• CELLMED
• /
• v.10 no.3
• /
• pp.22.1-22.7
• /
• 2020

Introduction: Qūbā (Tinea Corporis) is a very common disease widely prevalent worldwide. 20 - 25 % individuals suffer for this stubborn disease. Unani System of Medicine offers its treatment. There are many pharmacopoeial formulations indicated for various types of dermatophytic infections. In this study clinical efficacy and safety of the topical Unani formulation Marham Kharish Jadeed (a compound drug in the dosage form of an ointment) was assessed and compared with a standard conventional medicine. Materials and methods: A clinical study was conducted on 60 participants of qūbā randomized into test and control groups (n=30 in each group). The participants were clinically diagnosed and confirmed by microscopy of skin scrapings. The efficacy of the Unani formulation was assessed in terms of TSS score and elimination of fungal elements from the skin lesions. The data collected were analyzed statistically. Results and discussion: The study showed that the Unani formulation had comparatively better efficacy clinically than conventional medicine Terbinafine hydrochloride 1% cream in terms of reduction of itching, erythema, scaling, peripheral raised margins of the lesion comparing to baseline. In this study, 27 participants in test group and 18 participants in control group were completely cured (≥75% reduction in TSS Score with Mycological Cure) after 4 weeks of treatment. The efficacy of the Unani formulation was found significant statistically. The individual drugs of the formulations having analgesic (Musakkin), blood purifier (Muṣaffi-i-Dam), demulcent (Mulaṭṭif), antifungal (Qātil-i-fafūndῑ), detergent (Jālῑ), refrigerant (Mubarrid) and antiseptic (Dāfi'-i-'Ufūnat) properties might be responsible for the efficacy of Unani formulation. Conclusion: The findings of the study suggested that the Unani formulation was found effective and safe in the management of qūbā. No local and systemic adverse effect was reported during the study.

• Journal of Korea Water Resources Association
• /
• v.47 no.2
• /
• pp.135-143
• /
• 2014

In this study, Chungju inflow was simulated for climate change considering the uncertainties of GCMs and a stochastic model. TFN (Transfer Function Noise) model and 4 different GCMs (CNRM, CSIRO, CONS, UKMO) based on IPCC AR4 A2 scenario were used. In order to evaluate uncertainty of TFN model, 100 cases of noises are applied to the TFN model. Thus, 400 cases of inflow results are simulated. Future inflows according to the GCMs show different rates of changes for the future 3 periods relative to the past 30-years reference period. As the results, the summer inflow shows increasing trend and the spring inflow shows decreasing trend based on AR4 A2 scenario.

• Smart Structures and Systems
• /
• v.33 no.2
• /
• pp.93-103
• /
• 2024

Despite the rapid development of sensors, structural health monitoring (SHM) still faces challenges in monitoring due to the degradation of devices and harsh environmental loads. These challenges can lead to measurement errors, missing data, or outliers, which can affect the accuracy and reliability of SHM systems. To address this problem, this study proposes a classification method that detects anomaly patterns in sensor data. The proposed classification method involves several steps. First, data scaling is conducted to adjust the scale of the raw data, which may have different magnitudes and ranges. This step ensures that the data is on the same scale, facilitating the comparison of data across different sensors. Next, informative features in the time and frequency domains are extracted and used as input for a deep neural network model. The model can effectively detect the most probable anomaly pattern, allowing for the timely identification of potential issues. To demonstrate the effectiveness of the proposed method, it was applied to actual data obtained from a long-span cable-stayed bridge in China. The results of the study have successfully verified the proposed method's applicability to practical SHM systems for civil infrastructures. The method has the potential to significantly enhance the safety and reliability of civil infrastructures by detecting potential issues and anomalies at an early stage.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.299-303
• /
• 2001

