• Journal of the Korea Society of Computer and Information
• /
• v.29 no.5
• /
• pp.39-46
• /
• 2024

In this paper, we propose a low-cost wearable device that can monitor the health status of the elderly living alone in real-time. As aging is accelerating, the elderly population is rapidly increasing, and the social isolation of the elderly living alone is causing physical and mental difficulties and the number of elderly people dying alone is increasing, becoming a social problem. In this study, we propose a belly band-type wearable device that can monitor the biometric information of elderly living alone. The proposed device transmits electromyogram, electrocardiogram, and body temperature information to a remote server through an Arduino-based sensor built into the abdominal band. Transmitted information can be monitored in a web environment in real-time, and it has the feature of enabling remote monitoring of a large number of subjects with a small amount of management manpower. The research results will contribute to improving the safety and welfare of seniors living alone by not only detecting lonely deaths in advance but also responding immediately to dangerous situations that may occur in daily life.

• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2007

A system to non-invasively fix and monitor eye by a head mounted display (HMD) with a CCD camera for stereotactic radiotherapy (SRS) of uveal melanoma has been developed and implemented clinically. The eye fixing and monitoring system consists of a HMD showing patient a screen for fixing eyeball, a CCD camera monitoring patient's eyeball, and an immobilization mask. At flrst, patient's head was immobilized with a mask. Then, patient was Instructed to wear HMD, to which CCD camera was attached, on the mask and see the given reference point on its screen. While patient stared at the given point in order to fix eyeball, the camera monitored Its motion. Four volunteers and one patient of uveal melanoma for SRS came into this study. For the volunteers, setup errors and the motion of eyeball were analyzed. For the patient, CT scans were peformed, with patient's wearing HMD and fixing the eye to the given point. To treat patient under the same condition, daily CT scans were also peformed before every treatment and the motion of lens was compared to the planning CT Setup errors for four volunteers were within 1mm and the motion of eyeball was fixed within the clinically acceptable ranges. For the patient with uveal melanoma, the motion of lens was fixed within 2mm from daily CT scans. An eye fixing and monitoring system allowed Immobilizing patient as well as monitoring eyeball and was successfully implemented in the treatment of uveal melanoma for SRS.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.104-111
• /
• 2008

The ECG is biomedical electrical signal occurring on the surface of the body due to the contraction and relaxation of the heart. This signal represents an extremely important measure for health monitoring, as it provides vital information about a patient's cardiac condition and general health. ECG signals are contaminated with high frequency noise such as power line interference, muscle artifact and low frequency nose such as motion artifact. But it is difficult to filter nose from ECG signal, and errors resulting from filtering can distort a ECG signal. The present study implemented a small-size and low-power ECG measurement system that can remove motion artifact for convenient health monitoring during daily life. The implemented ECG monitoring system consists of ECG amplifier, a low power microprocessor, bluetooth module and monitoring program. Amplifier was designed and implemented using low power instrumentation amplifier, and microprocessor was interfaced to the ECG amplifier to collect the data, process, store and feed to a transmitter. And bluetooth module used to wirelessly transmit and receive the vital sign data from the microprocessor to an PC at the receiving site. In order to evaluate the performance of the implemented system, we assessed motion artifact rejection performance in each situation with artificially set condition using adaptive filter.

• Asian Journal of Atmospheric Environment
• /
• v.7 no.4
• /
• pp.177-190
• /
• 2013

Air pollution trends in Japan between 1970 and 2012 were analyzed, and the impact of air pollution countermeasures was evaluated. Concentrations of CO decreased from 1970 to 2012, and in 2012, the Japanese environmental quality standard (EQS) for CO was satisfied. Concentrations of $SO_2$ dropped markedly in the 1970s, owing to use of desulfurization technologies and low-sulfur heavy oil. Major reductions in the sulfur content of diesel fuel in the 1990s resulted in further decreases of $SO_2$ levels. In 2012, the EQS for $SO_2$ was satisfied at most air quality monitoring stations. Concentrations of $NO_2$ decreased from 1970 to 1985, but increased from 1985 to 1995. After 1995, $NO_2$ concentrations decreased, especially after 2006. In 2012, the EQS for $NO_2$ was satisfied at most air quality monitoring stations, except those alongside roads. The annual mean for the daily maximum concentrations of photochemical oxidants (OX) increased from 1980 to 2010, but after 2006, the $98^{th}$ percentile values of the OX concentrations decreased. In 2012, the EQS for OX was not satisfied at most air quality monitoring stations. Non-methane hydrocarbon (NMHC) concentrations generally decreased from 1976 to 2012. In 2011, NMHC concentrations near roads and in the general environment were nearly the same. The concentration of suspended particulate matter (SPM) generally decreased. In 2011, the EQS for SPM was satisfied at 69.2% of ambient air monitoring stations, and 72.9% of roadside air-monitoring stations. Impacts from mineral dust from continental Asia were especially pronounced in the western part of Japan in spring, and year-round variation was large. The concentration of $PM_{2.5}$ generally decreased, but the EQS for $PM_{2.5}$ is still not satisfied. The air pollution trends were closely synchronized with promulgation of regulations designed to limit pollutant emissions. Trans-boundary OX and $PM_{2.5}$ has become a big issue which contains global warming chemical species such as ozone and black carbon (so called SLCP: Short Lived Climate Pollutants). Cobeneficial reduction approach for these pollutants will be important to improve both in regional and global atmospheric environmental conditions.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.1-11
• /
• 2016

