• 제목/요약/키워드: dark blue

검색결과 386건 처리시간 0.022초

P. aeruginosa EMS1의 mutagen 처리를 통한 고기능 유화재 균주의 개발

  • 이근희;이오미;김기한;차미선;손홍주;이상준
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.556-557
    • /
    • 2001
  • 생물 계면활성제의 개발을 위해 MNNG(N-Methyl-N-Nitro- NitrMoguanidjne), EMS, UV radiator 등 random mutation을 유도하여 가장 고기능 유화제 생산 균주를 선별하여 다양한 탄소원에 따른 생육도와 유화활성, 유화 활성에 미치는 pH 등 생물 계면활성제의 생산에 관한 조사를 한 결과 Bunker A에서는 유화활성이 원래 균주보다 최고 약 6배까지 증가했으며 표면장력 또한 40.3dyne/cm 에서 34.0dyne/cm 으로 크게 감소되었다.

  • PDF

Two Unrecorded Species of the Snapper (Perciformes: Lutjanidae) Collected from Jeju Island, Korea

  • Kim, Maeng Jin;Kim, Byung Yeob;Kim, Joon Sang;Song, Choon Bok
    • Fisheries and Aquatic Sciences
    • /
    • 제15권4호
    • /
    • pp.313-316
    • /
    • 2012
  • Two unrecorded species of the snapper, Lutjanus malabaricus (296.0 mm standard length [SL]) and L. stellatus (350.0 mm SL) belonging to the family Lutjanidae, were first collected from the western coastal waters of Jeju Island, Korea. L. malabaricus is characterized by having a dark marking on the upper half of the caudal peduncle, a band of vomerine teeth that does not protrude posteriorly at the middle, and nine anal soft rays. Compared to its Korean relative, L. malabaricus is distinguishable by having rows of scales that run obliquely in the dorsal-posterior direction above the lateral line (vs. parallel to the lateral line in L. argentimaculatus). L. stellatus can be identified by the absence of wavy blue lines on the head (vs. many blue lines in L. rivulatus) and presence of a white spot above the lateral line (vs. a black blotch on the lateral line in L. rivulatus). We propose new Korean names, "Jin-hong-tung-dom" and "Huin-jeom-tung-dom," for L. malabaricus and L. stellatus, respectively.

Geranium sibiricum L.의 성분에 대하여 (Study on components of Geranium sibiricum L.)

  • 유경수
    • 약학회지
    • /
    • 제3권1호
    • /
    • pp.23-25
    • /
    • 1957
  • The herb of Geranium sibirium L, a drug knwon as "Chui Sonni Poul" distributed widely, has been used as a folk-medicine for the treatment of diarrhea. The dried entire herb is boiled with methanol and methanol is distilled of from the filtered methanol extract under reduced pressure. Then the extract is boiled with water and filtered off. From the filtrate, the following substances are isolated and identified by treating with organic solvents as ether, ethyl acetate, and etc.: 1. Gallic acid: a colorless needle crystal which is soluble in alcohol and water. mp.235.deg. C, positive (dark blue) against the ferric chloride reagent. 0.76 percent of gallic acid is yielded from the herb. 2. Quercetin: a light yellow crystal. mp.194.deg. C. negative against the ferric chloride reagent. 3. Ellagic acid: a light yellow crystal which is insoluble in ehter and acetone and slightly soluble in alcohol. Positive (blue) against the ferric chloride reagent. The crystal obtained by recrystalisation from pyridine, does not melt by 360.deg. C. Represent a yield of 0.03 percent from the herb. 4. Crude tannin: a approximately 7.6 percent of crude tannin is yielded by treating with ethyl acetate. gallic acid and querceetin are yielded by hydrosis with dliute sulfuric acid. Based on the above results, the following suggestion could be recommendable; Geraed in the Japanese Pharmacoeia VI.acoeia VI.

