• 동력기계공학회지
• /
• 제4권3호
• /
• pp.34-39
• /
• 2000

Performance data in the literature on air lift pumps have been based primarily on pumps of long length and large diameter (high lift pumps). Since mariculture operations involve pumps of relatively short length and small diameter, performance data are required for efficient operation. To provide such data, an experimental apparatus was designed and fabricated to test all lift pumps from 2.1 to 3.4 cm inside diameter and from 40 to 300 cm in length. Instrumentation was provided to measure water flow rate and air flow rate as well as water temperature, air temperature, and pressure throughout the system. Results from this study correlate well with high lift pump data in that, for a given pump geometry, maximum water flow occurs for a specific air flow rate. Driving the pump with air flows larger or smaller than this optimum flow rate will decrease the pumping rate. The optimum flows are significantly different for low lift pumps compared to high lift pumps. However, the pumping rate for low lift pumps approaches that for high lift pumps with increasing length.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.165-168
• /
• 2002

As the demand for higher data-rate chip-to-chip communication such as memory-to-controller, processor-to-processor increases, low cost high-speed serial links\ulcorner become more attractive. This paper describes a 0.25-fm CMOS 1.6Gbps/pin 4-level transceiver using Stub Series Terminated Logic for high Bandwidth. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by channel low pass effects, process-limited on-chip clock frequency, and serial link distance. The proposed transceiver uses multi-level signaling (4-level Pulse Amplitude Modulation) using push-pull type, double data rate and flash sampling. To reduce Process-Voltage-Temperature Variation and ISI including data dependency skew, the proposed high-speed calibration circuits with voltage swing controller, data linearity controller and slew rate controller maintains desirable output waveform and makes less sensitive output. In order to detect successfully the transmitted 1.6Gbps/pin 4-level data, the receiver is designed as simultaneous type with a kick - back noise-isolated reference voltage line structure and a 3-stage Gate-Isolated sense amplifier. The transceiver, which was fabricated using a 0.25 fm CMOS process, performs data rate of 1.6 ~ 2.0 Gbps/pin with a 400MHB internal clock, Stub Series Terminated Logic ever in 2.25 ~ 2.75V supply voltage. and occupied 500 * 6001m of area.

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.271-278
• /
• 2009

A new modulation scheme called multicoded-pulse position modulation (MC-PPM) is proposed for an ultrawideband (UWB) impulse radio communication system. The multicoded signal is generated by using several orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multicoded signal is converted to pulse position which results in not only an improved data rate, but also a processing gain in reception, delivering the power-efficient benefit of PPM and guaranteeing the low pulse energy for UWB systems. We notice that the modulation of multi-level values of the multicoded signal to pulse position is more efficient in terms of achievable data rate than the modulation of transmitting data based on other PPM schemes within given bandwidth and pulse energy. Therefore, as a performance measure, we focus on the achievable data rate (link capacity) of the proposed scheme and analyze it theoretically. Through simulation, we compare the link capacity of the MC-PPM scheme and other PPM schemes, such as M -ary PPM and multiple PPM. With the fixed bandwidth and same pulse energy condition, the UWB system based on the proposed MC-PPM scheme shows good link capacity and an increased data rate as L increases, which is contrary to other PPM schemes.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.195-205
• /
• 2020

최근 4차 산업혁명 시대로 인한 기술 발전이 도래하게 되었으며, 이러한 변화로 인해 데이터가 광범위하게 사용되기 시작했다. 빅데이터는 국가의 행정, 치안, 보안 등 시민의 안위를 위해서도 자주 사용되고 있다. 이러한 치안 유지의 효율성을 높이기 위해서는 CCTV의 설치 현황을 파악하고, 구역별 인구수와 비교하여 CCTV의 설치 비율, 그리고 구역별 범죄율 등을 분석하여 개선할 필요가 있다. 따라서 본 논문에서는 CCTV, 여성 인구, 유흥업소 등과 같이 범죄 발생률과 관련된 데이터를 수집하고, 이를 활용하여 CCTV의 효율적인 관리와 설치를 통해 범죄율을 줄이기 위한 공공 데이터 기반 빅데이터 분석 시스템을 개발한다.

