• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.987-1001
• /
• 2021

One of the most critical issues in the dairy industry, alongside the low birth rate and the aging population, is the decrease in demand for milk. In this study, the consumption trends of 12 major dairy products distributed in Korea were predicted using a logistic model, the Gompertz model, and the Bass diffusion model, which are representative S-shaped growth models. The 12 dairy products are fermented milk (liquid type, cream type), butter, milk powder (modified, whole, skim), liquid milk (market, flavored), condensed milk, cheese (natural, processed), and cream. As a result of the analysis, the growth potential of butter, condensed milk, natural cheese, processed cheese, and cream consumption among the 12 dairy products is relatively high, whereas the growth of the remaining dairy product consumption is expected to stagnate or decrease. However, butter and cream are by-products of the skim milk powder manufacturing process. Therefore, even if the consumption of butter and cream grows, it is difficult to increase the demand of domestic milk unless the production of skim milk powder produced from domestic milk is also increased. Therefore, in order to support the domestic dairy industry, policy support should be focused on increasing domestic milk usage for the production of condensed milk, natural cheese, and processed cheese.

• Food Science of Animal Resources
• /
• v.44 no.6
• /
• pp.1453-1461
• /
• 2024

The presence of cortisol residue in processed dairy milk may be a good parameter for assessing the quality of dairy milk products and an alternative indicator of the overall welfare of dairy cattle. Thus, this study investigated the impact of heat processing on milk cortisol concentration (MCC). In total, 36 milk samples (50 mL) were collected from three Holstein dairy cattle at a research farm over two consecutive days. The samples were divided into experimental groups: unheated, heated at 65℃ for 30 min, and heated at 121℃ for 5 min. Additionally, 11 commercial dairy milk products were purchased under three heating conditions: low temperature, low time (LTLT), ultra-short time (UST), and ultra-high temperature (UHT). MCC was analyzed using an enzyme immunoassay. The average farm MCC (ng/mL) for the unheated milk, milk heated at 65℃, and milk heated at 121℃ were 0.88±0.16, 0.86±0.19, and 0.80±0.15, respectively. MCC was not significantly affected by the heating process. The average market MCC (ng/mL) in LTLT, UST, and UHT were 0.16±0.07, 0.15±0.08, and 0.15±0.07, respectively. Overall, cortisol levels in fresh farm milk were unaffected by the heating process. Monitoring cortisol levels in processed milk could offer a valuable alternative indicator for assessing product quality and animal welfare, particularly when access to raw milk is limited.

• Journal of Food Hygiene and Safety
• /
• v.11 no.2
• /
• pp.107-114
• /
• 1996

The distribution of Listeria spp. in various foods and its fatty acid composition were examined. A total 60 samples of dairy products(15), seafoods(20), meat products(18), factory waster(2), and salades(5) were tested. Listeria spp. was found 10 samples, showing about 16.7% detection ratio; dairy products 0(0%),,seafoods 1(5%), meat product 7(38.9%), and factory wastes 2(100%). Whereas L. welshimeri was isolated from meat products 1(5.6%) and factory wastes 1(50%). The cellular fatty acid composition determined by gas chromatography was found not to differ among L. innocua isolated from food has similar fatty acid profiles when grown at 3$0^{\circ}C$,24 hrs on the tryptic soy plate with C15 and C17 anteiso branched acids accounting for about 80% of total.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.2
• /
• pp.129-137
• /
• 2015

Diabetes mellitus type 2 is a metabolic disorder that is characterized by hyperglycemia (high blood sugar level) in the context of insulin resistance and relative lack of insulin. Recently, much scientific evidence has shown that the risk of diabetes mellitus type 2 could be reduced by dairy intake. A significantly strong relationship has been noted between this disease and dairy intake. In particular, from the different types of fat in dairy foods that were reported to have a beneficial impact, low-fat dairy foods have been found to have the best effect with respect to reducing the risk of diabetes mellitus type 2. Therefore, the role of specific components of dairy foods, such as calcium, vitamin D, dairy fat, and trans-palmitoleic acid, which could be responsible for this effect and for the positive effect of dairy foods in obesity and metabolic syndrome, needs to be identified. There is a strong and relatively consistent body of accumulating evidence indicating that dairy foods may significantly reduce the risk of diabetes mellitus type 2, likely in a dose-response manner. Dairy recommendations should be an essential part of public health guidance, and identifying strategies to increase dairy food consumption to optimal levels is of utmost importance. Hence, this review summarizes various positive effects of dairy foods with respect to reducing the risk of diabetes mellitus type 2, based on available evidence, and discusses the need for further research on preventing or decreasing the risk of diabetes mellitus type 2.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.4
• /
• pp.271-278
• /
• 2016

