뇌 해마를 떼어버린 흰쥐의 공격적 행동 (Aggressive behavior of Male Rats following Hippocampal Ablation)
-
- The Korean Journal of Physiology
- /
- 제1권2호
- /
- pp.169-175
- /
- 1967
해마가 공격정 행동에 미치는 영향을 알기 위하여 두정-측두 경계 부위 신피질을 양측성으로 둥글게(지름 3 mm 정도) 떼고 이를 거쳐 해마를 거의 완전히 떼어 버린 흰쥐 17마리(해마군)와 신피질에만 지름 3 mm 정도의 손상을 준 흰쥐 8마리(수술대조군) 및 정산 흰쥐 17 마리(정상군)를 마련하여 다음과 같은 실험을 실시하였다. 발에 가해진 전기 충격을 계기로 하여 해마군에 속하는 개체와 정상군에 속하는 개체사이, 해마군에 속하는 개체와 수술대조군에 속하는 개체 및 수술대조군에 속하는 개체와 정산군에 속하는 개체 사이에 싸움을 일으키고 일정한 판단기준에 따라 승리, 패배 및 무승부를 가렸다. 약 2분의 시간 간격을 두고 15회에 걸쳐 반복한 전기 충격에 의하여 얻은 성적을 총괄하여 다음과 같은 결과를 얻었다. 1. 해마군과 정상군 사이의 싸움에서 해마군이 승리를 거둔 수는 정상군의 그것 보다 유의하게 많다. 2. 해마군과 수술대조군 사이의 싸움에 있어서는 두 무리의 성적이 서로 유의하게 다르지 않으나 해마군이 우위를 차지하는 경향만은 뚜렷하다. 3. 수술대조군과 정상군 사이의 싸움에서 수술대조군이 얻은 성적은 정상군의 그것과 비교하여 유의하게 다르지 않다. 위의 실험결과로 미루어 해마는 정상기 공격적 행동을 다소나마 억압하는 경향이 있는 것으로 보인다.
단수수(Sorghum bicolor L. Moench)는 전통적인 식량작물보다 높은 환경적응성과 다양한 용도로 유용한 작물로 평가받아 왔지만, 국내에서는 관련 연구 및 정보의 부족으로 재배가 확대되지 못하고 있다. 본 연구는 단수수 '초롱'의 전라북도 6개 지역(전주, 부안, 정읍, 임실, 남원, 장수)의 최근 30년(1989-2018년)간 기상자료에 근거한 출수기를 추정하고, 파종시기(4월 10일, 4월 25일, 5월 10일, 5월 25일, 6월 10일, 6월 25일)에 따른 생육 및 품질요인 등을 비교하고자 수행하였다. 파종부터 출수까지의 소요일수는 파종시기가 빠를수록 107, 96, 83, 70, 59, 64, 65일로 길어지는 경향을 보였으며, 평균출수소요일수는 77.7일이었다. 유효적산온도는 평균
최근 국제적으로 풍력, 태양광, 파도, 연료전지 등의 친환경 신재생에너지 개발이 활발하다. 특히, 해상에서의 풍력발전단지 개발은 대형화를 통한 단가 절감, 고품질의 풍력자원 활용, 발전기로 인한 소음 피해 최소화를 위해 해안에서 멀리 떨어진 위치에 대규모 부유식으로 건설되는 추세이다. 풍력발전단지의 개발은 해사안전법에 의한 해상교통안전진단제도에 따른 평가가 필요하다. 풍력발전단지의 평가는 해당 수역의 체계적인 개발, 관리, 활용을 위해 선과 면적 개념을 모두 적용하여 수행되어야 하며, 이를 위한 평가 방법과 기준이 개발되어야 한다. 이 연구에서는 해상풍력발전단지처럼 해양 공간을 평가할 수 있는 해상교통조사방법과 평가에 대한 적절한 기준을 수립하고, 이를 시스템적으로 처리할 수 있는 방안에 대해서 연구하였다. 먼저 해상교통조사를 위해 AIS와 레이더를 이용한 이동식 해상교통데이터 수집장치를 설계하였다. 그리고 선과 면적의 개념을 모두 적용한 해상교통 항적도, 밀집도, 경로 분석을 제안하였다. 해상교통밀집도는 Grid-cell의 크기를 조절하여 단위 cell에 대한 공간적, 시간적 점유율을 구분하고 해상교통 경로 분석은 해상을 통항로 또는 작업 공간으로 사용할 때를 구분하여 선박의 이동 패턴을 평가할 수 있도록 제안하였다. 최종적으로 시스템적인 해상교통데이터의 수집과 평가가 가능한 해상교통안전평가솔루션의 개념설계를 수행하였다. 이는 자동적인 해상교통데이터의 수집 저장 분류를 통해, 데이터 누락이나 오표기와 같은 인적 오류를 최소화하고 해상 공간의 용도에 따라 선과 면적 개념을 반영하여 분석함으로써 신뢰성 있는 해상 공간의 평가가 가능하게 한다.
