• 터널과지하공간
• /
• 제10권3호
• /
• pp.447-456
• /
• 2000

일반적으로 암반 구조물의 안정성에 심각한 영향을 미칠 수 있는 것으로 알려진, 암반 내의 rock bridges는 일종의 opening-mode fracture로 간주될 수 있다. 초창기에는 재료의 저항 특성을 고려하여 rock bridges 자체의 거동 특성에 대한 연구가 있었으나, 최근에 와서는 수치 해석적 연구를 통해 파괴역학의 개념을 적용하여 rock bridges의 분포특성이 암반 구조물의 안정성에 미치는 영향 등을 새롭게 연구하고 있다. 본 연구에서는 rock bridges가 수압파쇄 균열의 분포특성에 미치는 영향을 규명하고자, rock bridges의 분포형태에 따른 암반 내 응력 분포 특성과 균열의 bridge 현상을 먼저 살펴보았다. 즉 , 균열의 길이에 대한 균열의 간격의 비 (s/L 비) 균열의 길이에 대한 균열의 오버랩의 비 (d/L 비)를 변화시키면서 응력 분포 특성을 수치 해석적으로 살펴본 결과, 2개의 균열만으로도 여러 개의 균열 분포 특성을 대표할 수 있음을 알았고, s/L 비가 감소할수록 또는 d/L비가 증가할수록 암반 내 응력 집중은 커짐을 알 수 있었다. 이러한 수치 해석결과를 토대로, 수압파쇄 균열과 rock bridges의 상호 관계를 수치 해석적으로 연구한 결과, rock bridges가 없을 경우 탄성이론에 맞게 발전하던 수압파쇄 균열이, rock bridges의 존재에 의해 수압파쇄 균열의 전파 방향이 왜곡됨은 물론 수압파쇄 균열에 수직으로 작용하는 원거리 응력도 정확히 표현하지 못함을 알았다. 즉 , 수압파쇄 균열 선단에서의 mode I 응력집중계수는 s/L비가 감소할수록 또는 d/L 비가 증가할수록 커짐을 알 수 있었다. 이러한 연구결과로부터, 균열의 분포특성을 규명하기 위해 노두에서 일반적으로 실시되는 scanline 조사에서 얻을 수 있는 s/L 비와 d/L 비를 통하여 암반 내에 존재하는 응력의 평가 방법이 새로이 제안할 수 있을 것이다.로 제안하였다. 본 노천채탄장의 최종사면과 같이 장기적인 유지를 필요로 하는 사면은 사면의 변형거동을 감시하기 위해 보다 체계적인 계측을 필요로 하며, 또한 사면이 많은 비에 노출되기 쉽기 때문에 사면의 풍화와 침식에 대한 대책연구도 수행되어야 한다. 이 값이 감소할수록 Cox-Merz 법칙은 더욱 잘 성립한다.$_{TM4}$/$\bar{p}$$_{TM2}$, $\bar{p}$$_{TM4}$/$\bar{p}$$_{TM1}$, log($\bar{p}$$_{TM4}$/$\bar{p}$$_{TM3}$) 등과 상관이 높게 나타났다.이 소요되었고, 우리 나라 자연환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가 가능하다. 한편 이같은 중금속이온의 흡착실험은 특히

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권9호
• /
• pp.595-602
• /
• 2013

