• 천문학회보
• /
• 제46권1호
• /
• pp.32.1-32.1
• /
• 2021

We present the magnetic field strengths of CTA 102 using multi-frequency data at 2.6-343.5 GHz in order to study the physical origins of radio flares. The observations at 22 and 43 GHz were conducted using the single-dish radio telescopes of the Korean VLBI Network (KVN) from December 2012 until May 2018 (MJD 56200-58400). We used multi-frequency data obtained from the Effelsberg 100-m, OVRO 40-m, Metsähovi 14-m, IRAM 30-m, SMA, ALMA, and VLBA telescopes. During the period of the observations, two major flares (R1 and R2) are seen clearly at 15 and 37 GHz during MJD 57500-57800 and MJD 58000-58300, respectively. The source shows typical variability with time-scales ranging from 20-161 days at 15 GHz. The variability Doppler factor is in the range of 11.51-31.23. The quasi-simultaneous radio data are used to investigate the synchrotron spectrum of the source, finding that the synchrotron radiation is self-absorbed. The turnover frequency and the peak flux density of the synchrotron self-absorption (SSA) spectra are in ranges of 38.06-167.86 GHz and 1.49-10.38 Jy, respectively. From the SSA spectra, magnetic field strengths are estimated to be < 10 mG. The equipartition magnetic field strengths are larger than the SSA magnetic field strengths by a factor of > 100. This indicates that the radio flares may be related to a particle energy-dominated emission region.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.1-5
• /
• 2008

Super-resolution near-field structure (super-RENS) technology and solid immersion lens (SIL) based near-field (NF) technology have been expected as promising approaches to increase data capacity or areal density of optical disc. Super-RENS technology has been studied until now using mainly numerical aperture (NA) of 0.85 far-field optical system and possibility of tangential data density increment have been presented. NF technology has been studied with NA over 1 and presented demonstration of removable performance. To achieve much higher density, approach to increase NA of super-RENS by NF technology (Near-Field Super-Resolution, NFSR) can be a candidate and we think this technology would be advantageous compared to wavelength reduction or much higher NA increment of NF technology or much smaller effective optical spot size reduction of far-field super-resolution technology. In this paper we present readout result of ROM media having monotone pits using NF optical system with wavelength of 405nm and NA of 1.84 surface type SIL. GeSbTe material was used for super resolution active layer and pit length is 37.5nm which is shorter than resolution limit 55nm. We present the feasibility of NFSR technology by confirming the CNR threshold according to readout power (Pr) and CNR 33dB over threshold Pr.

• 품질경영학회지
• /
• 제45권2호
• /
• pp.227-246
• /
• 2017

Purpose: This study proposes a Shiny-Sigma Methods that combines the advantages of Six Sigma method and Shainin method in order to solve field defect. Each technique has advantages and disadvantages. Methods: This study proposed Shiny-Sigma by combining Six Sigma has the logical advantage of the problem solving road map and Shiny has the merits of finding the root problem from the defective phenomenon. The Six Sigma method has the disadvantage that it is difficult to solve if the number of data is small, but the Shiny method has the advantage of finding the root cause with a small number of data. Results: As a result of applying Shiny-Sigma method to the field, it has advantages of solving the problem easily and quickly than the existing Six Sigma method. It does not require a lot of statistical knowledge, which helps field workers to use it. Based on these successes L Co. company has obtained the effect of improving the production quality by applying the Shiny-Sigma method. Conclusion: The Shiny-Sigma method proved to be suitable for the production site as a result of field application. It is suitable for field workers with low statistical knowledge and is suitable for field where data is difficult to obtain. This method is not a method to solve all the problems because there are problems that can be solved according to the field problems. We hope that this method will spread to many industrial sites and this method will have a great effect on the improvement of field production quality.

