• 제목/요약/키워드: data transmission-reception

검색결과 187건 처리시간 0.032초

신뢰성 있는 단방향 데이터 전송 시스템 설계 (Design of a Reliable Data Diode System)

  • 김동욱;민병길
    • 정보보호학회논문지
    • /
    • 제26권6호
    • /
    • pp.1571-1582
    • /
    • 2016
  • 단방향 전송 기술에서 해결해야 할 이슈들 중에 한 가지는 TCP 기반의 데이터 전송에서 발생하는 패킷 손실을 줄이는 것이다. 잘 알려진 에러 수정 기법들을 활용해서 패킷 손실을 줄일 수 있다. 하지만, 기존의 여러 기법들을 활용한다고 하더라도, 링크 에러와 버퍼 오버플로우에 의한 패킷 손실은 여전히 발생할 수 있다. 본 논문에서는 신뢰성 있는 단방향 데이터 전송 시스템(RED, REliable Data diode)을 제안한다. RED는 기존의 단방향 전송 기술과 마찬가지로 TCP 기반의 데이터 전송을 지원하기 위해 TCP 프록시 기법을 활용한다. RED 송신시스템은 TCP 패킷의 지연 전송을 활용하여 버퍼 오버플로우에 의한 패킷 손실을 줄일수 있다. 또한, RED 송신시스템은 패킷의 중요도 및 여유 자원을 고려하여, RED 수신시스템에게 다수의 동일한 패킷을 복제 및 전송함으로써, 단방향 전송 링크에서의 링크 에러에 의한 패킷 손실을 줄일 수 있다.

UWB 및 MEMS IMU 복합 센서 기반의 위치 추적 시스템 (Position Tracking System Based on UWB and MEMS IMU)

  • 권성근
    • 한국멀티미디어학회논문지
    • /
    • 제22권9호
    • /
    • pp.1011-1019
    • /
    • 2019
  • In this paper, we propose a system that can more precisely identify and monitor the position of the tool used in the assembling workplace such as automobile production. The proposed positioning monitoring system is a combination of UWB communication module and MEMS IMU sensor. Since UWB does not need modulation and demodulation function and has low power density, UWB is widely used in indoor positioning field. However, it may cause positioning error due to errors in RF transmission and reception process, which may cause positioning accuracy. Therefore, in this paper, we propose an algorithm that uses IMU as an auxiliary means to compensate for errors that may occur in positioning using only UWB. The tag and anchor of UWB module measure the transmission / reception time by transmitting signals to each other and then estimate the distance between tag and anchor. The MEMS IMU sensor serves to provide positioning calibration information. The tag, which is a mobile node and attached to a moving tool, measures the three-dimensional position of the tool and transfers the coordinate data to the anchor. Thus, it is possible to confirm whether or not the specific tool is properly used according to the prescribed regulations.

4대강 주변 하천모니터링을 위한 무선 메쉬 네트워크 전파환경 분석 및 구축(합천보 중심으로) (Propagation Environment Analysis and Wireless Mesh Network Implementation for monitoring the Four Rivers (based on Hapcheon weir))

  • 홍성택;진력민
    • 한국인터넷방송통신학회논문지
    • /
    • 제12권6호
    • /
    • pp.127-134
    • /
    • 2012
  • 우리나라의 4대강 사업은 홍수피해와 물부족을 근본적으로 해결하고 수질개선과 하천복원으로 건전한 수생태계 조성은 물론 국민 여가문화 수준 및 삶의 질 향상을 도모하고자 하였으며, 안정적인 하천관리를 위해서 수십 km ~ 수백 km에 이르는 하천지역의 각종 관측데이터를 모니터링하는 것이 필수적이다. 4대강 사업중 낙동강 권역의 합천보는 총 21.21 km 구간으로 무선 네트워크의 하나인 무선 메쉬망을 자체망을 구축하였다. 망 구축시 주변 지역의 특성을 고려하여 최소비용으로 안정적인 서비스를 구현하기 위하여 LOS 시험 및 수신레벨 분석, 통신속도 측정 등 전파 환경 분석을 실시하였으며, 모든 개소에서 수신레벨이 -55 dBm ~ -70 dBm 되는 것을 확인하였으며, 데이터 전송속도도 20 Mbps 이상이 되는 것을 확인하였다. 이는 기존 상용망이 가지는 전송속도, 음영지역의 문제를 해결할 수 있을 뿐만 아니라 망관리시스템을 통하여 상시 망 관리를 통하여 안정적인 서비스를 구현할 수 있도록 함으로써 무선 메쉬 네트워크가 하천 모니터링 서비스와 같은 국가 Infra에도 널리 이용 가능함을 보여주고 있다.