WiFi 신호지도법은 실내 환경을 위한 효과적인 위치 추적 기술로 잘 알려져 있다. 하지만 이 기술은 주어진 공간 전역에 걸쳐 미리 구축된 대용량의 신호지도가 있어야 적용할 수 있다. 또한 이 기술을 적용하기 위해서는 환경이 변함에 따라 전문가에 의해 주기적으로 새로운 신호지도를 구축하거나 변경하는 작업이 필요하다. 최근 들어 이러한 문제점을 극복하기 위한 한 가지 방법으로서, 군중-제공 신호지도 작성 방식이 많은 연구자들의 관심을 모으고 있다. 이 방식은 다수의 자발적인 사용자들로 하여금 특정 공간에서 수집한 자신들의 신호지도를 다른 사람들과 함께 서로 공유할 수 있도록 해준다. 따라서 군중-제공 신호지도 방식을 이용하면 신호지도를 자동으로 최신의 상태로 변경할 수 있다. 하지만, 대부분의 군중-제공 신호지도 작성 시스템들에서는 사용자들이 자신의 위치를 스스로 판단하여 수작업으로 직접 입력하도록 요구하고 있다. 그 뿐만 아니라, 이들 시스템에서는 다수의 사용자들로부터 수집되는 신호지도들 중에서 오류가 있는 것들을 찾아내고 이들을 여과해주는 체계적인 메커니즘을 가지고 있지 않다. 본 논문에서는 군중-제공 신호지도 작성 및 위치 추적(CMAL) 시스템의 설계에 대해 소개한다. 본 논문에서 제안하는 시스템은 다수의 스마트폰 사용자들로부터 수집된 지역 신호지도들을 이용하여 자동으로 공유 신호지도를 구축/갱신할 수 있을 뿐만 아니라, 동시에 새로운 신호지도를 이용하여 각 스마트폰 사용자의 위치를 추적할 수 있는 기능을 제공한다. 본 시스템은 각 스마트폰에서 신호지도를 수집하는 다수의 클라이언트들과, 공유 신호지도 데이터베이스를 관리하는 중앙의 서버로 구성된다. 각 클라이언트에는 스마트폰 사용자의 실시간 위치를 추적하면서 동시에 지역 신호지도를 생성하는 파티클 필터-기반의 WiFi SLAM 엔진을 내장하고 있으며, 서버에는 공유 신호지도의 무결성 유지를 위한 가우시안 보간법 기반의 오류 여과 알고리즘을 채택하고 있다. 다양한 실험들을 수행한 결과를 통해, 본 논문에서 제안한 시스템의 높은 성능을 확인할 수 있었다.

• 만화애니메이션 연구
• /
• 통권28호
• /
• pp.235-263
• /
• 2012

본 연구는 문화콘텐츠 비즈니스의 한 분야인 테마파크 비즈니스와 관련하여, 기존의 대규모 야외 복합 테마파크 중심의 접근에서 벋어나 소규모 소자본 전략의 실내 테마파크를 지향하는 흐름에 주목하고 있다. 기존의 대규모 야외 복합 테마파크가 수천억 원 규모의 자본과 고난이도의 기술력, 최신 운영 노하우 등을 필요로 함으로써 큰 리스크와 함께 높은 신규 진입장벽을 가지고 있는 것에 반해, 최근의 실내 테마파크들은 효율적인 리스크 관리와 탄력적인 시장전략으로 시장진입에 성공하고 있기 때문이다. 본 연구에서는 이러한 실내 테마파크들 가운데 새로운 시장인 국산 캐릭터를 테마로 한 어린이 실내 테마파크 시장의 현황을 살펴보고, 국산 캐릭터의 프로퍼티 가치 확장과 국내 테마파크 시장의 확산이라는 두 가지 확장의 측면에서 이 시장의 시장전략을 살펴보고자 한다. 이를 위해 테마파크에 관한 선행연구들을 검토하여 공간적 분류와 테마별 분류, 주 사용자층에 따른 분류 등을 기준으로 국내에 존재하는 테마파크의 유형을 나누어보았다. 또한 국산 캐릭터를 테마로 한 어린이 실내 테마파크 가운데 수도권 소재 5개소를 직접 방문하여 현황조사를 실시하였고, 수도권 소재 2개소와 지방 4개소는 업체 담당자를 통해 현황자료를 입수하여 분석하였다. 또 올 4월 25일 신규 개관한 '디보빌리지' 청계천점을 방문한 관람객을 대상으로 만족도 조사를 시행하여 분석하였다. 이를 통해 현재 국산 캐릭터를 테마로 한 어린이 실내 테마파크 비즈니스의 구조를 분석하고 수행중인 시장전략의 유효성을 분석할 수 있는 토대를 제시하여 보았다. 본 연구를 통하여 테마파크 비즈니스의 틈새시장이라 할 수 있는 실내 테마파크 비즈니스에 대한 체계적이고 심도 있는 논의의 단초를 마련하여 소규모 지역밀착형 실내 테마파크들이 국내 테마파크 산업의 유력한 비즈니스 모델로 연구될 수 있기를 기대한다. 또한 캐릭터 비즈니스의 측면에서도 국산 애니메이션 캐릭터들의 프로퍼티 가치의 공간적 스토리텔링적 확장의 새로운 모델을 정립하는 계기가 될 수 있기를 바란다.