The main purpose of milk heat-treatment is to improve milk safety for consumer by destroying foodborne pathogens. Secondly, heat-treatment of milk is to increase maintaining milk quality by inactivating spoilage microorganisms and enzymes. Pasteurization is defined by the International Dairy Federation (IDF, 1986) as a process applied with the aim of avoiding public health hazards arising from pathogens associated with milk, by heat treatment which is consistent with minimal chemical, physical and organoleptic changes in the product. Milk pasteurization were adjusted to $63{\sim}65^{\circ}C$ for 30 minutes (Low temperature long time, LTLT) or $72{\sim}75^{\circ}C$ for 15 seconds (High temperature short time, HTST) to inactivate the pathogens such as Mycobacterium bovis, the organism responsible for tuberculosis. Ultra-high temperature processing (UHT) sterilizes food by heating it above $135^{\circ}C$ ($275^{\circ}F$) - the temperature required to destroy the all microorganisms and spores in milk - for few seconds. The first LTLT system (batch pasteurization) was introduced in Germany in 1895 and in the USA in 1907. Then, HTST continuous processes were developed between 1920 and 1927. UHT milk was first developed in the 1960s and became generally available for consumption in the 1970s. At present, UHT is most commonly used in milk production.

• Food Science of Animal Resources
• /
• v.44 no.2
• /
• pp.309-325
• /
• 2024

The consumption of meat has been increasing, leading to a dynamic meat and meat processing industry. To maintain the quality and safety of meat products, various technologies have been explored, including intense pulsed light (IPL) technology. Several factors affect the inactivation of microorganisms by IPL treatment, including light intensity (fluence), treatment duration, pulse frequency, and the distance between the lamp and the samples. Meat products have been studied for IPL treatment, resulting in microbial reductions of approximately 0.4-2.4 Log. There are also impacts on color, sensory attributes, and physico-chemical quality, depending on treatment conditions. Processed meat products like sausages and ham have shown microbial reductions of around 0.1-4 Log with IPL treatment. IPL treatment has minimal impact on color and lipid oxidation in these products. Egg products and dairy items can also benefit from IPL treatment, achieving microbial reductions of around 1-7.8 Log. The effect on product quality varies depending on the treatment conditions. IPL technology has shown promise in enhancing the safety and quality of various food products, including meat, processed meat, egg products, and dairy items. However, the research results on animal-based food are not diverse and fragmentary, this study discusses the future research direction and industrial application through a review of these researches.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.397-408
• /
• 2022

Rinse & Chill^® technology (RCT) entails rinsing the vasculature using a chilled isotonic solution (3℃; 98.5% water and a blend of dextrose, maltose, and sodium phosphates) to rinse out the residual blood from the carcass. Infusion of pre-chilled solutions into intact animal carcasses immediately upon exsanguination is advantageous in terms of lowering the internal muscle temperature and accelerating chilling. This technology is primarily used for purposes of effective blood removal, favorable pH decline, and efficient carcass chilling, all of which improve meat quality and safety. Although RCT solution contains some substrates, the pre-rigor muscle is still physiologically active at the time of early postmortem and vascular rinsing. Consequently, these substrates are fully metabolized by the muscle, leaving no detectable residues in meat. The technology has been commercially approved and in continuous use since 2000 in the United States and since 1997 in Australia. As of January 2022, 23 plants have implemented RCT among the 5 countries (Australia, US, Canada, New Zealand, and Japan) that have evaluated and approved RCT. All plants are operating under sound Sanitation Standard Operation Procedures (SSOP) and a sound Hazard Analysis Critical Control Point (HACCP) program. No food safety issues have been reported associated with the use of this technology. RCT has been adapted by the meat industry to improve product safety and meat quality while improving economic performance. Therefore, this review summarizes highlights of how RCT technically works on a variety of animal types (beef, bison, pork, and lamb).

