• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.323-332
• /
• 1997

It was reported by some researchers that two-stage parallel-plate ESPs, commonly called electronic air cleaners, show decreasing behavior of collection efficiency as particle size decreases below about $0.03{\mu}m$. This phenomenon is attributed to partial particle charging characteristics, where some of incoming particles are not charged in the charging cell of 2-stage parallel-plate ESP. One way to improve the decreasing collection efficieny in that particle size range is to enforce particle charging quantity in the charging cell. In the present study, in order to do this a 2-wire series-type charging cell modified from a 1-wire normal-type one was suggested and investigated theoretically and experimentally concerning improvement of the collection efficiency. It was confirmed from the experimental and theoretical works that the collection efficiency was apparently improved.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.633-640
• /
• 2000

The effects of structure modification of the vortex finder on the collection efficiency and pressure drop have been investigated. The pressure drop in a cyclone having the two stage vortex finder is higher than that in a conventional cyclone and increases proportionally with the increase of square of gas inlet velocity in both cases. The pressure drop of both conventional cyclone of friction resistance at the boundary layer. The collection efficiency of fine dust has been enhanced by addition of vortex finder in a conventional cyclone and gas inlet velocity showing maximum dust removal efficiency increase to 17 m/s(1.7 times of saltation velocity). Optimum size of two stage vortex finder has been induced to 13 cm I.D$\times$2.6cm Length from the results of overall dust collection efficiency. Previous models were tested for the simulation of collection efficiency of cyclone having two stage vortex finder and the Dietz model predict the similar value with experimental results of the present study.

• Animal Bioscience
• /
• v.36 no.10
• /
• pp.1536-1545
• /
• 2023

Objective: The objective was to evaluate the effects of UV-B irradiated vitamin D-enriched yeast supplementation on milk yield, milk composition, vitamin D in milk, milk fatty acids, blood chemistry, and 25(OH)D status in dairy cows. Methods: Six Thai Friesian cows (milk production, 11.2±2.0 kg/d; body weight, 415.0±20.0 kg; and days in milk, 90.0±6.0) were allocated to each treatment in a 3×3 Latin square design, with three treatments and three periods. Each period of the Latin square lasted 49 days consisting of 14 days for diet adaptation and 35 days for sample collection. Dairy cows were randomly assigned to one of three treatments: i) feeding a basal diet without yeast (CON); ii) basal diet + 5 g of live yeast (75 IU/head/d of vitamin D₂; LY); and iii) basal diet + 5 g of UV-B irradiated vitamin D enriched yeast (150,000 IU/head/d of vitamin D₂; VDY). Feed intake and milk production were recorded daily, milk sample collection occurred on days 14 and 35 of each collection period, and blood plasma was collected on days 0, 7, 14, 21, 28, and 35 of each collection period. Results: The results show that after a trial period of 14 and 35 days, the VDY group had significantly higher vitamin D content in milk than the LY and CON groups (376.41 vs 305.15, 302.14 ng/L and 413.46 vs 306.76, 301.12 ng/L, respectively). At days 7, 14, 21, 28, and 35 of the experiment, cows fed the VDY group had significantly higher 25(OH)D₂ status in blood than the CON and LY groups (51.07 vs 47.16, 48.05 ng/mL; 54.96 vs 45.43, 46.91 ng/mL; 56.16 vs 46.87, 47.16 ng/mL; 60.67 vs 44.39, 46.17 ng/mL and 63.91 vs 45.88, 46.88 ng/mL), respectively. Conclusion: In conclusion, UV-B irradiated vitamin D-enriched yeast supplementation could improve vitamin D content in the milk and 25(OH)D status in dairy cows during the lactation period.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.803-806
• /
• 2020

The body shape measurement method using 3D images has been widely used due to the recent development of 3D measurement cameras and algorithms. Existing 3D imaging devices are expensive devices, and there is a limit to their universalization. Due to the recent spread of inexpensive 3D cameras and the development of various measurement methods, various possibilities are being shown. It is expected to have a great impact on the medical device market that requires accurate data collection. Various medical device products using artificial intelligence are emerging, and accurate data collection is the most important to develop accurate artificial intelligence algorithms. Collection equipment using 3D cameras is expected to act as a major factor in the development of artificial intelligence algorithms using 3D images.