This study deals with the case that was the field application of the microseismic monitoring techniques for the stability monitoring in a domestic mine. The usefulness and limitations of the microseismic techniques were examined through analyzing the microseismic monitored data. The target limestone mine adopted a hybrid room-and-pillar mining method to improve the extraction ratio. The accelerometers were installed in each vertical pillar within the test bed which has the horizontal cross-section $50m{\times}50m$. The measured signals were divided into 4 types; blasting induced signal, drilling induced signal, damage induced signal, and electric noise. The stability analysis was performed based on the measured damage induced signals. After the blasting in the mining section close to the test bed, the damage of the pillar was increased and rockfall near the test bed could be estimated from monitored microseismic data. It was possible to assess the pillar stability from the changes of daily monitored data and the proposed safety criteria from the accumulated monitored data. However, there was a difficulty to determine the 3D microseismic source positions due to the 2D local sensor arrays. Also, it was needed to use real-time monitoring methods in domestic mines. By complementing the problems encountered in the mine application and comparing microseismic monitored data with mining operations, the microseismic monitoring technique can be used as a better safety method.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.442-452
• /
• 2010

Our team carried out a new program for public engagement on nanotechnology in Korea. We chose 22 monitors, who majored in science or technology and graduated from universities long time ago. Most of them were married and housewives. This 'focus group' had not only general knowledge about science or technology but also much interest in social activities. The 167 nanoproducts to be monitored were for daily life, e.g. home appliances (washing machine, refrigerator, water purifier, etc), clothing, cosmetics, food, toy, and others. And the period of it was one month. The monitors had a sheet with 10 questions, and filled them out in essay form. All of them submitted 2~3 sheets every weekend to our team. Before monitoring, our team had a meeting for introduction and explanation about the potential risk of nanotechnology as well as benefits from it. Another meeting was held after finishing monitoring to share their experience one another. The main results of the monitoring were as follows: the number of nanoproducts describing both the definition of 'nano' and the size of nanomaterials was just 2 (1.2%) the number of them explaining the technical methods enough was 15 (9/0%) the number of them accounting for the reason of functional improvement enough was 14(8.4%); the number of them doubtful as if there would be exaggeration or false knowledge was 27 (16.2%); the number of them commenting potential hazards to human health or environment was almost zero; the number of them describing about safety certification acceptable was 9 (5.4%). The monitors made a proposal containing recommendation to Government and industry. The contents were as follows: industry should make the manual in detail and correctly, Describe Certificate detailed and correctly, Do research on risk and toxicity continually, Educate employee about nanoproducts at consumer's center; Government should make indication of nanoproducts compulsory, Appoint Certificate Authority and make Certificate Mark guaranteeing the safety on nanoproducts, Make detailed explanation about nanoproducts compulsory.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.244-254
• /
• 2009

This paper describes a remote system to monitor the circadian behavioral patterns of elders who live alone. The proposed system was designed and implemented to provide more conveniently and reliably the required functionalities of a remote monitoring system for elders based on the development of first phase prototype[2]. The developed system is composed of an in-house sensing system and a server system. The in-house sensing system is a set of wireless sensor nodes which have pyroelectric infrared (PIR) sensor to detect a motion of elder. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to caregivers (friends, family and social workers) for more cost effective intelligent care service. The improved second phase system can provide 'automatic diagnosis', 'going out detection', and enhanced user interface functionalities. We have evaluated the first and second phase monitoring systems from real field experiments of 3/4 months continuous operation with installation of 9/15 elders' houses, respectively. The experimental results show the promising possibilities to estimate the behavioral patterns and the current status of elder even though the simplicity of sensing capability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.229-232
• /
• 2008

A Neural network classification of human activity data is presented. The data acquisition system involves a tri-axial accelerometer in wireless sensor network environment. The wireless ad-hoc system has the advantage of small size, convenience for wearability and cost effectiveness. The system can further improve the range of user mobility with the inclusion of ad-hoc environment. The classification is based on the frequencies of the involved activities. The most significant Fast Fourier coefficients, of the acceleration of the body movement, are used for classification of the daily activities like, Rest walk and Run. A supervised learning approach is used. The work presents classification accuracy with the available fast batch training algorithms i.e. Levenberg-Marquardt and Resilient back propagation scheme is used for training and calculation of accuracy.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1722-1728
• /
• 2011

The security issue in urban transit system has been widely considered as the common matters after the fire accident at Daegu subway station. The safe urban transit system is highly demanded because of the vast number of daily passengers, and it is one of the most challenging projects. We introduced a test model for integrated security system for urban transit system and built it at a subway station to demonstrate its performance. This system consists of cameras, sensor network and central monitoring software. We described the smart camera functionality in more detail. The proposed smart camera includes the moving objects recognition module, video analytics, video encoder and server module that transmits video and audio information.

• Journal of Korea Multimedia Society
• /
• v.17 no.8
• /
• pp.1020-1024
• /
• 2014

The environment information such as dust, temperature, humidity, illumination and gas are very important in daily life. We implemented multi-sensor system which made for measuring an environment by using Arduino, ZigBee, and Appinventor. We also designed a packet for transmitting environment data. The data are sent to the server via ZigBee and then it communicates to a smart phone via WI-Fi. In this study, we added divers sensors, designed a protocol which made for transfer several kinds of data and improve mobility for real time monitoring by using smart phones. The system was worked well and the data was transmitted correctly to the smart phone.