• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.105-108
• /
• 2010

The vehicle navigation system is a representative driver supporting system that available to present searching and guiding path functions, have been increased for usability. Under competition situation because of following the spreaded navigation market, to meet customer's needs about new given services, there are need differentiated services increasing dramatically. Also now, dash board indicates various vehicle's status and driver can aware of that. However it is not easy to know where is abnormal essentially and there are no devices to give warning to driver. Therefore, It is difficult to preserve accidents because it can't deal with various abnormal functions immediately on driving. In this paper, we proposed vehicle diagnosis program within navigation that is available to manage and to make a diagnosis of vehicle. And this program conform OBD-II standard, so it can transmit diagnosis data from ECU to navigation system using Bluetooth wireless communication protocol. Thus this program give enhanced services to customer as well as multimedia and geometry information services.

• Journal of the Korea Society of Computer and Information
• /
• 제19권11호
• /
• pp.175-181
• /
• 2014

This paper suggests O(m) polynomial time heuristic algorithm to obtain the solution for the driver scheduling problem, DSP, that has been classified as NP-complete problem. The proposed algorithm gets the initial assignment of n minimum number of drivers from given m schedules. Nextly, this algorithm gets the minimum total time (TC) using 5 rules of swap and insert for decrease of over times (OT) and idle times (IT). Although this algorithm is a heuristic polynomial time algorithm with O(m) time complexity rules to be find a optimal (or approximate) solution, this algorithm is equal to metaheuristic methods for the 5 experimental data. To conclude, this paper shows the DSP is not NP-complete problem but Polynomial time (P)-problem with polynomial time rules.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제20권4호
• /
• pp.13-27
• /
• 2021

In this study, the impact of traffic flow on the market penetration rate of autonomous vehicles(AV) was analyzed using the data for the year 2020 of the Yongin IC~Yangji IC section of Yeongdong Expressway. For this analysis, a microscopic traffic simulation model VISSIM was utilized. To construct the longitudinal control of the AV, the Intelligent Driver Model(IDM) was built and applied, and the driving behavior was verified by comparison with a normal vehicle. An examination of the study results of mobility and safety according to the market penetration rate of the AV, showed that the network's mobility improves as the market penetration rate increases. However, from the point of view of safety, the network becomes unstable when normal vehicles and AVs are mixed, so there should be a focus on traffic management for ensuring safety in mixed traffic situations.

• The Journal of the Convergence on Culture Technology
• /
• 제8권6호
• /
• pp.905-910
• /
• 2022

Drowsy driving requires a lot of social attention because it increases the incidence of traffic accidents and leads to fatal accidents. The number of accidents caused by drowsy driving is increasing every year. Therefore, in order to solve this problem all over the world, research for measuring various biosignals is being conducted. Among them, this paper focuses on non-contact biosignal analysis. Various noises such as engine, tire, and body vibrations are generated in a running vehicle. To measure the driver's heart rate and respiration rate in a driving vehicle with a piezoelectric sensor, a sensor plate that can cushion vehicle vibrations was designed and noise generated from the vehicle was reduced. In addition, we developed a system for classifying whether the driver is sleeping or not by extracting the model using the CNN-LSTM ensemble learning technique based on the signal of the piezoelectric sensor. In order to learn the sleep state, the subject's biosignals were acquired every 30 seconds, and 797 pieces of data were comparatively analyzed.

• Korean Journal of Culture and Social Issue
• /
• 제22권2호
• /
• pp.285-311
• /
• 2016

This study analysed the published papers dealing with traffic behaviors since 2004 in south Korea. The following information was coded for each papers; year of publication, source, authors, main topic, and subtopic. The annual numbers of publication in 2004 and 2005 showed 6 articles and 7 articles. Since 2006, The annual numbers were increasing more than 10 papers. It means that the researches on traffic behavior were rich. The driver was main topic of 73.2% of articles. Cognition & Perception, Fatigue and Stress, and Alcohol were the main interest sub-topics dealing with main topic driver. Elderly driver was 10.4%, the interest in elderly drivers grew with population aging. And the dominant publications were Journal of traffic safety research, Journal of Korean Psychology Association, and Journal of the Koean Data Analysis Society with 60% of all articles for last 10 years.

