• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.6
• /
• pp.1571-1582
• /
• 2016

One of the issues, which is dealed with in undirectional data transmission technology, is reducing the packet loss in TCP based data transfer. We can decrease the packet loss by using several well known error correction approaches. Although we utilize those previous approaches, the packet loss by both link errror and buffer overflow could be occurred. In this paper, we propose the RED(REliable Data diode). RED also uses the TCP proxy approach for supporting the TCP based data transfer which is similar with the existing unidirectional data transmission technologies. The RED transmission system could alleviate the packet loss caused by buffer overflow by exploiting the delaying transmission of TCP packets. Furthermore, in order to reduce the packett loss caused by link error in the unidirectional transmission link, the RED transmission system transmits one or more duplicated packets to the RED reception system by considering both the remaining resources and packet importance.

• Journal of Korea Multimedia Society
• /
• v.22 no.9
• /
• pp.1011-1019
• /
• 2019

In this paper, we propose a system that can more precisely identify and monitor the position of the tool used in the assembling workplace such as automobile production. The proposed positioning monitoring system is a combination of UWB communication module and MEMS IMU sensor. Since UWB does not need modulation and demodulation function and has low power density, UWB is widely used in indoor positioning field. However, it may cause positioning error due to errors in RF transmission and reception process, which may cause positioning accuracy. Therefore, in this paper, we propose an algorithm that uses IMU as an auxiliary means to compensate for errors that may occur in positioning using only UWB. The tag and anchor of UWB module measure the transmission / reception time by transmitting signals to each other and then estimate the distance between tag and anchor. The MEMS IMU sensor serves to provide positioning calibration information. The tag, which is a mobile node and attached to a moving tool, measures the three-dimensional position of the tool and transfers the coordinate data to the anchor. Thus, it is possible to confirm whether or not the specific tool is properly used according to the prescribed regulations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.127-134
• /
• 2012

Four river project in the South Korea contributes to solve flood damages and water shortages. Also, it has purpose for creating water ecosystem and improving the level of people' cultural leisure and quality of life through inducing water quality improvement and river restoration. It is necessary to monitor a variety of observing data in river areas among dozens to hundreds of kilometer for safe river administration. The 20th construction area of the four river project is located on Hapcheon areas, where wireless mesh network was installed to manage the basin. In the process of network construction, the characteristic of surrounding areas is considered about embodying secure service by investing the least expense. Besides, transmission environment analysis is performed such as LOS tests and reception level analysis, and transmission speed measurement to create safe service. Reception level in all places is confirmed among -55 dBm ~ -70 dBm, and data transmission speed proves more than 20 Mbps.

• Journal of Korea Multimedia Society
• /
• v.18 no.1
• /
• pp.25-34
• /
• 2015

Recently, in distribution market, demand for electronic shelf label system is increasing gradually to provide the accurate price immediately and detailed product information to consumers and reduce operation costs. Most of electronic shelf label system companies develop the full-graphic display device to display a wide variety of product information as well as the exact price. Our system had introduced Go-Back-N retransmission method in the early. However, we encountered performance problems that it delayed updating of the electronic shelf label system and exhausted the battery life time. Proposed adaptive image retransmission technique based on the selective scheme is that tags of electronic shelf label system recognize idle time of transmission cycle and require partial image retransmission to sever by itself. As a result, it can acquire much more opportunities of partial image retransmission within the same period and increase reception rate of full image for each tags. The experimental result shows that adaptive image retransmission technique's reception rate of full image for each tags is approximately 4% higher than existing previous works. And total battery life time increases 30 hours because tag reduce wake-up time as it receive only lost data instead of whole data.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.1
• /
• pp.39-46
• /
• 2006

Multipath diversity reception is applied to the compensation of the distortion of channel, which occurs in transmission of data at rapid speed. DS/BPSK systems are composed of the equipment with reception structure combined with a compensation algorithm to diversity branch. The efficiency of the system is evaluated from the point of view of average bit error rate according to SNR. In order to remove intersymbol interference, this algorithm is applied to time-invariant channel at every diversity branch with the number of L. As a result, the average bit error rate is saturated by $10^{-2}$ at the conventional compensation algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2638-2647
• /
• 2010

X-MAC reduces transmission delay and energy consumption by using a short preamble instead of the existing long preamble. To solve the problem of X-MAC, this paper proposes a new MAC protocol called Express-MAC. The wireless sensor network is mainly used for the purpose of gathering event data or situation information. Especially, the transmission pattern of the sensor network with the purpose of event detection such as intrusion detection is very intermittent as well as successively occurring when a single event takes place in most cases. By reflecting sensor network's key transmission patterns as above, EX-MAC has used multi-hub path's path reservation system and awake section's transmission time reservation method in data transmission when the first event takes place. The awake time reservation in transmission path has improved successive data transmission's end-to-end delay, and it has also increased efficiency in terms of energy consumption by reducing the preamble length of data transmission and reception node.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.58-67
• /
• 2019

The low-voltage connection box used as a low-voltage transmission line of KEPCO is intended to branch or connect to an underground line. In comparison with the utility considering the aesthetics of the distance, and safety measures are needed. In this paper, temperature and humidity, $CO_2$, water level, acceleration, and vibration sensor are installed inside the underground low voltage handhole, and the sensor data is transmitted to the ground using the Zigbee module. Antenna (Bolted Antenna) for communication with the ground was proposed and the data reception through it was confirmed. In the LF mode and the HEX mode, the transmitted data was confirmed to be a perfect reception success rate. In the case of the bolted antenna, the difference between the ground state and the underwater state was observed as a result of the experiment in the environmental environment. However, It was judged that reception sensitivity was sufficient for communication. The received data could be confirmed through PC based GUI.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.239-244
• /
• 2012

In this paper, we first introduce our own binary CDMA technology. Then we propose a wireless distribution automation system using the binary CDMA technology. The major research items are the binary CDMA distribution automation system, piconet configuration for remote control and monitoring, scheduling for the transmission and reception of data, and ways of applying encryption to protect wireless packet. To verify the possibility of applying wireless transmission to the distribution automation system, we experiment the implemented system in terms of the transmission rate by applying it to a real-world environment.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2018

Recently, there have been many studies on the IoT environment in which the sensors attached to the equipment automatically transmit and process the site information in real time through the network to control the equipment. The core of such a system is a network for data transmission and reception, and a wired network with wide transmission distance is a priority. However, in the case of a wired network, there is a problem that the time and cost consumed to configure the communication is higher than that of the wireless. In this paper, we propose LPWA - based wireless data transmission system using LPWA and BLE communication to solve this problem. The proposed system collects data from equipment through BLE and transmits data to the server using LPWA. Experimental results show that the spreading factor of maximum length of LPWA is 8, and the minimum length is 9.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.639-641
• /
• 2002

In this paper, we proposed the multiple access control of RS232C Serial Communications protocol using collision sense method. The communications wires of data transmission and reception are tied together through the buffer each to connect to the multiple communication channels. The hardware interface and control program are designed to build the prototype system and the experimental multiple access communications network is built by multiple PC systems and the transfer completion rate results are shown.