In this paper, we introduce the Partial Half-Through Type Plate Girder Bridge proposed by Hyundai Development Co. and KRTC Consortium in Turn-Key Based design last year, and this type of bridge may be adapted to the railway bridge under similar conditions. This bridge across the North Han River was to be concerned its find view and the protection of water source. For its location is inside the dam, it required the long span and the clearance for the flood also. Its new composite section was able to diminish the deflection and vibration. Its shop-fabrication could control its quality easily, and might to be launched. This structural type have satisfied its functions, construction situations, and overall safeties, so this is the field-oriented type. However the composition and connections of the proposed members are different to the recent forms, and difficult to be applied to present specifications. Therefore it requires a certification on the application for more safety by not only analytical verifications but also experimental studies. Nevertheless, this type of bridge may have some more applications from now on.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.559-565
• /
• 2005

As the wave impinges on and overtops the structure, a large highly aerated region is created in front of the structure and water splashs on top of the structure. The broken wave in front of the structure and associated green water on top of the structure are highly aerated containing not only a large number of bubbles but also very large sizes of bubbles. In this paper, the velocity field of the highly aerated region and the splashing water on the top is measured using a modified PIV method incorporating the traditional PIV method with the shadowgraphy technigue by correlating the ' texture ' of the bubble images. The velocity fields of a plunging wave impacting on a structure in a two-dimensional wave flume is measured. It is found that the maximum fluid particle velocity in flout of the structure during the impinging process is about 1.5 times the phase speed of the wave, while the maximum horizontal velocity above the top is less than the phase speed, It is also found that the dam breaking solution does not work well in predicting the green water velocity.

• Smart Structures and Systems
• /
• v.21 no.2
• /
• pp.195-205
• /
• 2018

Research on Lamb wave-based damage identification in plate-like structures depends on precise knowledge of dispersive wave velocity. However, boundary reflections with the same frequency of interest and greater amplitude contaminate direct waves and thus compromise measurement of Lamb wave dispersion in different materials. In this study, non-reflecting boundaries were proposed in both numerical and experimental cases to facilitate time-frequency characterization of Lamb wave dispersion. First, the Lamb wave equations in isotropic and laminated materials were analytically solved. Second, the non-reflecting boundaries were used as a series of frames with gradually increased damping coefficients in finite element models to absorb waves at boundaries while avoiding wave reflections due to abrupt property changes of each frame. Third, damping clay was sealed at plate edges to reduce the boundary reflection in experimental test. Finally, the direct waves were subjected to the slant-stack and short-time Fourier transformations to calculate the dispersion curves of phase and group velocities, respectively. Both the numerical and experimental results suggest that the boundary reflections are effectively alleviated, and the dispersion curves generated by the time-frequency analysis are consistent with the analytical solutions, demonstrating that the combination of non-reflecting boundary and time-frequency analysis is a feasible and reliable scheme for characterizing Lamb wave dispersion in plate-like structures.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.1027-1044
• /
• 2017

Membrane penetration is the most important factor influencing the measurement of volume change for triaxial consolidated-drained shear test for coarse-grained soil. The effective pressure p, average particle size $d_{50}$, thickness $t_m$ and elastic modulus $E_m$ of membrane, contact area between membrane and soil $A_m$ as well as the initial void ratio e are the major factors influencing membrane penetration. According to the membrane deformation model given by Kramer and Sivaneswaran, an analytical solution of the membrane penetration considering the initial void ratio is deduced using the energy conservation law. The basic equations from theory of plates and shells and the elastic mechanics are employed during the derivation. To verify the presented solution, isotropic consolidation tests of a coarse-grained soil are performed by using the method of embedding different diameter of iron rods in the triaxial samples, and volume changes due to membrane penetration are obtained. The predictions from presented solution and previous analytical solutions are compared with the test results. It is found that the prediction from presented analytical solution agrees well with the test results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.427-427
• /
• 2015