• 한국조경학회지
• /
• 제49권5호
• /
• pp.125-137
• /
• 2021

도심에 위치한 좁고 오래된 골목길이 뜨는 상권이 되어 사람들의 발길을 끄는 현상을 미학적 관점에서 어떻게 설명할 수 있을까. 본 연구는 이면도로라는 입지와 소규모 점포의 집합을 조건 삼는 도심 골목상권 특유의 미적 경험을 논하고, 서울시 관악구에 위치한 샤로수길을 사례로 하여 그 경관적 양상을 탐구하고자 한다. 도심 골목상권의 미적 경험은 공간적 측면에서 크고 정제된 대로변 도시 조직과의 대비를 통해, 시간적 측면에서 오래된 것/새로운 것의 조화와 알려진 것/덜 알려진 것의 길항을 통해 발생한다. 샤로수길의 물리적 현황을 살펴본 결과, 2000년대 지어진 고층건물을 지나 1970년대 후반 이후의 다양한 건축연한을 지닌 저층 건축군으로 들어서는 진입 과정과 노포, 신규 점포가 어우러지는 골목 내부의 가로 경관으로 볼 때 샤로수길은 도심 골목상권의 미적 경험을 발생시키는 환경을 갖추었다고 판단된다. 샤로수길의 도심 골목상권 부상과 연계하여 관악구청은 명칭, 간판, 포장을 중심으로 가로 정비사업을 시행하였으며, 전술한 미적 경험에 비추어 그 영향을 검토한 결과는 다음과 같다. 첫째, '샤로수길' 명칭의 공식화는 대상지를 장소특정성으로부터 탈피하게 하고 대안성을 획득하게 하였다. 둘째, 노포의 간판 개선사업은 상업 주체의 측면에서 신/구 조화를 추구하지만 이미지의 측면에서는 시간성의 뒤섞임을 발생시킨다. 셋째, 보행자우선도로 조성 사업에서 노면의 포장은 골목 정체성을 강화하고 영역을 가시화하는 장치로 기능한다. 도심 골목상권의 현실이 이용자의 방문, 즉 체험에 좌우된다는 점을 상기할 때, 감각과 미학의 관점에서 도심 골목상권의 경관을 해석한 본 연구의 시각은 관련 제도와 데이터 기반 연구에 시사점을 줄 수 있을 것이다.

