type of utilizing photo is a case of applying photo as formative tool on behalf of dye-stuffs or crayon in order to record a section of reality, which always continues regardless of event or meaning any more, in the traditional picture. In this case, a work is indicated as a photo of having a form of picture, namely, as Forme-tableau. The main subject is indicated there as a daily case of being repeated always the extremely common and revived theme.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.32-44
• /
• 2019

Based on the characteristics of cultural expressions, this paper compares and analyzes the cases of representative commercial architectural spaces of six largest cities in China.In order to promoting the sustainable development of the indoor space culture of modern commercial buildings in China.Six cases were analyzed from the viewpoints of cultural tradition, locality, popularity, technology, and ecology. The results are as follows. First, the tradition of culture requires the emphasis on the traditional elements of specific areas in the interior space of commercial architecture.Second, the regional character of culture is closely related to the social and natural environment factors such as the economic development of the interior space of commercial architecture, historical intrinsic space, geographical environmental conditions, and climate.Fourth, the technicality of culture is to integrate construction method, structure form, and material with local culture into commercial architecture interior space.Fifth, cultural ecology places attention to placing plants in the interior space of commercial architecture and creating a healthy, pleasant and safe environment.

• Geomechanics and Engineering
• /
• v.18 no.5
• /
• pp.535-543
• /
• 2019

Building on/with expansive soils with no treatment brings complications. Compacted expansive soils specifically fall short in satisfying the minimum requirements for transport embankment infrastructures, requiring the adoption of hauled virgin mineral aggregates or a sustainable alternative. Use of hauled aggregates comes at a high carbon and economical cost. On average, every 9m high embankment built with quarried/hauled soils cost $12600MJ.m^{-2}$ Embodied Energy (EE). A prospect of using mixed cutting-arising expansive soils with industrial/domestic wastes can reduce the carbon cost and ease the pressure on landfills. The widespread use of recycled materials has been extensively limited due to concerns over their long-term performance, generally low shear strength and stiffness. In this contribution, hydromechanical properties of a waste tyre sand-sized rubber (a mixture of polybutadiene, polyisoprene, elastomers, and styrene-butadiene) and expansive silt is studied, allowing the short- and long-term behaviour of optimum compacted composites to be better established. The inclusion of tyre shred substantially decreased the swelling potential/pressure and modestly lowered the compression index. Silt-Tyre powder replacement lowered the bulk density, allowing construction of lighter reinforced earth structures. The shear strength and stiffness decreased on addition of tyre powder, yet the contribution of matric suction to the shear strength remained constant for tyre shred contents up to 20%. Reinforced soils adopted a ductile post-peak plastic behaviour with enhanced failure strain, offering the opportunity to build more flexible subgrades as recommended for expansive soils. Residual water content and tyre shred content are directly correlated; tyre-reinforced silt showed a greater capacity of water storage (than natural silts) and hence a sustainable solution to waterlogging and surficial flooding particularly in urban settings. Crushed fine tyre shred mixed with expansive silts/sands at 15 to 20 wt% appear to offer the maximum reduction in swelling-shrinking properties at minimum cracking, strength loss and enhanced compressibility expenses.

• Computers and Concrete
• /
• v.23 no.1
• /
• pp.61-68
• /
• 2019

This paper presents a computational rational model to predict the ultimate and optimized load capacity of reinforced concrete (RC) beams strengthened by a combination of longitudinal and transverse fiber reinforced polymer (FRP) composite plates/sheets (flexure and shear strengthening system). Several experimental and analytical studies on the confinement effect and failure mechanisms of fiber reinforced polymer (FRP) wrapped columns have been conducted over recent years. Although typical axial members are large-scale square/rectangular reinforced concrete (RC) columns in practice, the majority of such studies have concentrated on the behavior of small-scale circular concrete specimens. A high performance concrete, known as polymer concrete, made up of natural aggregates and an orthophthalic polyester binder, reinforced with non-metallic bars (glass reinforced polymer) has been studied. The material is described at micro and macro level, presenting the key physical and mechanical properties using different experimental techniques. Furthermore, a full description of non-metallic bars is presented to evaluate its structural expectancies, embedded in the polymer concrete matrix. In this paper, the mechanism of mechanical interaction of smooth and lugged FRP rods with concrete is presented. A general modeling and application of various elements are demonstrated. The contact parameters are defined and the procedures of calculation and evaluation of contact parameters are introduced. The method of calibration of the calculated parameters is presented. Finally, the numerical results are obtained for different bond parameters which show a good agreement with experimental results reported in literature.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.7
• /
• pp.89-99
• /
• 2019