The storm water management and drainage relation are the key variable that plays a vital role on hydrological design and risk analysis. These require knowledge about spatial variability over a specified area. Generally, design rainfall values are expressed from the fixed point rainfall, which is depth at a specific location. Concurrently, determine the areal rainfall amount is also very important. Therefore, a spatial rainfall interpolation (point rainfall converting to areal rainfall) can be solved by areal reduction factor (ARF) estimation. In mainland of South Korea, for dam design and its operation, public safety, other surface water projects concerned about ARF for extreme hydrological events. In spite of the long term average rainfall (2,061 mm) and increasing extreme rainfall events, ARF estimation is also essential for Jeju Island's water control structures. To meet up this purpose, five fixed rainfall stations of automatic weather stations (AWS) near the "Hancheon Stream Watershed" area has been considered and more than 50 years of high quality rainfall data have been analyzed for estimating design rainfall. The relationship approach for the 24 hour design storm is assessed based on ARF. Furthermore, this presentation will provide an outline of ARF standards that can be used to assist the decision makers and water resources engineers for other streams of Jeju Island.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.21-21
• /
• 2018

수자원 시스템의 용수공급의 안정도를 평가하는 지표로 국내에서는 이수안전도 혹은 안전채수량(safety degree for water shortage or safe yield)의 개념이 이용된다. 아울러 공급 측면에서는 기준갈수량, 공급신뢰도, 저수용량 등이 분석되고 있으며, 수요 측면에서는 용수공급 보장일수, 최소 부족량, 갈수 조정기간 및 용수부족에 따른 피해정도 등을 고려하고 있다. 전통적으로 수자원 시스템의 평가는 용수공급 실패기간의 통계적 특성을 분석하여 이루어진다. 용수공급 실패기간으로부터 분석되는 통계적 특성은 용수부족 발생빈도, 용수부족 지곡기간 및 용수부족 총 양 등 세 가지로 정량화되는 것이 일반적이다. 수자원 시스템이 수요를 만족시키는 정도인 신뢰도(reliability), 용수부족 발생 후 얼마나 빨리 회복하는지를 나타내는 회복도(resilience) 및 용수부족의 양적 크기를 나타내는 취약도(vulnerability)의 지표는 앞서 언급된 세 가지 통계 특성으로부터 계산된다. 본 연구에서는 Copula 기반 이변량 빈도해석 개념을 적용하여 댐 용수공급 취약성 평가 방법을 개선한 후, 국내 남강 댐 유역의 용수공급 취약성을 평가해보고자 한다. 이를 위해, 국내외에서 이용되고 있는 용수공급 평가지표들의 특성들을 정리하였다. 다음으로는, 취약성 평가 방법에 Copula 기반 이변량 빈도해석 방법을 적용하는 방법을 제안하였다. 본 연구의 분석은 용수공급 실패 사상을 기준으로 수행되었으며, 용수공급 실패 사상의 발생확률은 포아송 분포, 총 부족량은 대수정규분포로 모의되었다. 최종적으로는 남강 댐의 재현기간별 취약성 평가 결과를 도출하여 본 연구에서 제안한 취약성 평가방법의 적용성을 검증하였다.

• Structural Engineering and Mechanics
• /
• v.69 no.5
• /
• pp.557-566
• /
• 2019

The reservoir basin bedrock produced significant impact on the long-term service safety of super-high arch dams. It was important for accurately identifying geomechanical parameters and its evolution process of reservoir basin bedrock. The deformation modulus mechanism research methods of reservoir basin bedrock deformation modulus for super-high arch dams was carried out by finite element numerical calculation of the reservoir basin bedrock deformation and in-situ monitoring data analysis. The deformation modulus inversion principle of reservoir basin bedrock in a wide range was studied. The convergence criteria for determining the calculation range of reservoir basin of super-high arch dams was put forward. The implementation method was proposed for different layers and zones of reservoir basin bedrock. A practical engineering of a super-high arch dam was taken as the example.