• 한국조경학회지
• /
• 제49권3호
• /
• pp.11-28
• /
• 2021

대형공원은 그 크기와 복잡한 특성 때문에 기존 도시 내에 조성되는 기회가 흔하지 않다. 또한, 대규모 부지에서의 식재설계 방법에 관한 실천적 연구 역시 부족한 상황이다. 본 연구는 광주광역시 중앙공원을 사례로 대형공원에서의 식재설계 접근방법과 생태적 이론이 실질적인 식재설계 방법으로 구체화 되는 과정을 설계가의 관점에서 설명함으로써, 유사한 규모의 공간 설계 시 시사점을 제공하고자 하였다. 이 연구는 구체적인 식재설계의 선행과정으로서, 거시적인 스케일에서 녹지의 연결, 식생의 변화, 경관의 흐름, 오픈스페이스의 분포 등 공원 전체의 녹지구조를 계획하고, 나아가 녹지구조를 구성하는 식생형과 식물군락의 구조를 제안하였다. 이 연구의 결과물은 식재 설계 단계에서 공간의 기능과 성격, 식재 연출효과 등 설계자의 의도와 해석을 담아 탄력적으로 적용될 수 있다. 이러한 접근법의 의의는 대형공원의 복잡성과 규모에도 불구하고, 계획된 범주 내에서 설계를 진행함으로써 첫째, 기존 수림을 포함한 공원전체 경관의 시각적 일관성과 의도된 질서를 유지할 수 있다는 점과, 둘째, 대형공원이 지닌 변동가능성, 예측불가능성 등의 특성에 효과적으로 대응할 수 있다는 것이다. 연구의 세부 내용은 다음과 같다. 녹지계획에 우선하여 대상지의 물리적 환경을 분석하였다. 특히, 토지이용변화를 분석하여 잠재된 서식처로서 습지와 초지의 가능성을 확인했다. 녹지구조는 서식처 유형에 따른 식생형으로 구성되며, 녹지의 모양, 배치, 관계에 대한 계획과 함께 식생형을 구성하는 식물군락의 특징과 목록도 제시하였다. 각 식물군락은 지역의 자연식생을 참고하여 군락의 구조를 모델화하였다. 특히, 이 모델은 특정식물군락을 목표로 한 것이 아니라 기대하는 효과에 부합되는 군락을 개념화한 것이므로 식생형의 조건과 군락의 목표에 부합된다면 다른 식물군락도 이 모델에 적용하여 대안으로 활용할 수 있는 유연함을 갖는다. 본 연구의 한계점으로는 첫째, 생태적 공원의 식재설계임에도 불구하고, 야생동물 및 조류, 곤충 등을 위한 서식환경에 대해 충분히 고려하지 못하였고, 둘째, 대상지내 기존 산림, 특히 조림 숲에 대한 관리 방안이 계획에서 배제되었으며, 셋째, 식물군락 모델계획은 기존의 식물사회학 연구를 참고하여 자연의 식물군락구조를 적용하였는데, 일부 식물군락의 경우 정량적이고 객관적인 기준의 적용에 한계가 있었다는 점 등을 들 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• Tuberculosis and Respiratory Diseases
• /
• 제54권2호
• /
• pp.219-229
• /
• 2003