식중독에 의한 사회경제적 손실을 최소화하기 위해서는 식중독과 관련된 경제적 비용 손실을 추정하는 것이 중요하다. 하지만 자료의 부족과 다양한 비용 항목의 존재로 식중독과 관련된 사회경제적 손실비용을 정확하게 추정하기에 어려운 점 있다. 본 연구에서는 국내 식중독 발생에 의한 손실비용을 추정하기에 앞서 국외에서 사용되는 사회경제적 비용항목의 기반 자료 확보를 목적으로 수행되었다. 2009-2019년 국외 식중독과 관련된 사회경제적 손실비용 측정 연구의 사례 조사를 위해 문헌 조사를 실시하였다. 이 연구에서는 사회경제적 손실비용을 크게 의료기간에 방문한 외래/입원환자 및 의료기관에 미방문한 경험환자로 구분하였다. 또한 이들의 직접비용 및 간접비용을 고려하였고, 더 나아가 기업비용 및 행정비용 항목으로 구분하여 조사하였다. 조사 결과 문헌별, 나라별 상이한 비용항목을 사용하여 손실비용을 추정하는 것으로 관찰되었다. 직접의료비의 경우 모든 연구에서 외래 또는 입원진료비를 선정하여 비용을 산출한 것으로 관찰되었기 때문에 나라별 의료서비스의 체제 및 비용에 따라 항목을 선정해야 한다. 직접비의료비의 경우 몇 몇의 연구에서 외래 방문에 소요된 교통비만을 고려하였기 때문에 간병비 고려 여부에 대해서는 더 논의가 필요할 것으로 사료된다. 간접비용 중 조기사망비용, 작업손실비용, 여가손실비용 및 삶의 질 저하/고통비용은 고려하였으나, 병문안 기회비용은 모든 연구에서 고려하지 않았다. 직접의료비와 마찬가지로 행정비용의 경우에도 국가별 정부 예산이 상이하기 때문에 각 나라에 맞는 항목을 고려해야할 것이다. 따라서 이러한 조사 결과를 바탕으로 국내 식중독 발생에 의한 사회경제적 손실비용 분석을 위해 어떠한 비용 항목을 고려해야 할 것인지에 대한 검증절차가 필요할 것이다. 본 연구는 국내 식중독 발생에 의한 사회경제적 손실비용 분석을 위한 기초적인 정보를 제공할 것이다.
수자원 관리와 수재해 피해 분석 및 예측 등을 위해 원격탐사를 활용한 수체면적을 추정하는 것은 매우 필수적이다. 위성을 활용한 수체탐지는 주로 광학 및 영상레이더(Synthetic Aperture Radar, SAR) 센서를 탑재한 대형(무게 1,000kg 이상) 위성을 중심으로 수행되어왔다. 그러나 긴 재방문주기(repeat cycle)로 인해 재난/재해 시 적시 활용이 불가능한 한계가 존재한다. 최근 초소형위성(무게 100kg 미만) 개발이 활발히 이루어짐에 따라 기존 대형위성 중심의 시간해상도 한계를 극복할 수 있는 계기가 되었다. 현재 활발히 운용중인 초소형 SAR 위성은 핀란드의 ICEYE와 미국의 Capella 위성으로, 지구관측을 목적으로 군집(constellation) 형태로 운용되고 있다. 군집화 운용으로 인해 짧은 재방문주기(현재 0.8회/1일) 및 고해상도(Spot(0.5m))를 가지며, SAR센서 탑재로 기상 및 주야 무관하게 관측이 가능한 장점이 있다. 본 연구에서는 초소형위성의 운영 현황 및 특징에 대해서 기술하였으며, 초소형 SAR 위성 영상에 최적화된 수체면적 추정기술을 한반도 대청댐 유역에 적용해 보았다. 또한 광학 위성인 Sentinel-2 위성으로부터 생성된 수체를 참조값(reference)으로 하여 초소형위성 2기와 대형위성인 Sentinel-1위성과의 면적, 상관성 분석을 수행하였다. Capella 위성의 경우 가장 적은 면적의 차를 보였으며, 세 영상 모두 높은 상관관계를 나타냄을 확인하였다. 본 연구의 결과를 통해 초소형 SAR 위성의 낮은 NESZ(Noise Equivalent Sigma Zero)에도 불구하고 수체면적 추정이 가능함을 확인하였으며, 기존 대형 SAR 위성을 활용한 수자원/수재해 감시 활용의 한계를 극복할 수 있을 것으로 사료된다.