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.1-15
• /
• 2015

Before the advent of pasteurization and other microbiological controls in the dairy industry, milk product-borne diseases such as scarlet fever, typhoid fever, septic sore throat, and tuberculosis were globally widespread. Pasteurization was invented by Louis Pasteur, and it has been considered as one of the most effective ways to control milk product-borne diseases since the 20th century. Nevertheless, till date, various types of cheese in the EU, the USA, and other countries are made from unpasteurized milk as artisan cheese, following the specific food regulations of each nation. Furthermore, after the effectiveness of the Free Trade Agreement (FTA) negotiations between Korea and many nations, the import of various types of cheese made in different conditions and influenced by acidity, preservatives, temperature, competing flora, water activity, and salt concentration increased yearly. Hence, the objective of this review was to describe (1) the 60-day aging rule of cheese, (2) characteristics of the outbreaks linked to cheese manufactured from unpasteurized milk since 1998 to 2011 in USA, and (3) serious health risks from unpasteurized milk, to ensure food protection and safety and to use this basic information for risk assessment.

• Journal of Dairy Science and Biotechnology
• /
• v.31 no.1
• /
• pp.51-58
• /
• 2013

Emerging studies suggest that vegetables or fruit juices deemed to be potential alternative base medium for lactic acid bacteria fermentation. Until now, limited studies have been carried out to evaluate such applications. Thus, the objective of present study is that lactic acid bacteria were evaluated for their viability at low pH, growth during storage at low temperature, and $CO_2$ formation. Furthermore, the effects of grapefruit extract with respect to cell viability, sensory ability, and organic acid production were evaluated for these strains. The probiotic properties of the strains, including acid tolerance, bile tolerance, and adhesion to human intestinal epithelial cells (HT-29 cells), prebiotic characteristics, and safety features were examined. All strains survived in MRS medium broth adjusted to pH 3.8, at $10^{\circ}C$ for 6 days, and did not produce $CO_2$ to check post fermentation. The medium of grapefruit extract fermentation by Lactobacillus plantarum CJIH 203 resulted in maximal viable counts, compared with other strains, and the extract subsequently tasted sour due to the presence of lactic acid. Lactobacillus plantarum CJIH203 was highly resistant to artificial gastric juice and intestinal juice, while Lactococcus lactis SJ09 strongly adhered to HT-29 cells. Tagatose showed the greatest ability to enhance the growth of L. plantarum SJ21, relative to the other strains. All strains were verified by safety tests such as hemolysis, gelatin hydration, and urea degradation. Therefore, these strains could be promising candidates for use in reducing excessive post-fermentation and functional products.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.3
• /
• pp.152-161
• /
• 2017

Cheese is an excellent substrate for yeast and mold growth. These organisms can cause cheese spoilage, resulting in significant food wastage and economic losses. In the context of cheese spoilage, the presence and effects of spoilage or pathogenic bacteria are well documented. In contrast, although yeasts and molds are responsible for much dairy food wastage, only a few studies have examined the diversity of spoilage fungi. This article reviews the spoilage yeasts and molds affecting cheeses in various countries. The diversity and number of fungi present were found to depend on the type of cheese. Important fungi growing on cheese include Candida spp., Galactomyces spp., Debaryomyces spp., Yarrowia spp., Penicillium spp., Aspergillus spp., Cladosporium spp., Geotrichum spp., Mucor spp., and Trichoderma spp.. In addition, several mold spoilage species, such as Aspergillus spp. and Penicillium spp., are able to produce mycotoxins, which may also be toxic to humans. There are many ways to eliminate or reduce toxin levels in foods and feeds. However, the best way to avoid mycotoxins in cheese is to prevent mold contamination since there are limitations to mold degradation or detoxifications in cheese. Chemical preservatives, natural products, and modified atmosphere packaging have been used to prevent or delay mold spoilage and improve product shelf life and food safety.