• 대한방사선치료학회지
• /
• 제11권1호
• /
• pp.6-10
• /
• 1999

The field size can be beam output, therefore MonitorUnit can be varied due to field size dependence The purpose of this study is to evaluate and compare the dose variation according to exchange of collimator The measurements were perfomed with Wellhofer dosimetry system(water phantom. ion chamber. electrometer. system controller. build up cap. etc)and two types of linear accerlerator (Mevatron KD, MevatronMX) Scatter can be affected to field size dependence and scatter correction is separated into collimator and phantom components, scatter components can affect by exchanging of collimator Measurements of collimator scatter factor(Sc) was done in air with build up cap. 1)Square field (5cm2 to 40cm2) was measured 2)and then keeping the upper jaw constant at loom and varing lower jaw from 5cm to 40cm, 3)keeping the lower jaw constant at 10cm and varing upper jaw from 5cm to 40cm Measurements of total scatter factor(Scp) was done in water at Dmax as the procedure of collimator scatter factor measurements in water Dmax The total scatter factors were obtained to the following equation(Sp=Scp/Sc) The measured data is normalized to the data of reference field size($10{\times}10$), rectangular field is inverted to equivalent field to compare three field size data As the collimator setting is varied, the output was changed In conclusion, the error was obtained small but it must be eliminated if we intend to reach the common stated goal of $5\%$ overall uncertainty in dose determination

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.329-336
• /
• 2012

Korea Astronomy and Space Science Institute researchers have installed and operated magnetometers at Bohyunsan Observatory to measure the Earth's magnetic field variations in South Korea. In 2007, we installed a fluxgate magnetometer (RFP-523C) to measure H, D, and Z components of the geomagnetic field. In addition, in 2009, we installed a Overhauser proton sensor to measure the absolute total magnetic field F and a three-axis magneto-impedance sensor for spectrum analysis. Currently three types of magnetometer data have been accumulated. In this paper, we use the H, D, Z components of fluxgate magnetometer data to investigate the characteristics of mid-latitude geomagnetic field variation. To remove the temporary changes in Earth's geomagnetic filed by space weather, we use the international quiet days' data only. In other words, we performed a superposed epoch analysis using five days per each month during 2008-2011. We find that daily variations of H, D, and Z shows similar tendency compared to previous results using all days. That is, H, D, Z all three components' quiet intervals terminate near the sunrise and shows maximum 2-3 hours after the culmination and the quiet interval start from near the sunset. Seasonal variations show similar dependences to the Sun. As it becomes hot season, the geomagnetic field variation's amplitude becomes large and the quiet interval becomes shortened. It is well-known that these variations are effects of Sq current system in the Earth's atmosphere. We confirm that the typical mid-latitude geomagnetic field variations due to the Sq current system by excluding all possible association with the space weather.

• 한국학교보건학회지
• /
• 제33권3호
• /
• pp.194-202
• /
• 2020

Purpose: The purpose of the study was to develop educational materials on field practice safety based on existing field practice data and accident cases regarding vocational high schools and apply them to identify their impact. Methods: The existing data, accumulated since 2010, on field practices of vocational high schools were analyzed, and educational materials regarding field practices were developed by six experts. 195 students in three vocational high schools were surveyed before and after being taught with the materials. The survey asked about their knowledge of industrial safety and health and attitudes toward industrial safety and health. Results: As a result of the study, harmful environments for field practices of vocational high schools were physical, chemical, ergonomic, and emotional labor, and the consequences were accidents, death by overwork, musculoskeletal diseases, etc. The materials covered students' rights and how to respond to workplace accidents in the 1st round, how to organize a workshop in the 2nd round, workplace safety and health signs in the 3rd round, prevention of musculoskeletal diseases in the 4th round, management of physical risk factors in 5th round, management of hazardous chemicals in 6th round, wearing and managing protective equipment in 7th round, first aid depending on the situation in the 8th round, CPR and defibrillator in the 9th round, sexual harassment in the 10th round, and prevention of sexual violence in the 11th round. After completing the education, their knowledge of industrial safety and health increased significantly from 6.52 points to 7.01 points. Conclusion: The results of this study suggest: first, to statistically organize the data on accidents that have occurred during field practices of vocational high schools; second, to develop a systematic curriculum for high school 1st to 3rd graders on accidents that may happen during field practices of vocational high schools.

