• The Korean Journal of Rehabilitation Nursing
• /
• v.3 no.2
• /
• pp.228-242
• /
• 2000

Meridian massage is originated from oriental medical manipulation, and it has been mainly applied to as pain and paralysis. The purpose was to develop new method of nursing care for help hemiplegic patients to recover their functions of upper limbs and to reduce depressions. This study was carried out between 8, March, and 8, June, 2000 and the subjects of the study were .60 hemiplegic stroke patients who were participants at a hospitalized in K oriental medical center. The experimental group(30) and the control group(30) were assigned by means of participation order. The experimental group took meridian massage on affected upper limb for 10 minutes daily for 2 weeks. We evaluated muscle power and endurance with band from AVIVA corp.; range of motion with goniometer; shoulder pain with visual analogue scale; swelling with Jeweiers ring measurement of Dirette; depression with self-rating depression scale translated into Korean by Yang(1982). Data were analyzed by SPSS PC and the results are described below. The experimental group showed better muscle power and endurance than control group. Range of motiont of affected shoulder improved significantly in experimental group. Also, the experimental group showed less shoulder pain, hand edema, depression than control group. In this study, we observed that meridian massage is an effective nursing care in improving the function of upper limb and managing depression of stroke patients.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.505-511
• /
• 2008

The global navigation satellite system (GNSS) is using a direct sequence/spread spectrum (DS/SS) modulation. In order to recover the information data, the DS/SS system first performs a two-step synchronization process: acquisition and tracking. The acquisition process adjusts the phase difference between the received and locally generated acquisition sequences within ${\pm}T_c/2$ or less, where $T_c$ is the chip period. The tracking process performs fine synchronization. In this paper, we focus on the tracking issue. The single delta delay locked loop($\Delta$-DLL) is the optimal tracking scheme for a GNSS in the absence of multipath signals, where $\Delta$ means the spacing between the early and late correlation time offset. In the multipath environments, however, the $\Delta$-DLL suffers from huge estimation bias(denoted by $\beta$) caused by distorted correlation values. Although some modified schemes such as a $\Delta$-DLL with a narrow $\Delta$ and a double delta DLL (${\Delta}^{(2)}$-DLL) were proposed to reduce the estimation bias, they cannot remove the estimation bias completely and need more accurate acquisition process. This paper proposes a novel tracking scheme that can dramatically reduce the estimation bias, using the maximum slope change among the correlation outputs.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.143-153
• /
• 2009

Using a discrete wavenumber method, we examine the effects on Logging-While-Drilling (LWD) logs when a mismatch exists between the amplitudes or generating times of the signals from individual monopoles in a LWD multipole source. An amplitude-mismatched LWD dipole/quadrupole source produces non-dipole/non-quadrupole modes as well as flexural and screw modes. The strongest of non-dipole/non-quadrupole modes is the Stoneley mode, whose amplitude increases with increasing mismatch. However, we can recover the flexural mode signals by A-C processing, and the screw mode by A-B+C-D processing, respectively. The Stoneley mode, which has the same amplitude at the same radial distance from the borehole axis, is cancelled out by A-C and A-B+C-D processing as long as the tool is placed at the centre of the borehole. The responses from a time-mismatched LWD multipole source look like the summation of responses by two or four monopole sources off the borehole axis. However, we can avoid the misinterpretation of the formation velocities by referring to the computed dispersion curves, which are independent of the arrival times of the modes, on the frequency semblance plot.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.5
• /
• pp.516-523
• /
• 2005

This study was performed to investigate dietary behaviors and consumption of health food in cancer patients. The subjects were 163 cancer patients recruited from the general hospital in Seoul, Korea. The data were obtained by the structured self administered questionnaire. The mean age of subjects was 51 years. Most of subjects didn't eat the visual fat of meat and chicken skin. The mealtime of the subjects was generally regular and most of subjects had breakfast. The subjects of this survey liked to eat foods with sweet taste but disliked to eat hot, salty and sour taste ones. The preference for fish, marine products and vegetables was high but that for instant foods and frying foods was very low. Most of subjects consumed the foods that is generally known as anticancer foods such as vegetables and fruits. On the other hand, most of subjects didn't intake butter, margarine, and frying foods that is known as risk factors of cancer. The majority of subjects$(84.7\%)$ consumed the health food The main reasons for taking health foods by subjects were to cure disease$(58.0\%)$, to prevent disease$(45.3\%)$, to supply nutrients$(39.3\%)$, to maintain the mental state$(12.7\%)$ and to recover fatigue$(10.7\%)$. Majority of subjects$(66.0\%)$ spent money more than 200,000 won/month to buy health foods. The purchasing channels of health foods by subjects were recommendation by family or friend$(64.0\%)$, by physician/pharmacist$(18.0\%)$ and by nutritionist or dietician(6.0), and advertisement through TV or radio$(12.0\%)$. The types of taking health foods of the subjects were vegetable extracted food$(60.0\%)$, mushrooms$(51.3\%)$, Lactobacillus food$(25.3\%)$, enzyme food$(22.6\%)$ calcium containing food$(20.0\%)$ and so on. The results of the current study show that although many cancer patients already practice healthy dietary behaviors, there is a substantial proportion who do not and most of cancer patients consume health foods.' Further intervention is needed to explore the effect of health foods in cancer patients

