• 공업화학
• /
• 제10권2호
• /
• pp.263-267
• /
• 1999

사용이 끝난 폐촉매의 NO 제거 활성은 새 촉매의 약 27%로 크게 저하되어 있었다. 폐촉매의 비표면적은 새로운 촉매의 약 63%로서 활성소실의 주 원인은 소결에 의한 표면적 감소, 촉매표면의 활성물질의 농도저하, 중금속에 의한 활성점의 피독 등으로 판단된다. 폐촉매의 재생은 주로 피독 물질의 제거에 중점을 두었는데, $80^{\circ}C$ 물을 이용하여 30분에서 2시간 처리하여 재생한 촉매가 가장 좋은 효과를 보였으며 이는 중금속 K와 Na가 제거된 때문으로 판단된다. 새로운 촉매를 기준으로 하였을 때 폐촉매의 표면적당 재생된 활성은 약 79%이었으나 질량당 재생된 활성은 약 49%이었다.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.60.1-60.8
• /
• 2021

Objectives: The aim of this study was to verify the match between 5 shades of composites from different manufacturers with a shade guide and among the systems using a portable spectrophotometer. Materials and Methods: Shade measurements were performed on specimens of Z350 XT (3M ESPE), Charisma Diamond (Heraeus Kulzer GmbH), Esthet X-HD (Dentsply Caulk), and Empress Direct (Ivoclar-Vivadent) for shades A1, A2, A3, B1, and C3 using a Vita Easyshade spectrophotometer (Vita Zahnfabrik) against a white background. Corresponding shades of Vitapan Classical (Vita Zahnfabrik) guide were measured likewise and shade variation (ΔE) was calculated based on International Commission on Illumination L^*a^*b^* parameters. The ΔE of the composites in each shade was compared by one-way analysis of variance and Tukey's post hoc test (α = 0.05). Results: All composites presented ΔE > 3.7 compared with the shade guide. Variation in shades A3, B1, and C3 was significantly different for all composites. ΔE of Z350 XT was significantly lower for A1 than for the other shades, whereas ΔE of Z350 XT and Charisma Diamond were significantly lower for A2 than for the other shades. Conclusions: No composite shade matched with the shade guide. Equivalent shades of the restorative composite from different manufacturers may show clinically noticeable ΔE.

• Animal Bioscience
• /
• 제36권7호
• /
• pp.1044-1058
• /
• 2023

Objective: The objective of this study was to characterize physiochemical and nutrient profiles of feedstock and co-products from canola bio-oil processing that were impacted by source origin. The feedstocks and co-products (mash, pellet) were randomly collected from five different bio-oil processing plants with five different batches of samples in each bio-processing plant in Canada (CA) and China (CH). Methods: The detailed chemical composition, energy profile, total digestible nutrient (TDN), protein and carbohydrate subfractions, and their degradation and digestion (CNCPS6.5) were determined. Results: The results showed that TDN_1x was similar in meals between CA and CH. CH meals and feedstock had higher, truly digestible crude protein (tdCP) and neutral detergent fiber (tdNDF) than CA while CA had higher truly digestible non-fiber carbohydrate (tdNFC). The metabolizable energy (ME_3x), net energy (NE_Lp3x, NE_m3x, and NE_g3x) were similar in meals between CA and CH. No differences were observed in energy profile of seeds between CA and CH. The protein and carbohydrate subfractions of seeds within CH were similar. The results also showed that pelleting of meals affected protein sub-fractionation of CA meals, except rapidly degradable fractions (PB1), rumen degradable (RDPB1) and undegrdable PB1 (RUPB1), and intestinal digestible PB1 (DIGPB1). Canola meals were different in the soluble (PA2) and slowly degradable fractions (PB2) between CA and CH. The carbohydrate fractions of intermediately degradable fraction (CB2), slowly degradable fraction (CB3), and undegradable fraction (CC) were different among CH meals. CH presented higher soluble carbohydrate (CA4) and lower CB2, and CC than CA meals. Conclusion: The results indicated that although the seeds were similar within and between CA and CH, either oil-extraction process or meal pelleting seemed to have generated significantly different aspects in physiochemical and nutrient profiles in the meals. Nutritionists and producers need to regularly check nutritional value of meal mash and pellets for precision feeding.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권8호
• /
• pp.1180-1185
• /
• 2009

