• Analytical Science and Technology
• /
• v.36 no.3
• /
• pp.121-127
• /
• 2023

The detection of blood at a crime scene is an important process for identification and case reconstruction. However, blood may be difficult to observe with the naked eye on dark or multi-colored surfaces. Acidic hydrogen peroxide (AHP) is a recently reported blood enhancement reagent that can enhance blood with high sensitivity by increasing the exposure time of the camera. However, it has never been compared to previously known techniques on dark or multi-colored surfaces. For this purpose, the method of observation/photographing (UV and IR photography), alginate casting, leuco rhodamine 6G (LR6G), and AHP were applied to bloody impression on dark or multi-colored surfaces and the results were compared. As a result, blood treated with AHP had a higher contrast to the surfaces than UV and IR photography, and it was applicable on all surfaces, opposed to alginate casting. In addition, AHP successfully enhanced blood on dark or multi-colored surfaces, similar to LR6G.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.365-371
• /
• 2001

The effects of light exposure and light intensity on surface color of Hanwoo (Korean native cattle) beef and color stability of fresh normal and DFD (dark, firm, dry) muscles during 7 days at $4{\pm}1^{\circ}C$ under three display conditions (Dark, Light1000 and Light3000) were investigated. The $L^*$, $a^*$, $b^*$, $C^*$ values and R630-R580 were significantly (p<0.05) higher in normal beef than in DFD beef. The $a^*$, $b^*$, $c^*$ values and R630-R580 of normal beef increased during the first day of display except Light3000 group, then gradually decreased over time. The surfaces of Hanwoo beef accumulated more metmyoglobin in the light than in the dark. Also, the rate of decrease in redness during refrigerated storage was enhanced by light exposure and increase in light intensity. Discolorations were more rapid in DFD beef than normal beef. Increasing light intensity promoted not only discoloration but also lipid oxidation. Therefore storage in the dark is effective in retarding the formation of a brown color in Hanwoo beef.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.23-28
• /
• 1999

This study measured transpiration rate of urban trees and albedos of urban surfaces, and examined the function of microclimate amelioration by urban greenspace. Transpiration rates of trees were highest in July and August of growing months. Transpiration per unit leaf area for the two months was 300-350 g/$m^2$/h for Platanus occidentalis, 210-270 g/$m^2$/h for Ginkgo biloba and Zelkova serrata, and 130-140 g/$m^2$/h for Acer palmatum. Surface albedos were 0.09 for asphalt paving and 0.68 for white wall, which reveals that light-colored surfaces are better than dark-colored ones to lower the heat build-up. Due to lack of evapotranspiration, concrete surfaces were, at t midafternoon maximum, 8$^{\circ}C$ hotter than grass ones, though the albedo of concrete paving was higher thant that of grass and trees. Summer air temperatures at places with 12% and 22% cover of woody plants were, respectively, 0.6$^{\circ}C$ and 1.4$^{\circ}C$ cooler than a place with no vegetation. To mitigate the impacts of urban heat islands, required are minimization of hard surfaces, light-coloring for building surfaces, and greenspace enlargement including more plantings.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.72-80
• /
• 2016

There are various methods of developing latent fingerprints from evidence found at crime scenes. Crime scene investigators should choose appropriate techniques among them depending on the conditions of the evidences. In this study, we compared the three methods using forensic light sources to develop latent fingerprints on multi-colored surfaces. We selected the various samples according to color, shape and texture of the surfaces and developed the latent fingerprints using fluorescent powder, IR(Infrared) photography and Episcopic Co-axial Illumination. Fluorescent powder was highly effective on all surfaces. IR photography was also effective, but only on the not dark surfaces. Episcopic Co-axial Illumination was effective only on the flat and polished surfaces. Although fluorescent powder was fine regardless of the characteristics of the surfaces, IR photography was better on certain surfaces.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.819-826
• /
• 2015

This study measured temperatures and albedos of urban surfaces for different colors and materials during summer, and calculated the energy budget over different urban surfaces to find out the thermal performance affecting the heat built-up. The study selected six surface colors and 13 materials common in urban landscape. Their surface temperatures (Ts) and albedos were measured at a given time interval in the daytime from June to August. Average Ts over summer season for asphalt-colored brick was $4.0^{\circ}C$ higher than that for light red-colored one and $9.7^{\circ}C$ higher than that for white-colored one. The Ts for artificial surface materials of asphalt paving, brown brick wall, and green concrete wall was $6.0^{\circ}C$ higher than that for natural and semi-natural ones of grass, grassy block, and planted concrete wall. There was the greatest difference of $16.3^{\circ}C$ at midafternoon in the Ts between asphalt paving and planted concrete wall. Average albedo over summer season of surface materials ranged from 0.08 for asphalt paving to 0.67 for white concrete wall. This difference in the albedo was associated with a maximum of $15.7^{\circ}C$ difference at midafternoon in the Ts. Increasing the albedo by 0.1 (from 0.22 to 0.32) reduced the Ts by about $1.3^{\circ}C$. Average storage heat at midday by natural and semi-natural surfaces of grass and grassy block was about 10% lower than that by artificial ones of asphalt, light-red brick, and concrete. Reflected radiation, which ultimately contributes to heating the urban atmosphere, was 3.7 times greater for light-red brick and concrete surfaces than for asphalt surface. Thus, surfaces with in-between tone and color are more effective than dark- or white-colored ones, and natural or semi-natural surfaces are much greater than artificial ones in improving the urban thermal environment. This study provides new information on correlation between Ts and air temperature, relationship between albedo and Ts, and the energy budget.