신뢰성 있는 이미지 전송 기법을 적용한 전자 가격표시 시스템의 설계 및 구현 (Design and Implementation of Electronic Shelf Label System using Technique of Reliable Image Transmission)

  • 양은주;정승완;유길상;김정준;서대화
    • 한국멀티미디어학회논문지
    • /
    • 제18권1호
    • /
    • pp.25-34
    • /
    • 2015
  • Recently, in distribution market, demand for electronic shelf label system is increasing gradually to provide the accurate price immediately and detailed product information to consumers and reduce operation costs. Most of electronic shelf label system companies develop the full-graphic display device to display a wide variety of product information as well as the exact price. Our system had introduced Go-Back-N retransmission method in the early. However, we encountered performance problems that it delayed updating of the electronic shelf label system and exhausted the battery life time. Proposed adaptive image retransmission technique based on the selective scheme is that tags of electronic shelf label system recognize idle time of transmission cycle and require partial image retransmission to sever by itself. As a result, it can acquire much more opportunities of partial image retransmission within the same period and increase reception rate of full image for each tags. The experimental result shows that adaptive image retransmission technique's reception rate of full image for each tags is approximately 4% higher than existing previous works. And total battery life time increases 30 hours because tag reduce wake-up time as it receive only lost data instead of whole data.

시변채널 모델에서 다중 탭 갱신 알고리즘에 관한 연구 (A Study on the Multi-Tap Update Algorithm in Time Variant Channel Model)

  • 이승대
    • 한국컴퓨터산업학회논문지
    • /
    • 제7권1호
    • /
    • pp.39-46
    • /
    • 2006
  • 고속의 데이터 전송에 대한 채널의 왜곡을 보상하기 위해 다중 경로 다이버시티 수신을 수행하였다. 다이버시티 가지에 보상 알고리즘을 결합한 수신 구조를 갖는 DS/BPSK 시스템을 구성하고 시스템의 성능을 SNR에 따른 평균 비트 에러율 관점에서 평가하였다. 상호부호간 간섭을 극복하기 위해 L 개의 다이버시티 가지에 비선형 탭 지연선 구조를 사용하고 보상 알고리즘에 따라 탭 계수가 시변채널에 적응하도록 하였다. 그 결과 일반적인 보상 알고리즘에 비해 제안한 알고리즘의 평균 비트 에러율이 $10^{-2}$ 정도 개선되었다.

  • PDF

비동기식 MAC프로토콜 기반의 무선 센서 네트워크에서 단대단 시간 지연 성능 향상을 위한 멀티 홉 예약 기법의 제안 (A Multi-hop Reservation Method for End-to-End Latency Performance Improvement in Asynchronous MAC-based Wireless Sensor Networks)

  • 홍성화;정석용
    • 한국산학기술학회논문지
    • /
    • 제11권7호
    • /
    • pp.2638-2647
    • /
    • 2010
  • 긴 preamble을 사용하는 비동기식 MAC 프로토콜의 문제점을 개선하기 위해 나온 프로토콜이 X-MAC 이다. 본 논문에서는 X-MAC의 문제점을 해결하기 위하여 Express-MAC이라는 새로운 MAC프로토콜을 제안하였다. 무선센서 네트워크는 주로 이벤트 데이터나 상황정보를 인지하는 목적에 많이 사용된다. 특히 침입감지 같은 이벤트 감지를 목적으로 하는 센서네트워크의 전송 패턴은 매우 간헐적이면서도 한 번의 이벤트 발생 시 연속적으로 일어나는 것이 대부분이다. EX-MAC은 위와 같은 센서 네트워크의 주요 전송 패턴을 반영하여 첫 이벤트 발생 시 데이터 전송에서 멀티 홉 경로의 채널 예약 및 awake 구간의 전송 시간 예약 방식을 사용하였다. 전송 경로상의 awake 시간 예약은 연속적인 데이터 전송의 단대단 지연 성능을 향상시켰으며 데이터 송수신 노드의 preamble 길이를 줄임으로써 에너지 소비 측면에서도 효율성을 증대시켰다.