Two experiments were carried out to study the effects of dietary energy level on nutrient digestion, nitrogen (N) utilization, growth performance, insulin-like growth factor-I (IGF-I), and insulin-like growth factor binding protein-3 (IGFBP-3) in plasma, liver and longissimus dorsi muscle in growing-finishing pigs. In experiment 1 (Exp 1), 15 castrated male pigs (Duroc${\times}$Landrace${\times}$Large White) (Body weight, BW, 55.6${\pm}$1.8 kg) were divided into three groups and fed rations containing 13.33, 14.87 and 17.35 MJ digestible energy (DE)/kg as treatments I, II and III, respectively, using soybean oil as an energy source. The experiment lasted 8 days and faecal and urinary samples were collected during the last 3 days. The results showed that the digestibility of dry matter (DM), energy and N was increased from treatments I to III (p<0.01). N-retention and N-retention rate were not influenced by dietary DE level (p>0.05). In experiment 2 (Exp 2), 36 female pigs (Duroc${\times}$Landrace${\times}$Large White) (BW 41.5${\pm}$3.8 kg) were divided into three groups. The pigs were fed with the same three rations used in Exp 1 for 60 days. At the end of Exp 2, eight pigs were selected from each group for blood sampling and 4 pigs for slaughter trial. The results indicated that average daily feed intake (ADFI) and N-intake were significantly decreased (p<0.01), and DE intake (p<0.01) and average daily gain (ADG) (p<0.05) were increased. IGF-I and IGFBP-3 in plasma were increased (p<0.05). No significant differences in IGF-I and IGFBP-3 in liver and longissimus dorsi muscle were found between different treatments. It was concluded that higher dietary DE level improved nutrient digestibility, ADG and feed/gain ratio when soybean oil was used as an energy source in the ration of growing-finishing pigs. No significant differences were found in Nretention and IGF-I and IGFBP-3 in liver and longissimus dorsi muscle between different treatments.

• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.1-8
• /
• 2012

The development of martensitic grades which can be processed in continuous galvanizing lines requires the reduction of the oxides formed on the steel during the hot dip process. This reduction mechanism was investigated in detail by means of High Resolution Transmission Electron Microscopy (HR-TEM) of cross-sectional samples. Annealing of a martensitic steel in a 10% $H_2+N_2$ atmosphere with the dew point of $-35^{\circ}C$ resulted in the formation of a thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film and amorphous $_{a-X}MnO.SiO_{2}$ oxide particles on the surface. During the hot dip galvanizing in Zn-0.13%Al, the thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was reduced by the Al. The $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides however remained embedded in the Zn coating close to the steel/coating interface. No $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formation was observed. During hot dip galvanizing in Zn-0.20%Al, the $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was also reduced and the amorphous $_{a-X}MnO.SiO_{2}$ and $a-SiO_{2}$ particles were embedded in the $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formed at the steel/coating interface during hot dipping. The results clearly show that Al in the liquid Zn bath can reduce the crystalline $_{C-X}MnO.SiO_{2}$ (x>1) oxides but not the amorphous $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides. These oxides remain embedded in the Zn layer or in the inhibition layer, making it possible to apply a Zn or Zn-alloy coating on martensitic steel by hot dipping. The hot dipping process was also found to deteriorate the mechanical properties, independently of the Zn bath composition.

• 청정기술
• /
• 제25권4호
• /
• pp.324-330
• /
• 2019

선택적 촉매환원법은 산업 설비에서 분사되는 배기가스의 탈질 과정에 유용한 방법이다. 촉매 층 입구에서의 암모니아-질소산화물의 혼합비 분포는 탈질 과정에서 중요하다. 본 연구에서는 전산해석 기법을 이용하여 탈질설비의 입구 배기가스 내 질소산화물의 유동 분포에 따른 암모니아 분사 노즐의 유량을 조절하여 NH₃/NO 몰 비의 균일도를 개선하였다. 출구 X/H = 3 지점에서의 몰 비에 의한 평균제곱근오차 값을 최적화 변수로 선정하였고 실험계획법을 기반 한 최적화 알고리즘을 도입하였다. 균일, 포물선, 상향 솔림, 임의 등 4가지 입구 유동 형태에 대해 8개의 분사 노즐의 암모니아 분사 유량을 도출하였다. 정상상태의 비압축성 점성 이차원 유동장 해석을 위해 상용 소프트웨어인 ANSYS-FLUENT에 k-𝜖 난류모델을 적용하였다. 본 해석의 결과, 입구 배기가스의 유동 형태 별로 9.58%에서 80.0% 의 몰 비 개선 효과를 나타내었다.

• 복식
• /
• 제30권
• /
• pp.19-40
• /
• 1996

The purpose of this study is to make and analyse established studies of clothing pay-chology and marketing, showing the disciplin-ary trends problems and the outlook of social psychological Aspects of clothing. To achieve the purpose 621 articles have been used. -519 for master's and doctor's de-gree and 102 reported in journals -no social psychological Aspects of clothing for the past two decades(1974-1994) in Korea. All of these annual data were classified into making five years a unit. In the statistical analy-sis 'frequency' and 'percentage' were applied. To verify the degree of significance x2-test were used. 1. The trend of the study on the fields of clothing psychology consumer behavior and marketing over the period between 1974 and 1994 showed the continual trend of increase since the 1974 that the article on the field of clothing the continual trend of increase since the 1974 that the article on the field of cloth-ing psychology was first reported. 2. The domain that has the greatest pro-portion in the field of clothing psychology is concerned with the individual psychological factor and the study concerning interpersonal perception and development the measurement tool showed the tendency to continue to in-creas.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권5호
• /
• pp.706-716
• /
• 2014

