• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.2
• /
• pp.27-33
• /
• 2020

Backward compatibility is one of the key issues for radio equipment supporting IEEE 802.11, the typical wireless local area networks (WLANs) communication protocol. For a successful packet decoding with the backward compatibility, the frame format detection is a core precondition. This paper presents a novel frame format detection method based on a deep learning procedure for WLANs affiliated with IEEE 802.11. Considering that the detection performance of conventional methods is degraded mainly due to the poor performances in the symbol synchronization and/or channel estimation in low signal-to-noise-ratio environments, we propose a novel detection method based on convolutional neural network (CNN) that replaces the entire conventional detection procedures. The proposed deep learning network provides a robust detection directly from the receive data. Through extensive computer simulations performed in the multipath fading channel environments (modeled by Project IEEE 802.11 Task Group ac), the proposed method exhibits superb improvement in the frame format detection compared to the conventional method.

• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.745-752
• /
• 2002

The purpose of the paper is to enable a format transcoding between a heterogeneous compression format in a real time, and to enhance the compression ratio using characteristics of the compressed frame. In this paper, for the heterogeneous format transcoding, we tried to transcode from MPEG2 having a lower compression ratio to H.263 having a higher compression ratio. After analyzing MPEG 2 bit stream and H.263 bit stream of the same original video, we found that the number of intra coded macro blocks in MPEG 2 data is much higher than the number of the intra coded macro blocks in H.263 data. In the process of P frame generation, a intra coded macro block is generated when a motion estimation value representing the similarity between the previous frame and current frame does not meet a threshold. Especially the intra coded macro block has a great impact on the compression ratio. Hence the paper, we tried to minimize the number of intra coded macro blocks in H.263 data stream which is transcoded from MPEG 2 in a compressed domain. For the purpose, we propose a guided search method for transcoding the INTRA coded block into INTER coded block using the information about motion vectors surrounding the intra macro block in order to minimize the complexity of the motion estimation process. The experimental results show that the transcoding of MPEG 2 into H.263 can be done in a real time successfully.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.189-194
• /
• 2016

Recently, there is increasing demand for image processing technology while activated the use of equipments such as camera, camcorder and CCTV. In particular, research and development related to 3D image technology using the depth camera such as Kinect sensor has been more activated. Kinect sensor is a high-performance camera that can acquire a 3D human skeleton structure via a RGB, skeleton and depth image in real-time frame-by-frame. In this paper, we develop a system. This system captures the motion of a 3D human skeleton structure using the Kinect sensor. And this system can be stored by selecting the motion file format as trc and bvh that is used for general purposes. The system also has a function that converts TRC motion captured format file into BVH format. Finally, this paper confirms visually through the motion capture data viewer that motion data captured using the Kinect sensor is captured correctly.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.712-718
• /
• 2005

In this study, a translator for transferring structural analysis data among commercial structural analysis programs was developed. The translator adopted the neutral format type based on ISO standard STEP AP 209 not only for the international standardization and robustness but also for the efficient management of structural analysis data Additional load entity is developed and added to AP 209 for the prevention of loss of information in retrieving exact loading condition. A modulization which is needed for efficient management and extension of the translator was made for the encapsulation of file format of each commercial code. Pilot tests peformed with 3-D frame analysis data of Sung-su bridge show that the developed translator guarantees the integrated management of analysis information as well as the exact transferring and retrieving of analysis data and related information.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.375-384
• /
• 2016

In this paper, when stereo image, satellite view and corresponding depth maps were used as the input data, we propose a new method that convert these data to data format suitable for compressing, and then by using these format, intermediate view is synthesized. In the transmitter depth maps are merged to a global depth map and satellite view are converted to residual image corresponding hole region as out of frame area and occlusion region. And these images subsampled to reduce a mount of data and stereo image of main view are encoded by HEVC codec and transmitted. In the receiver intermediate views between stereo image and between stereo image and bit-rate are synthesized using decoded global depth map, residual images and stereo image. Through experiments, we confirm good quality of intermediate views synthesized by proposed format subjectively and objectively in comparison to intermediate views synthesized by MVD format versus total bit-rate.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.801-803
• /
• 2003

In this paper, we present a method for generating and providing spatially encoded video data that can be effectively used by GIS applications. We collect the video data by a mobile mapping system called 4S-Van that is equipped by GPS, INS, CCD camera, and DVR system. The information about spatial object appearing in video, such as occupied region in each frame, attribute value, and geo-coordinate, are generated and encoded. We suggest methods that can generate such data for each frame in semi-automatic manner. We adopt standard MPEG-7 metadata format for representation of the spatially encoded video data to be generally used by GIS application. The spatial and attribute information encoded to each video frame can make visual browsing between map and video possible. The generated video data can be provided and applied to various GIS applications where location and visual data are both important.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.3165-3181
• /
• 2019

Spherical videos, which are also called 360-degree videos, have become increasingly popular due to the rapid development of virtual reality technology. However, the large amount of data in such videos is a huge challenge for existing transmission system. To use the existing encode framework, it should be converted into a 2D image plane by using a specific projection format, e.g. the equi-rectangular projection (ERP) format. The existing high-efficiency video coding standard (HEVC) can effectively compress video content, but its enormous computational complexity makes the time spent on compressing high-frame-rate and high-resolution 360-degree videos disproportionate to the benefits of compression. Focusing on the ERP format characteristics of 360-degree videos, this work develops a fast decision algorithm for predicting the coding unit depth interval and adaptive mode decision for intra prediction mode. The algorithm makes full use of the video characteristics of the ERP format by dealing with pole and equatorial areas separately. It sets different reference blocks and determination conditions according to the degree of stretching, which can reduce the coding time while ensuring the quality. Compared with the original reference software HM-16.16, the proposed algorithm can reduce time consumption by 39.3% in the all-intra configuration, and the BD-rate increases by only 0.84%.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.123-132
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from pasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64). Transference of data between AutoCAD and I-DEAS Master Series Drafting is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of five modules, which are input and shape treatment, production feasibility check, strip-layout, data-conversion and die-layout modules. The process planning and Die design system is designed by considering several factors, such as complexities of blank geometry, punch profiles, and the availability of a press equipment and standard parts. This system provides its efficiecy for strip-layout, and die design for lead frame, semiconductor.