지그비 통신을 이용한 지중저압접속함 원격 모니터링 시스템 설계 및 구현 (Design and Implementation of Remote Monitoring System for Underground Low Voltage Handhole Using Zigbee Communication)

  • 원라경
    • 한국ITS학회 논문지
    • /
    • 제18권3호
    • /
    • pp.58-67
    • /
    • 2019
  • 한전의 저압전송전선로로 이용되고 있는 지중저압접속함은 지중선로의 분기나 접속을 목으로 하고 있다. 지중저압접속함은 거리의 미관을 고려하는 효용성에 비하여 여름철 집중호우나 도로의 침수에 의하여 감전사고가 발생하는 등 안전대책이 필요하다. 본 논문에서는 지중저압접속함 내부에 온습도, $CO_2$, 수위, 가속도, 진동 센서를 장착하고 센서 데이터를 지그비모듈을 이용하여 지상으로 데이터를 전송한다. 지상과의 통신을 위한 안테나(볼티드 안테나)를 제안하여 이를 통한 데이터 수신을 확인하였다. 전송된 데이터는 LF 모드 및 HEX모드에서 완벽한 수신 성공률이 확인되었으며, 볼티드 안테나는 난환경 사태에서 실험한 결과 지중상태와 수중상태의 차이는 보이고 있으나, 지중저압접속함으로부터 10m 정도 떨어진 지상과의 통신에는 충분히 수신감도라고 판단되었다. 수신된 데이터는 PC기반의 GUI를 통해 확인할 수 있었다.

바이너리 CDMA 기술을 이용한 무선 배전 자동화 시스템의 구현 (Implementation of Wireless Distribution Automation System using Binary CDMA Technology)

  • 권대길;조진웅;홍대기
    • 전기학회논문지P
    • /
    • 제61권4호
    • /
    • pp.239-244
    • /
    • 2012
  • In this paper, we first introduce our own binary CDMA technology. Then we propose a wireless distribution automation system using the binary CDMA technology. The major research items are the binary CDMA distribution automation system, piconet configuration for remote control and monitoring, scheduling for the transmission and reception of data, and ways of applying encryption to protect wireless packet. To verify the possibility of applying wireless transmission to the distribution automation system, we experiment the implemented system in terms of the transmission rate by applying it to a real-world environment.

LPWA 기반 산업현장의 무선 데이터 전송 시스템 개발 (Development of Wireless Data Transmission System for LPWA-based Industrial Sites)

  • 권혁;조경우;오창헌
    • 한국항행학회논문지
    • /
    • 제22권1호
    • /
    • pp.37-42
    • /
    • 2018
  • 최근 장비에 부착된 센서들이 네트워크를 통해 실시간으로 현장 정보를 전송하고 처리하여 장비를 제어하는 과정을 자동으로 수행하는 IoT 환경에 대한 연구가 다방면으로 진행되고 있다. 이러한 시스템의 핵심은 데이터 송수신을 위한 네트워크가 필수적인데 넓은 전송 거리를 가진 유선 네트워크가 우선 선택이 된다. 하지만 유선 네트워크의 경우 통신을 구성하기위해 소모되는 시간과 비용이 무선 보다 높은 문제가 존재한다. 본 논문에서는 이러한 문제를 해결하기 위해 LPWA와 BLE 통신을 이용한 LPWA 기반 산업현장의 무선 데이터 전송 시스템을 제안한다. 제안하는 시스템은 BLE를 통해 장비로부터 데이터를 수집하고 LPWA를 이용하여 서버로 데이터를 전송하는 시스템이다. 실험결과 LPWA로 전송할 수 있는 최대 길이의 확산인자(Spreading Factor)는 8인 것을 확인하였으며, 최소 길이에 대한 Spreading Factor는 9인 것을 확인할 수 있었다.

Multiple Access Control of RS232C Serial Communications Interface

  • Kyongho Han;Park, Cheon-Won
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.639-641
    • /
    • 2002
  • In this paper, we proposed the multiple access control of RS232C Serial Communications protocol using collision sense method. The communications wires of data transmission and reception are tied together through the buffer each to connect to the multiple communication channels. The hardware interface and control program are designed to build the prototype system and the experimental multiple access communications network is built by multiple PC systems and the transfer completion rate results are shown.

  • PDF