The purpose of this study is to reveal the meaning of Le Corbusier's works focused on Maison Guiette. This House was completed in 1926, 4 year later than the work of the Citrohan and also, this house is the only remaining mixed use Dwelling in Belgium. It offers a fine example of the early architectural concepts of Le Corbusier's. Despite these important facts, the meanings of the ideas of this house have not been paid attention as much as other houses constructed at the same period, such as Maison La Roche, Maison Stein de Monzie, Villa Savoye, etc. In his book, 'Oeuvre Complete 1910-1929', Le Corbusier mentioned as follows: "A special solution imposed by Belgian housing developments characterized by a dimension of 6 meters of frontage and a very great depth. The staircase serving the various floors is like the ladder of Jacob climbs Charlie Chaplin in the "Kid" and This house is an architectural experiments of his ideas. And this study aims at analysing the relationship between Maison Guiette and spaces on the basic of Le Corbusier's 'Five Points of a New Architecture' which had a great effects on architectural history and became a fundamental elements for the change into the Modern housing. By analysing the points in regard with the Features of Architectural Concept Applied in Maison Guiette, The Five Points are the background of the interpenetration of the interior and the exterior. To attain this, this research appraises each points in detail in regards with Maison Guiette. The study of Maison Guiette will be an important architectural subject to clarify the meaning of his later works and ideas.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.9
• /
• pp.131-142
• /
• 2019

The purpose of this study was to find out the characteristics of housing policies and apartment designs by comparison of supplying and remodeling apartments between France and Korea. The literature review was used in Korea cases and the literature review, site investigation, and expert interviews were used in France cases. At first, by reviewing the related literatures about the apartment developments and regenerations in France and Korea, twelve remodeling cases were represented respectively in Ile de France and Seoul. As a result, in housing policy, the Korean housing market had a shortage of low-priced houses related to biased apartment developments by private sector dependence. Consequently, the living in Korea generally required the high price in low quality houses. But in France, the housing policies were very successful in housing quantity, quality, and expense. It is involved in balances between the public housing supply and the activation of a private housing market based on the government support policy. Nevertheless, in the success of the apartment as a house type, apartments in France means the social elimination because of the supply method problems and the management failures of HLM institutions. However, in Korea, the apartment implies the successful life of the middle class population because of the competitive evolutions during 40 years as a market housing. Secondly, In the characteristics of remodeling, the remodeling in Korea was for property value improvements. It mainly executed to expand the size of a house by expansion of living space. However the remodeling in France was for social mixes and connections with the surrounding area. It mostly performed by various design methods such as vertical merging houses, partial removal, reconstruction, and construction of a local community centers and mixed-use residential buildings. This study shows the simultaneously remodeling features of those two countries. These findings can be used in developing effective strategies for the public housing regenerations in Korea and other countries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1565-1570
• /
• 2019

Many possibilities of Big Data has been discussed widely for several years. And the importance of protecting personal information has been emphasized more strongly. During the process of integrating several personal information for the improvement of usability of Big Data, there are many problems occured like the likelihood of the identification of one person, the level of personal infomation used to create personalized services in the companies making and using Big Data. In this study, I summarize GDPR(General Data Protection Regulation) of EU, CCPA(California Consumer Privacy Act) of USA and domestic Big Data 3 Acts Amendment proposals. Also I discuss re-identifcation of de-identificated information, social costs of the usage agreement of personal information, possible problems in construction and combination of private and public big data, political suggestions about settlement of regulatory environment.