배경 및 목적 : 농흉과 합병된 부폐렴성 흉막 삼출의 치료에서 가장 중요한 것은 적절한 항생제 투여와 빠른 배액이다. 흉관 삽관은 소방이 형성되는 경우나 접근이 어려운 경우 성공률이 낮으며, 혈흉, 장기손상, 횡격막 파열, Hornor 증후군 등의 합병증이 보고되는 침습적 술기로, 최근에는 영상 유도에 의한 pigtail 도관 배액술(pigtail catheter drainage, PCD)이 시행되고 있다. 이에 저자 등은 농흉 및 합병된 부폐렴성 흉막 삼출 환자에서 PCD의 유용성을 알아보고자 후향적 연구를 시행하였다. 대상 및 방법 : 1998년 1월부터 1999년 6월까지 가천 의대 길병원에서 농흉 및 합병된 부폐렴성 흉막삼출로 진단되어 PCD시술을 받은 45명을 대상으로, 진단 당시 증상, 음주 및 흡연력, 혈액 검사 소견, 흉수 검사 소견, 방사선 소견(도관 삽관시, 도관 제거시, 도관 제거 한달 후), 삽관 후 24시간 배액량, 삽관 기간, 삽관 후 입원 기간, 외과적 처치여부 등을 조사하여 다음과 같은 결과를 얻었다. 결 과 : 대상환자의 남녀비는 42 : 3, 연령은 중앙값 52세(21~74)이었다. 농흉 환자는 23명, 합병된 부폐렴성 흉막 삼출 환자는 22명이었고, 이 중 PCD만을 시행받았던 4명(3명 : 부폐렴성 흉막삼출, 1명 : 농흉)의 환자가 추적관찰에서 탈락되었다. 이들을 제외한 나머지 환자들 중 36명(80%)에서 PCD 또는 PCD와 유로키나제 사용으로 배액이 가능하였으며, 농흉 환자 23명 중 5명(27.1%)만이 외과적 수술을 시행받았고(흉막 박피술 1명, 개방성 흉강 배액술 3명), 이 중 1명이 사망하였다. PCD만 시행 받은 환자군과 PCD와 유로키나제를 사용한 환자군에서 삽관 기간, 삽관 후 재원 기간 및 24시간 평균 배액량은 유의한 차이가 없었다. PCD만 시행 받은 환자군과 수술적 처치를 받은 군 간에 24시간 평균 배액량의 유의한 차이는 없었으며, 삽관 기간($9.4{\pm}5.25$일 vs. $19.2{\pm}9.42$일, p<0.05), 삽관 후 재원 기간($15.9{\pm}10.45$일 vs. $38.60{\pm}11.5$일, p<0.01)이 수술적 처치를 받은 군에서 더 긴 것으로 나타났다. 또한 PCD와 유로키나제를 사용한 군과 수술적 처치를 받은 군 사이에서도 24시간 평균 배액량의 차이는 없었고 삽관 기간($11.1{\pm}7.35$일 vs. $19.2{\pm}9.42$일, p<0.05)과 삽관 후 재원 기간($17.5{\pm}9.17$일 vs. $38.6{\pm}11.46$일, p<0.01)에 유의한 차이가 있었다. PCD 단독 또는 PCD와 유로키나제를 병행하여 사용한 40명의 환자 중 추적관찰시 탈락된 4명을 제외하고 16명(44.4%)에서 도관 제거시 75% 이상 흉수가 감소하였으며, 17명(47.2%)에서는 50~75%, 1명에서는 25~50% 감소하였고, 2명에서는 25% 미만으로 감소하였다. 도관 제거 한 달 후에는 1명을 제외한 35명(97.2%)이 50% 이상의 호전을 보였다. 추적 관찰 기간 중 pigtail 도관 삽관시 특기할 만한 합병증은 없었다. 결 론 : PCD는 농흉 및 합병된 부폐렴성 흉막 삼출 환자에서 심각한 합병증 없이 효과적으로 조기에 배액할 수 있는 유용한 시술로 사료된다.