• 한국지구과학회지
• /
• 제26권1호
• /
• pp.41-57
• /
• 2005

본 연구의 목적은 학생들로 하여금 실제 야외지질조사를 효과적으로 수행하기 위한 교육 자료를 개발하는 것이다. 이를 위하여 시대를 달리하는 다양한 암석과 지질구조를 가지고 있고 지리적으로 접근하기 편리한 음성분지의 남동부 두타산 일대를 대상으로 선정하였다. 음성분지의 야외지질 실습코스에는 13개의 관찰지점이 있으며 실제 현장에서 각 관찰 지점별로 학생들이 활동할 수 있도록 야외학습자료를 제시하였다. 이를 위해 일반 지형도나 수치 지형도를 이용하여 스스로 노선지질도를 작성하도록 하였으며 큰 구조나 서로 다른 암상과의 관계를 광역적으로 알 수 있도록 항공사진을 첨가하였다. 또한 각 관찰 지점마다 노두 및 편광 현미경 사진을 제시하여 야외학습에서 경험할 수 있는 환경으로 설계하여 실제로 야외에서 겪게 되는 갈등 요인을 최소화 할 수 있도록 하였다. 이렇게 구현된 야외지질조사자료는 충북대학교 사범대학 지구과학 수강자를 대상으로 학생들의 태도를 조사하였으며, 그 결과 정의적 측면에서 학생들이 야외학습을 수행하는데 도움이 된다는 긍정적인 변화를 보였으며, 특히 지구과학에 관한 구체적인 개념 형성에 많은 도움이 되는 것으로 분석되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.803-812
• /
• 2008

Along with the increasing demand for automatic and mechanical tunnel excavation methods in Korea, the Tunnel Boring Machine (TBM) method of tunnel excavation has become increasingly popular. However, in spite of this rising demand, few studies have been performed on the TBM method, in Korea. For this reason, this study focused on evaluation of the applicability of TBM performance prediction models based on field data in order to contribute to the basic and essential parts of TBM designation and the TBM method of tunnel excavation in Korea. These rock properties can be defined as the mechanical and physical factors of rock that have an influence on a disc cutter's ability to cut rock, and provide information for the evaluation of the applicability of field data. Based on outcomes from these tests, applicability of the prediction model was evaluated and the predicted performance of a TBM was compared with real field data obtained from four different TBM construction sites in Korea.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.678-681
• /
• 2003

In conventional optical data storage numerical aperture (NA) cannot be over 1 because of diffraction limit. To overcome this limitation. solid immersion lens(SIL) have produced a great interest in near-field optical data storage. In conventional optical recording method, the dual lens system using object lens and SIL had been studied generally. But the conventional SIL system has some critical problems that must be solved. The problems are heat, contamination. alignment of optical components and so on. To solve these problems. this work proposes enhanced SIL which has several advantages for mechanical and optical issues. This new SIL system named elliptic SIL(ESIL) can use evanescent energy in near-field more effectively. In addition. because of applying the inside recording unlike previous surface recording, ESIL can clear up the problems. The design and analysis of ESIL art executed by using CODE V. Also, in this paper we composed actual data recording system and achieved recording experiment by applying ESIL to magneto-optical recording. In conclusion. we analyze the improvement of aerial density and the reasonability of application to real data storage system.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.254-258
• /
• 2014

Field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. To correctly estimate ice load and ice resistance on ship's hull, It is essential to understand the material properties of sea ice during ice field trials and to perform the proper experimental procedure by gathering sea ice data. A measurement of sea ice properties was conducted during February and March of 2012 with the Korean Icebreaking research vessel "ARAON" in the Amundsen Sea, Antarctica. This paper describes a test procedure to obtain sea ice data which provide basic information to estimate ice loads and icebreaking performance of the ship. The data gathered from sea ice field trials during the 2012 Antarctic voyage of the ARAON includes ice temperature/salinity/density and the compressive/flexural strength of sea ice. This paper analyses the gathered Antarctic sea ice material properties comparing with the previous data obtained during ARAON's Arctic and Antarctic voyages in 2010.