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.50-60
• /
• 2008

The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.7-17
• /
• 2014

Molten salt electrorefining process achieves uranium deposits at cathode using an electrochemical processing of spent nuclear fuel. In order to recover pure uranium from cathode deposit containing about 30wt% salt, the adhered salt should be removed by cathode process (CP). The CP has been regarded as one of the bottle-neck of the pyroprocess as the large amount of uranium is treated in this step and the operation parameters are crucial to determine the final purity of the product. Currently, related research activities are mainly based on experiments consequently it is hard to observe processing variables such as temperature, pressure and salt gas behavior during the operation of the cathode process. Hence, in this study operation procedure of cathode process is numerically described by using appropriate mathematical model. The key parameters of this research are the amount of evaporation at the distillation part, diffusion coefficient of gas phase salt in cathode processor and phase change rate at condensation part. Each of these conditions were composed by Hertz-Langmuir equation, Chapman-Enskog theory, and interphase mass flow application in ANSYS-CFX. And physical properties of salt were taken from the data base in HSC Chemistry. In this study, calculation results on the salt gas behavior and optimal operating condition are discussed. The numerical analysis results could be used to closely understand the physical phenomenon during CP and for further scale up to commercial level.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.1
• /
• pp.40-49
• /
• 2017

In this study, we have made the annual total phosphorus (TP) mass balance diagrams for I wastewater treatment plant by utilizing the data of flow rate and TP of each process and tried to choose the optimum unit process empirically for phosphorus recovery. For the applicability evaluation, we have suggested several quantitative indices of flow rate, TP concentration, TP load and SS. Based on the analyses of TP mass balance, it became clear for reducing TP load of the wastewater treatment plant that it is efficient to recover phosphorus from the side stream in which the amount of flow rate is just 1/16, but TP concentration and load are 78 and 4.8 times larger than those of the influent of the plant. After the detailed applicability evaluation for the side stream, it could be concluded that the unit process of waste activated sludge thickener supernatant or dehydration filtrate are appropriate. Meanwhile, we did fundamental experiments utilizing the dewatering filtrate with TP concentration of 141.5 mg/L. After adjusting pH 10 and $Ca^{2+}$ concentration 250, 500, 1000 mg/L, it was stirred slowly. As a result, the $PO_4-P$ and TP removal efficiencies were above 95 percent; the results of the experiment imply the applicability of phosphorus recovery process in a wastewater treatment plant strongly.

• Korean Journal of Social Welfare
• /
• v.56 no.2
• /
• pp.167-194
• /
• 2004

This paper examine the gender-poverty gap and the feminization of poverty in Korea with using data from the National Survey Household Income & Expenditure(1996, 2000) and the Urban Survey Household Income & Expenditure(1996-2002) by Korea National Statistical Office. The poverty rate in 2000 was 16.9 percent for female-head families and 7.9 percent for male-head families, which means that female-head families were 2.6 times more likely to be poor than male-head families. With examining impact of economic crisis in 1998 on gender-poverty gap, it show that both the poverty rate of female-head and male-head increase radically in peak of economic crisis, while, in the stage of recovering economy, the poverty rate of male-head families recovered mostly the level before economic crisis, but that of female-head families recover only the 2/3 level before and the 1/3 remain still under poverty. Thus gender-poverty gap appeared bigger during passing through economic crisis. With analyzing on influence factors of poverty, it appear that poverty is influenced by gender itself as well as education level, working condition which is reflected substantially characteristics of gender. Such an analysis results mean that the considering gender dimension is necessary to resolve poverty fundamentally because gender is a point intersection among family, labour market, and social security. Therefore it appears certain that to develop and adopt of women-friendly social policy is effective approach, which could resolve poverty and social problems related to social rights.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.561-567
• /
• 2013

Mixed hardwood chips were pre-pulping extracted with green liquor prior to kraft pulping in order to recover hemicelluloses for use as biofuels. This green liquor solution containing mainly sodium sulfide and sodium carbonate was applied at different alkali charges (expressed as $Na_2O$) of 0, 1, 3, and 5% on dry wood weight. The extractions were performed at $160^{\circ}C$ for residence times ranging from about 1-2 h to determine the effect of extraction severity on composition of the pre-pulping extract. The severity of hemicellulose extraction time and green liquor charge controls the concentration of acetic acid and monosaccharide sugars available for downstream processing, the accumulation of degradation products such as organic acids and furans in the extract. As the alkali charge was increased, the amount of acetate side chains on the hemicelluloses and the dissolved lignin in the extract increased but the carbohydrate and sugars in the extract decreased appreciably. Hot water extraction (0% alkali addition) released the greatest amount of carbohydrates, up to 29.80 g/L measured as component sugars, but resulted in the greatest decrease in pulp yield. Meanwhile, pre-pulping extraction with 3% green liquor increased the pulp yield while greatly reducing the component sugars to 7.08 g/L. Fundamental data obtained in this study will allow selection of optimum hemicellulose extraction conditions for integrating the extraction operation into the Kraft pulping process.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.71-77
• /
• 2016

Solar energy is a viable source to replace fossil fuels. However, challenges associated with site selection for solar panel installation inhibit the uptake of solar energy systems. Expressway slopes offer a potentially attractive alternative for solar panel installation for the following reasons: expressway slopes are vacant public sites, they are abundant (about 4,193km in South Korea), and they are linear in nature. Traditoinally when selecting sites for solar systems conventional surveying methods are employed. Unfortunately, these methods can be dangerous, time consuming, and labor intensive. To overcome these limitations of conventional site selection methodologies, we propose an automated approach using numerical maps. First, contour and expressway polylines are extracted separately from numeric maps. The extracted contour lines are then converted into a digital terrain model; this is used to calculate aspect and slope information. Next, the extracted expressway lines are projected onto a binary image and refined to recover the disconnections, and then applied to create a buffer zone to narrow the search space. Finally, all data sets are overlaid to identify candidate sites for solar panel systems and are visually verified through comparisons with aerial photos.