  • PDF

생물검정에 의한 남조류 Microcystis가 수질에 미치는 영향 (The Impact on Water Quality from Blue-Green Algae Microcystis Natural Phytoplankton by Algal Assay)

  • 신재기;조경제
    • 한국환경과학회지
    • /
    • 제9권3호
    • /
    • pp.267-273
    • /
    • 2000
  • In order to understand the impact for decomposition of blue-green algae Microcystis on water quality, the algae were cultivated with collection of natural population during approximately one month, when water-bloom of Microcystis dominated at August 31, 1999 in the lower part of the Okchon Stream. The enrichment of inorganic NㆍP nutrients didn't in algal assay and the effect of Microcystis on water duality was assessed from the variation of nutrients by algal senescence. Microcystis population seemed to play a temporary role of sink for nutrients in the water body. Initial algal density of Microcystis was 2.3×10/sup 6/ cells/㎖. When Microcystis population died out under light condition, algal NㆍP nutrients between 9∼12 days affected to increase of biomass after reuse by other algal growth as soon as release to the ambient water. However, cellular nutrients under dark condition were almost moved into the water during algal cultivation. NH₄, NO₃ and SRP concentration were highly increased with 160, 17 and 79 folds, respectively relative to the early. As a result, the senescence of Microcystis population seemed to be an important biological factor in which cause more eutrophy and increase of explosive algal development by a lot of nutrients transfer to water body. There are significantly observed an effort of reduce for production of inner organic matters such a phytoplankton as well as load pollutants from watershed in side of the water quality management of reservoir.

  • PDF

성인 여성의 연령에 따른 복식색채 선호에 대한 연구 - Street Color Research를 중심으로 - (A Study on Color Preference of Women's Wear - by the Method Street Color Research -)

  • 조정미
    • 대한가정학회지
    • /
    • 제37권12호
    • /
    • pp.1-11
    • /
    • 1999
  • The purpose of this study is to investigate the color preference of women living in Seoul, to provide materials which is useful for setting up the color plan for a better costume, and to suggest new information in the apparel study. This study is done on the basis of color preference only by age and the range of this study restricted on womens' clothes. The subjects of this research are 1,100 young adult women and 1,244 elderly women photographed in the street. The data are analyzed by frequency and percentage. The results of this study are as follows ; The preference of chromatic color and achromatic color, tint and tone, pattern of textiles are different mainly by age. 1. Elderly women prefer achromatic colors to chromatic colors. The most preferred achromatic color is black, especially elderly women prefer black. 2. Analysis of tint shows that blue, red and yellow red are commonly preferred by women. Especially blue is preferred by young women : red and yellow red are preferred by elderly women. 3. Analysis of tone shows that vivid, pale, dark tones are commonly preferred by women. Especially vivid tone is preferred by elderly women, while pale tone is preferred by young women 4. Analysis of pattern of textiles shows at, pattern textiles are preferred by elderly women rather than by young women. The most preferred pattern for elderly women is a flower pattern, and for young women a stripe pattern.

  • PDF

황산코발트 용액에 의한 다양한 세라믹소지의 반응 (Reactions of Various Ceramic Materials with Cobalt Sulfate Solution)

  • 원일안;김경남
    • 한국재료학회지
    • /
    • 제24권2호
    • /
    • pp.93-97
    • /
    • 2014
  • In this study, a cobalt sulfate ceramic coating was sintered on various clays at $1250^{\circ}C$. The specimen characteristics were investigated by X-ray diffraction(XRD), scanning electron microscopy(SEM), TG-DTA, UV-vis spectrophotometer, and HRDPM. The ceramic coating had a constant thickness of thousands ${\mu}m$, and the surface was confirmed to be densely fused. Other new compounds were produced by the cobalt sulfate sintering process and reactions. These compounds were a $CoAl_2O_4$ phase, $Co_2SiO_4$ phase, anorthite($CaAl_2Si_2O_8$) phase, and $FeAl_2O_4$ phase, respectively. UV properties of the coated specimen were investigated, celadon clay specimen in 530-550 nm band is showing a dark gray color. The white clay and white mix clay specimen in 460-500 nm band is showing a blue color. The cobalt-aluminate($CoAl_2O_4$) spinel and the cobalt-silicate olivine($Co_2SiO_4$) were the strongest of the ceramic pigments, producing a very pure, navy blue color.

작업장의 공학적 개선을 위한 시뮬레이션 프로그램 활용 (A simulation program practical use for an engineering improvement of the work-place)

  • 양홍석;이강복;윤의식;강경식
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2005년도 춘계학술대회
    • /
    • pp.273-278
    • /
    • 2005
  • Prescribed according to the occupational safety and health low noise measurement method was changed to personal sampling in the method to measure an area noise. Such method had the limit which did not evaluated characteristic of sound of occurrence and the place of origin. This study was performed to establish an engineering remedy of the work-place noise. The subject was a vibration control process of the place of business in Pusan. A simulation program applied for an engineering improvement of the work-place noise. The results were as follows: 1. An noise occurrence level of the work-place before improvement was $88^{\sim}97dB(A)$, We applied an improvement method to be established and were expected to $80^{\sim}119dB(A)$. 2. The level of the noise-distribution to appear in the place of origin of the work-place before improvement was $90^{\sim}93dB(A)$ but, We executed the simulation after applied an engineering remedy and predicted $80^{\sim}85dB(A)$. A result of the simulation blue part was changed mostly into the dark blue color. The results suggest that simulation program establishes an engineering remedy and is useful to the case to apply.