A new strategy of co-inoculating Bacillus subtilis MA139 with Streptococcus thermophilus and Saccharomyces cerevisiae was used to produce fermented soybean meal (FSBM). Three experiments were conducted to determine the concentration of digestible energy (DE) and metabolizable energy (ME) (Exp. 1), apparent ileal digestibility (AID) and standardized ileal digestibility (SID) of amino acids (AA) (Exp. 2), and feeding value (Exp. 3) of FSBM produced by this new strategy (NFSB) compared with soybean meal (SBM) and conventionally available FSBM (Suprotein). In Exp. 1, twenty-four barrows (initial body weight [BW] of $32.2{\pm}1.7kg$) were randomly allotted to 1 of 4 diets with 6 replicates per diet. A corn basal diet and 3 diets based on a mixture of corn and 1 of 3 soybean products listed above were formulated and the DE and ME contents were determined by the difference method. The results showed that there were no differences in DE and ME between SBM and either FSBM product (p>0.05). In Exp. 2, eight barrows (initial BW of $26.8{\pm}1.5kg$) were fitted with ileal T-cannulaes and used in a replicated $4{\times}4$ Latin square design. Three corn-starch-based diets were formulated using each of the 3 soybean products as the sole source of AA. A nitrogen-free diet was also formulated to measure endogenous losses of AA. The results showed that the SID of all AA except arginine and histidine was similar for NFSB and SBM (p>0.05), but Suprotein had greater (p<0.05) SID of most AA except lysine, aspartate, glycine and proline than NFSB. In Exp. 3, a total of 144 piglets (initial BW of $8.8{\pm}1.2$ kg) were blocked by weight and fed 1 of 4 diets including a control diet with 24% SBM as well as diets containing 6% and 12% NFSB or 12% Suprotein added at the expense of SBM. During d 15 to 28, replacing SBM with 6% NFSB significantly improved average daily gain (ADG) and average daily feed intake (ADFI) (p<0.05) for nursery piglets. During the overall experiment, ADG of piglets fed diets containing 6% NFSB was significantly greater (p<0.05) than that of piglets fed SBM. In conclusion, fermentation with the new strategy did not affect the energy content or the AID and the SID of AA in SBM. However, inclusion of 6% NFSB in diets fed to nursery piglets improved performance after weaning likely as a result of better nutritional status and reduced immunological challenge.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.115-120
• /
• 2016

저온용 SCR 촉매인 $MnO_x$의 촉매 활성을 높이기 위해 $TiO_2$ 지지체와 함께 조촉매로서 $CeO_2$을 사용하였고, 제조된 나노 사이즈의 촉매 특성과 함께 질소산화물 제거 효율에 대해 고찰하였다. $MnO_x-CeO_2/TiO_2$ 촉매 내에서 $CeO_2$ 거동을 확인하기 위해 단일 조성의 $CeO_2$와의 차이점을 미세구조적으로 비교 분석하였다. $MnO_x-CeO_2/TiO_2$ 촉매가 졸겔법을 통해 제조되었으며 낮은 열적 특성으로 인해 평균 $285{\mu}m$ 정도의 큰 입도를 가진 단일 $CeO_2$와는 달리 Ti 지지체와 함께 합성된 촉매의 경우 130 nm 정도로 줄어들었음을 확인하였다. 투과 전자 현경을 이용한 EDS mapping를 통해 Ce-Ti의 강한 interaction이 nano-sized powder 제조의 원인인 것으로 확인하였다. 조촉매 첨가로 인해 $MnO_x/TiO_2$ 촉매에 비해 저온영역에서 20 % 이상의 효율 향상이 있었으며 이는 3성분계 촉매 내에서 $CeO_2$가 나노 사이즈로 잘 분산됨에 따라 촉매 반응에 필요한 산소이온의 교환이 활발히 일어날 수 있었기 때문이다.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.155-163
• /
• 2014

Objectives: Light-curing of resin-based materials (RBMs) increases the pulp chamber temperature, with detrimental effects on the vital pulp. This in vitro study compared the temperature rise under demineralized human tooth dentin during light-curing and the degrees of conversion (DCs) of three different RBMs using quartz tungsten halogen (QTH) and light-emitting diode (LED) units (LCUs). Materials and Methods: Demineralized and non-demineralized dentin disks were prepared from 120 extracted human mandibular molars. The temperature rise under the dentin disks (n = 12) during the light-curing of three RBMs, i.e. an Ormocer-based composite resin (Ceram. X, Dentsply DeTrey), a low-shrinkage silorane-based composite (Filtek P90, 3M ESPE), and a giomer (Beautifil II, Shofu GmbH), was measured with a K-type thermocouple wire. The DCs of the materials were investigated using Fourier transform infrared spectroscopy. Results: The temperature rise under the demineralized dentin disks was higher than that under the non-demineralized dentin disks during the polymerization of all restorative materials (p < 0.05). Filtek P90 induced higher temperature rise during polymerization than Ceram.X and Beautifil II under demineralized dentin (p < 0.05). The temperature rise under demineralized dentin during Filtek P90 polymerization exceeded the threshold value ($5.5^{\circ}C$), with no significant differences between the DCs of the test materials (p > 0.05). Conclusions: Although there were no significant differences in the DCs, the temperature rise under demineralized dentin disks for the silorane-based composite was higher than that for dimethacrylate-based restorative materials, particularly with QTH LCU.