• 대한임베디드공학회논문지
• /
• 제2권1호
• /
• pp.24-30
• /
• 2007

According to development of wireless communication technologies, we need not only high data rate but low data rate system of low power consumption. This low data rate system is utilized in the field of home automation, health care, sensoring and monitoring, etc. IEEE 802.15.4 LR-WPAN system is the best choice for realizing ubiquitous networking system. In this paper SoC Architecture for IEEE 802.15.4 Low Rate WPAN is designed. IEEE 802.15.4 Low Rate WPAN system serves the functions and realization of home area network. We propose the SoC architecture for 868/915MHz frequency band of IEEE 802.15.4 Low Rate WPAN system. The key issue is to design SoC architecture which provides the function of Low Rate WPAN system to meet the requirement of IEEE 802.15.4 standards.

• 한국압력기기공학회 논문집
• /
• 제8권2호
• /
• pp.42-47
• /
• 2012

The containment local leakage rate testing in nuclear power plants is performed in accordance with ANSI/ANS 56.8-1994 in Korea. Two methods, the make-up flow rate and the pressure decay, are used for local leakage rate testing. Though ANSI/ANS 56.8-1994 does not define clearly the minimum test duration for the make-up flow rate method, it requires obtaining the data after reaching the stable condition. Thus the prerequisite stable condition for data acquisition and the testing time is differently applied to each NPPs. Therefore, this study presents a standardized test procedure for data stabilization and testing time through experiments to improve the test reliability.

• International Journal of Reliability and Applications
• /
• 제1권2호
• /
• pp.133-143
• /
• 2000

Data from weighted distributions appear, among other situations, when some of the data are missing or are damaged, a case that is important in reliability and life testing. The kernel method for hazard rate estimation is discussed for these data where the basic large sample properties are given. As a by product, the basic properties of the kernel estimate of the distribution function for data from weighted distribution are presented.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.262-266
• /
• 2011

In high data-rate communication systems, encryption/decryption must be processed in high speed. In this paper, we implement CCM security mode which is the basis of security. Specifically, we combine CCM with AES block encryption algorithm in hardware. With the combination, we can carry out encryption/decryption as well as data transmission/reception simultaneously without reducing data-rate, and we keep low-power consumption with high speed by optimizing CCM block.

• Journal of the Korean Data and Information Science Society
• /
• 제15권2호
• /
• pp.379-386
• /
• 2004

This paper deals with a mixed logit model for vaccination data. The effect of a newly developed vaccine for a certain chicken disease can be evaluated by a noninfection rate after injecting chicken with the disease vaccine. But there are a lot of factors that might affect the noninfecton rate. Some of these are fixed and others are random. Random factors are sometimes coming from the sampling scheme for choosing experimental units. This paper suggests a mixed model when some fixed factors need to have different experimental sizes by an experimental design and illustrates how to estimate parameters in a suggested model.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권12호
• /
• pp.6163-6168
• /
• 2012

Although much health services research has been conducted using national health insurance claims data in Korea, the validity of this method has not been ascertained. The objective of this study was to validate the use of claims data for health services research by comparing incidence rate of cancers found using insurance claims data against rates of the national cancer registry of Korea. An algorithm to estimate incidence rates using claims data was developed and applied. The claims data from 2005-2008 were acquired and the patients admitted to hospitals due to cancer in 2008 without admission to hospital from 2005-2007 by the same diagnosis code were regarded as incident cases. The acquired results were compared with the values from the National Cancer Registry of Korea. The incidence rate of all cancers found using claims data was 363.1 per 100,000 people, which is very similar to the 361.9 per 100,000 rate of the national cancer registry. Also the age-, gender- and disease-specific rates between the two data sources were similar. Therefore, national health insurance claims data may be a worthwhile resource for health services research if appropriate algorithms are applied, especially considering the cost effectiveness of this method.