• Journal of the Institute of Convergence Signal Processing
• /
• 제12권4호
• /
• pp.333-340
• /
• 2011

KJJVC(Korea-Japan Joint VLBI Correlator) was installed at the KJCC(Korea-Japan Correlation Center) and has been operated by KASI(Korea Astronomy and Space Science Institute) from 2009. KJNC is able to correlate the VLBI observed data through KVN(Korean VLBI Network), VERA(VLBI Exploration of Radio Astrometry), and JVN(Japanese VLBI Network) and its joint network array. And it is used exclusively as computer in order to process the observed data for the scientific purpose KJJVC used the VSI(VLBI Standard Interface) as the VLBI international standard at the data input-output specification between each component. Especially, for correlating the observed data, the data is transmitted with 1024Mbps speed between Mark5B high-speed playback and RVDB(Raw VLBI Data Buffer). The EMI(Electromagnetic lnterference), which is occurred by data transmission with high-speed, cause the data loss and the loss occurrence is frequently often for long transmission cable. Finally it will be caused the data recognition error by decreasing the voltage level of digital data signal. In this paper, in order to minimize the data loss by measuring the EMI noise level in transmission of the VSI specification, the 3 methods such as 1) RC filtering method, 2) lmpedance matching using Microstrip line, and 3) Signal buffering method using Differential line driver, were proposed. To verify the effectiveness of each proposed method, the performance evaluation was conducted by implementing and simulations for each method. Each proposed method was effectively confirmed as the high-speed data transmission of the VSI specification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제39C권2호
• /
• pp.191-198
• /
• 2014

As an NMEA 2000 is a standard for communicate to other electronic equipment, it implemented a Universal gateway based on this ship's network. To implement a NMEA 2000 based Universal gateway, it is porting a NMEA 2000 stack source and CAN device driver source to board, and then it connected a board that equip with various communication protocol(CAN, RS232, USB, Ethernet port). To verify converted ship's data to a developed gateway, it connected pc based simulater program and monitoring program to a developed board. so we can see a ship's data through NEMA 2000 network. We verified a gateway performance and analyzed a generated ship's data from simulator program through a monitoring program that was connected a gateway and NMEA 2000 network. so it was designed, implemented to allow monitoring through utilizing a communication method that user wants.

• International Journal of Highway Engineering
• /
• 제7권4호
• /
• pp.185-202
• /
• 2005

In this research, to get over restrictions of a field expreiment, we modeled a planning road through the 3D Virtual Reality and achieved data about dynamic response related to sector fluctuation and about driver's visual behavior on testers' driving the Driving Simulator Car with Eye Camera. We made constant efforts to reduce the non-reality and side effect of Driving Simulator on maximizing the accord between motion reproduction and virtual reality based on data Driving Simulator's graphic module achieved by dynamic analysis module. Moreover, we achieved data of driver's natural visual behavior using Eye Camera(FaceLAB) that is able to make an expriment without such attaching equipments such as a helmet and lense. In this paper, to evaluate the level of road's safety, we grasp the meaning of the fluctuation of safety that drivers feel according to change of road geometric structure with methods of Driving Simulator and Eye Camera and investigate the relationship between road geometric structure and safety level. Through this process, we suggest the method to evaluate the road making drivers comfortable and pleasant from planning schemes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제47권6호
• /
• pp.47-56
• /
• 2010

HDD-based RAIDs have been used in high-capacity storage systems for traditional data server. However, their data reliability are relatively low and they consume lots of power since hard disk drive is weak on shock and its power consumption is high due to frequent spindle motor operation. Therefore, this paper presents new SSD based RAID system architecture using various erasure codes. The proposed methode applys Reed-Solomon, EVENODD, and Liberation coding schemes onto file system level and device driver level, respectively. Besides, it uses data allocation method to minimize the side effect of reducing the lifespan of SSD. Detail experimental results show that Liberation code increase wear-leveling rates of SSD based RAID-6 more than other codes. The SSD based RAID system applying erasure codes at the device driver level shows better performance than that at the file system level. I/O performance of RAID-6 system using SSD is 4.5%~8.5% higher than that of using HDD and the power consumption of the RAID system using SSD is 18%~40% less than that of using HDD.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제16권5호
• /
• pp.96-108
• /
• 2017

The current collision warning and avoidance system(CWAS) is one of the representative Advanced Driver Assistance Systems (ADAS) that significantly contributes to improve the safety performance of a vehicle and mitigate the severity of an accident. However, current CWAS mainly have focused on preventing a forward collision in an uninterrupted flow, and the prevention performance near intersections and other various types of accident scenarios are not extensively studied. In this paper, the safety performance of Vision-Sensor (VS) and Radar-Sensor(RS) - based collision warning systems are evaluated near an intersection area with the data from Naturalistic Driving Study(NDS) of Second Strategic Highway Research Program(SHRP2). Based on the VS and RS data, we newly derived sixteen vehicle-to-vehicle accident scenarios near an intersection. Then, we evaluated the detection performance of VS and RS within the derived scenarios. The results showed that VS and RS can prevent an accident in limited situations due to their restrained field-of-view. With an accident prevention rate of 0.7, VS and RS can prevent an accident in five and four scenarios, respectively. For an efficient accident prevention, a different system that can detect vehicles'movement with longer range than VS and RS is required as well as an algorithm that can predict the future movement of other vehicles. In order to further improve the safety performance of CWAS near intersection areas, a communication-based collision warning system such as integration algorithm of data from infrastructure and in-vehicle sensor shall be developed.