• 유통과학연구
• /
• 제8권3호
• /
• pp.49-56
• /
• 2010

At the initial stage of Internet advertising, banner advertising came into fashion. As the Internet developed into a central part of daily lives and the competition in the on-line advertising market was getting fierce, there was not enough space for banner advertising, which rushed to portal sites only. All these factors was responsible for an upsurge in advertising prices. Consequently, the high-cost and low-efficiency problems with banner advertising were raised, which led to an emergence of keyword advertising as a new type of Internet advertising to replace its predecessor. In the beginning of 2000s, when Internet advertising came to be activated, display advertisement including banner advertising dominated the Net. However, display advertising showed signs of gradual decline, and registered minus growth in the year 2009, whereas keyword advertising showed rapid growth and started to outdo display advertising as of the year 2005. Keyword advertising refers to the advertising technique that exposes relevant advertisements on the top of research sites when one searches for a keyword. Instead of exposing advertisements to unspecified individuals like banner advertising, keyword advertising, or targeted advertising technique, shows advertisements only when customers search for a desired keyword so that only highly prospective customers are given a chance to see them. In this context, it is also referred to as search advertising. It is regarded as more aggressive advertising with a high hit rate than previous advertising in that, instead of the seller discovering customers and running an advertisement for them like TV, radios or banner advertising, it exposes advertisements to visiting customers. Keyword advertising makes it possible for a company to seek publicity on line simply by making use of a single word and to achieve a maximum of efficiency at a minimum cost. The strong point of keyword advertising is that customers are allowed to directly contact the products in question through its more efficient advertising when compared to the advertisements of mass media such as TV and radio, etc. The weak point of keyword advertising is that a company should have its advertisement registered on each and every portal site and finds it hard to exercise substantial supervision over its advertisement, there being a possibility of its advertising expenses exceeding its profits. Keyword advertising severs as the most appropriate methods of advertising for the sales and publicity of small and medium enterprises which are in need of a maximum of advertising effect at a low advertising cost. At present, keyword advertising is divided into CPC advertising and CPM advertising. The former is known as the most efficient technique, which is also referred to as advertising based on the meter rate system; A company is supposed to pay for the number of clicks on a searched keyword which users have searched. This is representatively adopted by Overture, Google's Adwords, Naver's Clickchoice, and Daum's Clicks, etc. CPM advertising is dependent upon the flat rate payment system, making a company pay for its advertisement on the basis of the number of exposure, not on the basis of the number of clicks. This method fixes a price for advertisement on the basis of 1,000-time exposure, and is mainly adopted by Naver's Timechoice, Daum's Speciallink, and Nate's Speedup, etc, At present, the CPC method is most frequently adopted. The weak point of the CPC method is that advertising cost can rise through constant clicks from the same IP. If a company makes good use of strategies for maximizing the strong points of keyword advertising and complementing its weak points, it is highly likely to turn its visitors into prospective customers. Accordingly, an advertiser should make an analysis of customers' behavior and approach them in a variety of ways, trying hard to find out what they want. With this in mind, her or she has to put multiple keywords into use when running for ads. When he or she first runs an ad, he or she should first give priority to which keyword to select. The advertiser should consider how many individuals using a search engine will click the keyword in question and how much money he or she has to pay for the advertisement. As the popular keywords that the users of search engines are frequently using are expensive in terms of a unit cost per click, the advertisers without much money for advertising at the initial phrase should pay attention to detailed keywords suitable to their budget. Detailed keywords are also referred to as peripheral keywords or extension keywords, which can be called a combination of major keywords. Most keywords are in the form of texts. The biggest strong point of text-based advertising is that it looks like search results, causing little antipathy to it. But it fails to attract much attention because of the fact that most keyword advertising is in the form of texts. Image-embedded advertising is easy to notice due to images, but it is exposed on the lower part of a web page and regarded as an advertisement, which leads to a low click through rate. However, its strong point is that its prices are lower than those of text-based advertising. If a company owns a logo or a product that is easy enough for people to recognize, the company is well advised to make good use of image-embedded advertising so as to attract Internet users' attention. Advertisers should make an analysis of their logos and examine customers' responses based on the events of sites in question and the composition of products as a vehicle for monitoring their behavior in detail. Besides, keyword advertising allows them to analyze the advertising effects of exposed keywords through the analysis of logos. The logo analysis refers to a close analysis of the current situation of a site by making an analysis of information about visitors on the basis of the analysis of the number of visitors and page view, and that of cookie values. It is in the log files generated through each Web server that a user's IP, used pages, the time when he or she uses it, and cookie values are stored. The log files contain a huge amount of data. As it is almost impossible to make a direct analysis of these log files, one is supposed to make an analysis of them by using solutions for a log analysis. The generic information that can be extracted from tools for each logo analysis includes the number of viewing the total pages, the number of average page view per day, the number of basic page view, the number of page view per visit, the total number of hits, the number of average hits per day, the number of hits per visit, the number of visits, the number of average visits per day, the net number of visitors, average visitors per day, one-time visitors, visitors who have come more than twice, and average using hours, etc. These sites are deemed to be useful for utilizing data for the analysis of the situation and current status of rival companies as well as benchmarking. As keyword advertising exposes advertisements exclusively on search-result pages, competition among advertisers attempting to preoccupy popular keywords is very fierce. Some portal sites keep on giving priority to the existing advertisers, whereas others provide chances to purchase keywords in question to all the advertisers after the advertising contract is over. If an advertiser tries to rely on keywords sensitive to seasons and timeliness in case of sites providing priority to the established advertisers, he or she may as well make a purchase of a vacant place for advertising lest he or she should miss appropriate timing for advertising. However, Naver doesn't provide priority to the existing advertisers as far as all the keyword advertisements are concerned. In this case, one can preoccupy keywords if he or she enters into a contract after confirming the contract period for advertising. This study is designed to take a look at marketing for keyword advertising and to present effective strategies for keyword advertising marketing. At present, the Korean CPC advertising market is virtually monopolized by Overture. Its strong points are that Overture is based on the CPC charging model and that advertisements are registered on the top of the most representative portal sites in Korea. These advantages serve as the most appropriate medium for small and medium enterprises to use. However, the CPC method of Overture has its weak points, too. That is, the CPC method is not the only perfect advertising model among the search advertisements in the on-line market. So it is absolutely necessary that small and medium enterprises including independent shopping malls should complement the weaknesses of the CPC method and make good use of strategies for maximizing its strengths so as to increase their sales and to create a point of contact with customers.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.65-96
• /
• 2012