  • PDF

소음작업장 개선효과 예측을 위한 시뮬레이션 프로그램 활용 (A simulation program practical use to forecast the improvement effectiveness of the work place noise)

  • 양홍석;이강복;윤의식;강경식
    • 대한안전경영과학회지
    • /
    • 제7권2호
    • /
    • pp.57-64
    • /
    • 2005
  • Prescribed according to the occupational safety and health low noise measurement method was changed to personal sampling in the method to measure an area noise. Such method had the limit which did not evaluated characteristic of sound of occurrence and the place of origin. This study was peformed to establish an engineering remedy of the work-place noise. The subject was a vibration control process of the place of business in Pusan. A simulation program applied for an engineering improvement of the work-place noise. The results were as follows: 1. An noise occurrence level of the work-place before improvement was $88^{\sim}97dB(A)$, We applied an improvement method to be established and were expected to $80^{\sim}l19dB(A)$, 2. The level of the noise-distribution to appear in the place of origin of the work-place before improvement was $90^{\sim}93dB(A)$ but, We executed the simulation after applied an engineering remedy and predicted $80^{\sim}85dB(A)$. A result of the simulation blue part was changed mostly into the dark blue color. The results suggest that simulation program establishes an engineering remedy and is useful to the case to apply.

Fabrication of an Automatic Color-Tuned System with Flexibility Using a Dry Deposited Photoanode

  • Choi, Dahyun;Park, Yoonchan;Lee, Minji;Kim, Kwangmin;Choi, Jung-Oh;Lee, Caroline Sunyong
    • International Journal of Precision Engineering and Manufacturing-Green Technology
    • /
    • 제5권5호
    • /
    • pp.643-650
    • /
    • 2018
  • A self-powered electrochromic device was fabricated on an indium tin oxide-polyethylene naphthalate flexible substrate using a dye-sensitized solar cell (DSSC) as a self-harvesting source; the electrochromic device was naturally bleached and operated under outdoor light conditions. The color of the organic electrochromic polymer, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate, was shifted from pale blue to deep blue with an antimony tin oxide film as a charge-balanced material. Electrochromic performance was enhanced by secondary doping using dimethyl sulfoxide. As a result, the device showed stable switching behavior with a high transmittance change difference of 40% at its specific wavelength of 630 nm for 6 hrs. To improve the efficiency of the solar cell, 1.0 wt.% of Ag NWs in the photoanode was applied to the $TiO_2$ photoanode. It resulted in an efficiency of 3.3%, leading to an operating voltage of 0.7 V under xenon lamp conditions. As a result, we built a standalone self-harvesting electrochromic system with the performance of transmittance switching of 29% at 630 nm, by connecting with two solar cells in a device. Thus, a self-harvesting and flexible device was fabricated to operate automatically under the irradiated/dark conditions.

Effect of nano-carbon addition on color performance of polystyrene superstructure film

  • ZHOU, Ye-min;Wang, Li-li;LI, Xiao-peng;Wang, Xiu-feng;Jiang, Hong-tao
    • Journal of Ceramic Processing Research
    • /
    • 제19권6호
    • /
    • pp.479-482
    • /
    • 2018
  • Polystyrene superstructure films show faint rainbow color, and this low color saturation limits its wide application. In this paper, polystyrene superstructure films with single bright blue color were prepared by vertical deposition self-assembly method using polystyrene microspheres with average diameter of $310{\pm}10nm$ as raw material. Polystyrene superstructure films were modified by adding nano-carbon powder, and effect of the amount of nano-carbon powde on color performance was studied. The results showed that without addition of nano-carbon powder, the superstructure films showed a faint rainbow color, while with addition of nano-carbon power, the superstructure films exhibited a single bright blue under the same natural light source. Changing the amount of nano-carbon powder addition could adjust color saturation of the film. With increasing the amount of nano-carbon powder addition from 0.008 wt% to 0.01 wt%, color saturation of the superstructure film increased gradually. Further increasing the amount of nano-carbon powder addition to 0.011wt%, color saturation of the superstructure film didn't increase anymore and tended to get dark.