• Journal of Photoscience
• /
• v.12 no.3
• /
• pp.171-174
• /
• 2005

The relationship between porous surfaces and photoluminescence (PL) behavior of porous silicon carbide (PSC) in various solvents has been studied. The porous surfaces of p-type silicon carbide can be fabricated by electrochemical anodization from the 6H, 15R, 4H-${\alpha}$-SiC substrates in dark-current mode (DCM) condition. We have been investigated the dependence of the PL spectra of PSC under the medium having the different dielectric constants. It has been found that PL depends sensitively on the environment surrounding the surface. The extent of chemically stability on the surface of PSC due to the various solvents was confirmed by reflectance Fourier transform infrared (FTIR) spectroscopy. Detailed IR experiments on the PSC samples were carried out before and after various solvents immersion. These results will be offered important information on the origin of PL in porous structure.

• Journal of the Korean Institute of Educational Facilities
• /
• v.3 no.1
• /
• pp.53-58
• /
• 1996

The purpose of this study was to obtain a new guideline on designing the visual environment in the classrooms of elementary schools. This study was carried out through the field measurements on the classrooms and a survey using the questionnaire about the visual environment for learning. The major findings of the study were as follows: (1) It was unbalanced among the illumination, luminance, and color distributions in the classrooms. (2) It was too bright or dark around the surrounding surfaces (walls, floors, and ceilings) of students in the classrooms. Therefore, it is needed to be careful attention on the light distribution and the reflection ratio around the surrounding surfaces of students in the classrooms.

• Journal of the Korean Society of Visualization
• /
• v.22 no.1
• /
• pp.28-33
• /
• 2024

We visualized the rupturing of liquid films flowing over a disk rotating with large angular velocity. A setup of high speed imaging for liquid flows on dark and reflective surfaces are suggested. From the result, rivulet structures are revealed to be strongly governed by three-dimensional surface structures developed in the film flow. Additionally, unique flow structures including the rivulet sliding and internal meandering are investigated. Generation mechanism of such structures are discussed in terms of the dynamic contact angle theory.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.194-201
• /
• 2013

In serious crimes, bloody fingerprints are crucial evidence that make links between suspects and victims. There have been many studies related to bloody fingerprints for a long time. There are many comparative studies for effectiveness of Acid Fuchsin and Acid Yellow 7, but nothing about Eosin-Y in this country. Acid Fuchsin is a useful reagent that has unique red color distinguishing from light colored background. but it is useless on dark surfaces. In order to make it visible, we should use BVDA Gel lifters. On the contrary this, Acid Yellow 7 makes stronger fluorescence on a dark background. In this study, we got the conclusion that Eosin-Y is more useful than the others not only on dark background but also light background.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.227-237
• /
• 2008

STATEMENT OF PROBLEM: Zirconium oxide can be a substitute to titanium as implant materials to solve the esthetic problems of dark color in the gingival portion of implant restorations. PURPOSE: This study was performed to define attachment and growth behavior of osteoblast- like cells cultured on grooved surfaces of zirconium oxide and evaluate the genetic effect of zirconium oxide surfaces using the reverse transcriptase-polymerase chain reaction (RT-PCR). MATERIAL AND METHODS: MC3T3-E1 cells were cultured on (1) commercially pure titanium discs with smooth surface (T group), (2) yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) with machined surface (ZS group), and (3) Y-TZP with $100{\mu}m$ grooves (ZG group). Cell proliferation activity was evaluated through MTT assay and cell morphology was examined by SEM. The mRNA expression of Runx2, alkaline phosphatase, osteocalcin, TGF-${\beta}1$, IGF-1, G3PDH in E1 cells were evaluated by RT-PCR. RESULTS: From the MTT assay, after 48 hours of adhesion of MC3T3-E1 cells, the mean optical density value of T group and ZG group significantly increased compared to the ZS group. SEM images of osteoblast-like cells showed that significantly more cells were observed to attach to the grooves and appeared to follow the direction of the grooves. After 24 hours of cell adhesion, more spreading and flattening of cells with active filopodia formation occurred. Results of RT-PCR suggest that T group, ZS group, and ZG group showed comparable osteoblast-specific gene expression after 24 hours of cell incubation. CONCLUSION: Surface topography and material of implants can play an important role in expression of osteoblast phenotype markers. Zirconia ceramic showed comparable biological responses of osteoblast-like cells with titanium during a short-time cell culture period. Also, grooves influence cell spreading and guide the cells to be aligned within surface grooves.