기후변화로 인한 대형 산불의 빈도가 증가함에 따라 극심한 인명 및 재산상의 피해를 초래하고 있다. 이로 인해 많은 식생이 소실되며, 그 강도와 발생 형태에 따라 생태계 변화에 영향을 끼친다. 생태계 변화는 다시 산불 발생을 유발하여 2차 피해를 야기한다. 따라서 산불 피해지에 대한 정확한 탐지 및 면적 산정의 중요성이 지속적으로 제기되고 있다. 효율적인 산불 피해지 모니터링을 위해 산불 발생 후 실시간 지형 및 기상정보는 물론 피해지역의 영상을 대규모로 취득할 수 있는 위성영상이 주로 활용되고 있다. 최근, 합성곱 신경망(convolution neural network, CNN) 기반 모델부터 고성능 트랜스포머(Transformer) 기반 모델에 이르기까지 딥러닝 알고리즘이 빠르게 발전하면서 산림원격탐사에서 이를 적용한 연구가 활발히 이루어지고 있다. 하지만 현재까지 적용된 딥러닝 모델은 제한적이며 현업에서의 합리적인 활용을 위한 정량적 성능평가에 대한 보고가 부족한 상황이다. 따라서 본 연구에서는 모델에 따른 성능향상과 데이터 설계에 따른 성능향상을 중점적으로 비교 분석하였다. 미국 캘리포니아 지역을 대상으로 CNN 기반 모델의 U-Net, High Resolution Network-Object Contextual Representation (HRNet-OCR)을 활용하여 산불 피해지 모델을 구축하였다. 또한, 기본 파장대역과 함께 식생활력도 및 지표의 수분함량 정도를 고려하고자 normalized difference vegetation index (NDVI), normalized burn ratio (NBR)와 같은 산불 관련 분광지수를 산출하여 입력 이미지로 사용하였다. U-Net의 mean intersection over union (mIoU)이 0.831, HRNet-OCR이 0.848을 기록하여 두 모델 모두 우수한 영상분할 성능을 보였다. 또한, 밴드 반사도뿐 아니라 분광지수를 추가한 결과 모든 조합에서 평가지표 값이 상승하여 분광지수를 활용한 입력 데이터 확장이 픽셀 세분화에 기여함을 확인하였다. 이와 같은 딥러닝 방법론을 발전시킨다면 우리나라의 산불 피해지에 대한 신속한 파악 및 복구 계획 수립의 기초자료로 활용될 수 있을 것으로 기대된다.
The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.
본 연구는 퇴비원료로 지정된 제약업종 부산물(공정오니) 및 화장품 제조업 폐수처리오니를 퇴비로서 활용 가능성을 판단하기 위하여 기존의 일반성분이나 중금속 성분 분석 이외 유기성. 화합물과 기타 여러 생물검정법 등을 활용하여 시용한 오니에 의한 토양 내 비료의 피해를 밝혀내고 이들의 평가방법을 확립하고자 포장시험을 수행하였다. 오니의 처리에 따른 HEM의 함량은 제약업종 오니2(PS2)와 화장품 오니(CS)처리가 각각 0.51, 1.10 mg/kg로 가장 높았고, PAHs의 함량은 제약업종 오니2(PS2) 처리에서
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70