• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.179-184
• /
• 2012

A conventional wireless rf communication has relatively high ratio of power dissipation to transmit power for short-range links, susceptibility to interference, interception and jamming of electromagnetic wave. The study on alternative using ultraviolet signal to remedy the shortcomings of conventional rf communication has recently received attention. In this paper, the simulation results about the data rate performance of ultraviolet non-line-of-sight communication are provided. It is found that the direction of transmitting beam, receiving field of view width and the transmitting signal power have a seriously effect on the data rate of on-off-keying non-line-of-sight ultraviolet communication.

• The Journal of Korean Medicine
• /
• v.28 no.2 s.70
• /
• pp.22-33
• /
• 2007

Uterine myoma is a benign tumor of smooth muscle in the uterine wall. Recently, in Oriental medicine, concerns about uterine myoma patients have increased. We analyzed the medical records for 944 patients, including 257 uterine myoma patients, who visited Dongeui University Oriental Medical Center from May 2001 to June 2006. We investigated the DSOM (Diagnosis System of Oriental Medicine) symptom scores which effect uterine myoma patients using stepwise logistic regression model. Logistic regression analysis indicated as follows: In the control group composed of 558 outpatients, 18 items of DSOM were associated with myoma, 9 positively and 9 negatively, and the results showed that the correct rate was equal to 81.1%, sensitivity 72.8%, and specificity 84.9%. In 129 clinical trials data, 33 items of DSOM were associated with myoma, 18 positively and 15 negatively, and the results showed that the correct rate was equal to 85.8%, sensitivity 84.8%, and specificity 87.6%. In 687 outpatient and clinical trials data, 18 items of DSOM were associated with myoma, 10 positively and 8 negatively, and the results showed that the correct rate was equal to 82.8%, sensitivity 70.8%, and specificity 87.3%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1755-1763
• /
• 1998

The rain attenuatio of a radio channel above 10 GHz can have impact on the availability of the radio channel. The severity of the rain impairments increases with frequency and varies with regional location. This paper presents an estimation method for rain attenuation for millimeter-wave propagation in domestic environments. the dropsize distribution is assumed to be exponential, and the measurement data in the various countries which are simlar to the domestic environments are compared with the theoretical one by varying the dropsize distribution. A rain-rate conversion model which can convert .tau.-minutes rain-rate data to 1-minute rain-rate data for domestic environments is also discussed. Using the converted domestic rain-rate data, probabilty distributions of rain attenuation are computed.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.1-8
• /
• 2015

Wear leveling techniques have been studied to prolong the lifetime of NAND flash memory. Most of studies have used Program/Erase(P/E) cycles as wear index for wear leveling. Unfortunately, P/E cycles could not predict the real lifetime of NAND flash blocks. Therefore, these algorithms have the limited performance from prolonging the lifetime when applied to the SSD. In order to apply the real lifetime, wear leveling algorithms, which use raw Bit Error Rate(rBER) as wear index, have been studied in recent years. In this paper, we propose CrEWL(Cold data identification using raw Bit error rate in Wear Leveling), which uses rBER as wear index to apply to the real lifetime. The proposed wear leveling reduces an overhead of garbage collections by using HBSQ(Hot Block Sequence Queue) which identifies hot data. In order to reduce overhead of wear leveling, CrEWL does not perform wear leveling until rBER of the some blocks reaches a threshold value. We evaluate CrEWL in comparison with the previous studies under the traces having the different Hot/Cold rate, and the experimental results show that our wear leveling technique can reduce the overhead up to 41% and prolong the lifetime up to 72% compared with previous wear leveling techniques.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.600-610
• /
• 2001

The effects of group delay and non-linear characteristics on high data rate(HDR) satellite channel are presented in this paper Based on the modeling of group delay and non-linear characteristics the system performances which provide various data rate services were analyzed in Ka-band satellite channel. As the transmission data rate is increased, the degradation due to these channel characteristics is severely increased. The linear component of group delay and the AM-AM component of non-linear characteristics severely affect the system performance. To efficiently provide the various service via the same transmission system it is necessary to equalize the primary impairment factors. The optimum operating points of HDR satellite transmission system are implemented by considering the analyzed results on channel characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3030-3034
• /
• 2015