루머는 신뢰할 만한 타당한 근거나 이유가 없음에도 불구하고 광범위하게 이야기되는 일상적인 대화나 의견으로서 오랜기간 소비자 개개인의 사적 영역의 문제였다. 그러나 대중의 사랑과 주목을 받는 기업이나 브랜드는 선천적으로 소비자의 관심으로부터 멀어질 수 없으며, 항상 루머의 주요한 소재가 되어 왔다. 그 결과 현대의 소비자 커뮤니케이션 환경에서 루머는 기업 경영활동에 중요한 위기 요인이 되고 있다. 기업과 브랜드들이 당면하는 소비자 루머들은 크게 기업과 관련된 음모성 루머와 상품과 직접적 관련이 있는 오염성 루머로 나누어지며 국내외에서 많은 위기 사례들이 발견되고 있다. 심지어 P&G, SK, 현대, 삼성처럼 잘 정비된 홍보 조직을 갖춘 굴지의 대기업들조차 이런 루머로부터 자유롭지 못하며, 기존의 대응방식 역시 적절하지 못했던 것이 사실이다. 부정적 루머가 주목받아야 하는 이유는 해당 기업의 매출 및 점유율 하락은 물론 주식 가격에도 부정적인 영향을 미치며 오랜기간 구축해온 소비자와의 관계마저 황폐화시킬 가능성이 있기 때문이다. 최근 인터넷, 소셜 네트워크 서비스의 확산과 더불어 브랜드와 관련된 루머의 중요성은 더욱 증대하고 있으나 루머 연구는 지금까지 기업이나 마케팅 연구자의 정당한 주목을 받지 못하였다. 이에 본 연구는 루머의 다각적인 측면을 고려하는 상황주의자적 연구 패러다임을 기반으로 지각된 유용성, 원천 신뢰성, 메시지 신뢰성, 걱정, 생동감과 같은 루머와 관련된 속성들이 루머 수용강도와 루머 구전의도에 미치는 영향을 분석하였다. 이를 위하여 가상 브랜드와 루머가 제시되었으며, 실증조사를 통한 데이터 수집과 분석이 이루어졌다. 연구 결과에 따르면 원천 신뢰성, 메시지 신뢰성, 걱정, 생동감 같은 루머 특성 변수들은 루머 수용 강도에 유의한 영향을 미치고, 루머 수용강도는 루머 구전의도에 유의한 영향을 미치는 것으로 나타났다. 반면에 지각된 중요성은 루머 수용강도에 유의한 영향을 미치지 못하며, 상품 관여도의 조절효과 역시 유의하지 않은 것으로 나타났다. 본 연구는 주요한 실무적, 학문적 시사점을 제공하고 있다. 첫째, 루머를 자연발생적인 사회 현상이 아니라 소비자의 주요 활동의 일부이며, 마케터의 관심과 대응 커뮤니케이션 전략이 필요한 브랜드 관련 현상임을 주장하였다. 둘째, 브랜드 루머의 심리적, 사회적인 다차원적 구성 요인과 확산되는 경로를 제시함으로서 루머에 대한 능동적인 관리 가능성을 제시하였다. 셋째, 온라인상의 루머 활동이 기업 성과에 미치는 영향을 제시함으로서 기업들의 적극적인 온라인 커뮤니케이션 활동과 평판 관리의 필요성을 주장하였다. 넷째, 소비자의 걱정과 같은 부정적 정서가 루머의 온상이 되고 있음을 규명함으로서 소비자의 의혹을 불식시키기 위하여 정확하고 진실된 정보를 제공해야 함을 주장하였다. 다섯째, 루머의 유용성이 확산에 미치는 영향 가설이 기각되었으며, 상품 관여도의 조절 효과 역시 기각되었다. 이는 루머를 접하는 소비자의 입장에서 볼 때, 루머 자체가 무의미하더라도 단순한 재미나 호기심만으로도 얼마든지 확산될 가능성을 암시하고 있다. 일부 기업들은 사실이 아니라는 이유만으로 루머를 무시하거나 간과하는 경우들이 있으나, 기업의 예상과 다르게 루머가 얼마든지 확산될 수 있는 가능성을 보여주며, 기업의 보다 세심한 대응 전략의 필요성을 요구하고 있다.