It is important to consider powertrain cooling performance, when engine is applied to new vehicle. If the performance is poor, engine will be damaged by overheating. But, the development timing of engine is faster than timing of vehicle, it is difficult to test the cooling performance of new engine and vehicle. In this study the powertain cooling performance was estimated with some test and calculation data. First, the heat rejection test was conducted. From this test, the heat rejection data at required rpm and load was acquired. Second, coolant flow test was conducted. From this test coolant flow rate to radiator was measured. Then engine torque and rpm was calculated from vehicle load and speed. Vehicle load and speed was calculated from test mode. Then by comparing these data, the powertrain cooling performance was estimated.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.376-385
• /
• 2016

A hexagonally arrayed 37-pin wire-wrapped rod bundle has been chosen to provide the experimental data of the pressure loss and flow rate in subchannels for validating subchannel analysis codes for the sodium-cooled fast reactor core thermal/hydraulic design. The iso-kinetic sampling method has been adopted to measure the flow rate at subchannels, and newly designed sampling probes which preserve the flow area of subchannels have been devised. Experimental tests have been performed at 20-115% of the nominal flow rate and $60^{\circ}C$ (equivalent to Re ~ 37,100) at the inlet of the test rig. The pressure loss data in three measured subchannels were almost identical regardless of the subchannel locations. The flow rate at each type of subchannel was identified and the flow split factors were evaluated from the measured data. The predicted correlations and the computational fluid dynamics results agreed reasonably with the experimental data.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1038-1045
• /
• 2019

This paper describes high-speed duobinary transceiver design techniques which are widely used to increase data-rate despite limited channel bandwidth. At high data-rate, signal level is severely degraded as signal frequency becomes larger than the channel bandwidth. Mathematically, a duobinary signal has lower frequency components compared to a Non-Return-to-Zero signal for the same data-rate. Therefore, by using the duobinary signaling, the signal loss can be effectively reduced in physical channel environment as compared to the Non-Return-to-Zero signaling. The mathematical basis of duobinary signaling, and its applications to high-speed transceiver design are investigated in this paper.

• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.51-62
• /
• 2021

On-chip caches of graphics processing units (GPUs) have contributed to improved GPU performance by reducing long memory access latency. However, cache efficiency remains low despite the facts that recent GPUs have considerably mitigated the bottleneck problem of L1 data cache. Although the cache miss rate is a reasonable metric for cache efficiency, it is not necessarily proportional to GPU performance. In this study, we introduce a second key determinant to overcome the problem of predicting the performance gains from L1 data cache based on the assumption that miss rate only is not accurate. The proposed technique estimates the benefits of the cache by measuring the balance between cache efficiency and throughput. The throughput of the cache is predicted based on the warp occupancy information in the warp pool. Then, the warp occupancy is used for a second bypass phase when workloads show an ambiguous miss rate. In our proposed architecture, the L1 data cache is turned off for a long period when the warp occupancy is not high. Our two-level bypassing technique can be applied to recent GPU models and improves the performance by 6% on average compared to the architecture without bypassing. Moreover, it outperforms the conventional bottleneck-based bypassing techniques.

• International Journal of Computer Science & Network Security
• /
• v.21 no.7
• /
• pp.305-316
• /
• 2021

The objective is to recognize the better opportunities from targeted reveal advertising, to show a banner ad to the consumer of online who is most expected to obtain a preferred action like signing up for a newsletter or buying a product. Discovering the most excellent commercial impression, it means the chance to exhibit an advertisement to a consumer needs the capability to calculate the probability that the consumer who perceives the advertisement on the users browser will acquire an accomplishment, that is the consumer will convert. On the other hand, conversion possibility assessment is a demanding process since there is tremendous data growth across different information dimensions and the adaptation event occurs infrequently. Retailers and manufacturers extensively employ the retail services from internet as part of a multichannel distribution and promotion strategy. The rate at which web site visitors transfer to consumers is low for online retail, out coming in high customer acquisition expenses. Approximately 96 percent of web site users concluded exclusive of no shopper purchase[1].This category of conversion rate is collected from the advertising of social media sites and pages that dataset must be estimating and assessing with the concept of big data clustering, which is used to group the particular age group of people along with their behavior. This makes to identify the proper consumer of the production which leads to improve the profitability of the concern.