• Transactions of Materials Processing
• /
• v.33 no.4
• /
• pp.270-276
• /
• 2024

In order to improve the performance of the PM (Particulate Matter) filter, the TPMS structure was used as a flow controller to control the flow entering the filter. Among various TPMS structures, a primitive structure that is easy to utilize 3D printing technique was selected and the effect of unit cell size was analyzed. In addition, numerical analysis was performed and swirl ratio was analyzed to confirm changes in filter inlet flow characteristics that affect changes in filter performance. Unit cell size is closely related to filter performance, and both PM collection efficiency and pressure drop increase as unit cell size decreases. Through quality factor (QF) comparison, which comprehensively evaluate collection efficiency and pressure drop, it was confirmed that when the unit cell size is 5 mm, PM collection efficiency increases, but the flow controller actually reduces filter performance. QF values are similar for unit cell sizes of 10 and 20 mm, and it is advantageous to select the unit cell size among these two considering collection efficiency and operating costs. The filter's collection performance increases due to the increase in swirl flow caused by the primitive structure, and the filter's collection efficiency increases due to the swirl flow that increases throughout the flow field as the unit cell size becomes smaller.

• Journal of Korean Library and Information Science Society
• /
• v.47 no.3
• /
• pp.241-259
• /
• 2016

This study attempts to investigate the current stage of collection development process in school libraries based on interviews with 20 teacher-librarians in school libraries. Library Collection is the primary element of a library and collection development is the starting point of librarians' duty. The researchers shed light on such issues as observed in collection development process in school libraries. Through the visits and observations such problems as aging book collections, lack of support of administrators, imbalance in subject distribution are identified.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.363-366
• /
• 2000

The sequences of the D1/D2 region of 26S rDNA from seven Sporobolomyces species, Bensingtonia subrosea, and Rhodosporicium toruloides were determined and compared with those from representatives of the genera Leucosporidium, Rhodosporidium, Rhodotorula, and Sporidiobolus. The five species of Sporobolomyces analyzed were distantly related to a monophyletic clade consisting of species of Sporidiobolaceae and Sporobolomycetaceae. Sporobolomyces falcatus was found to be closely related to Tremella exigua. The members of Sporidiobolaceae and Sporobolomycetaceae were divided into four groups. Group 1 was composed of Leucosporidium scottii and two Rhodotorula species, and group 2 contained three Rhodotorula species. Group 3 was designeate as the Sporobolomyces/Sporidiobolus core group, as it contained Sporidiobolus johnsonii, the type species of Sporidiobolus and the teleomorphic state of Sporobolomyces salmonicolor (the type species of Sporobolomyces). Group 4, named the Rhodotorula/Rhodosporidium core group, included Rhodosporidium toruloides and Rhodotorula glutinis, the type species of the genera Fhodosporidium and Rhodotorula, respectively. The four groups were differentiated on the basis of their physiological characteristics including the assimilation of D-glucosamine, glucuronate, 2-keto-gluconate, L-arabinitol, raffinose, methyl-$\alpha$-glucoside, and satrch. The taxonomy of the genera Leucosporidium, Rhodosporidium, Rhodotorula, Sporidiobolus, and Sporobolomyces will require a major revision when more data becomes available.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.11-24
• /
• 2020

This research examines pattern production of 3 men's costumes in the second half of 19th century by 3D reconstruction to reveal technical aspects of mail costumes. The steps are as follows. First, an examination of selective type according to research study. Second, a pattern analysis of 3 historical male tops of 19th century referred to 9 pattern books of the France National Library collection. Third, a categorized type analysis that referred to paintings of the Musée d'Orsay collection. Fourth, a measurement and structure research of 3 historical garments of Fashion and Textile Museum collection. Fifth, the pattern making and fitting by 3D simulation. Research discussed the following subjects and results. First, main type of men's coat can be categorized by frac, redingote, jaquette, and veston. Second, the male costume pattern contained in pattern books was researched along with distinguished silhouettes and structures; X silhouette for frac and redingote, H silhouette for jaquette, and straight box silhouette for veston. Third, based on the analysis of representative type of men's costume per period conducted previous studies, 2 redingotes and a jaquette in the museum were selected and compared to other data such as image materials. Last, the following process was conducted for reconstruction; 'Drawing diagram-Primary pattern drafting by measurement value-3D virtual fitting-Checking the fit-Modification and complement'. We also obtained a 3D virtual reconstruction and a 2D research pattern that suggested a costume pattern by each type along with 3D reconstruction that included insights for male coat techniques of 19th century France.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.942-945
• /
• 2005

This paper tried to analyze the collection and management method of shop-floor information for development of digital framework in u-manufacturing. In detail, the shop-floor information collection method through the direct communication with manufacturing devices using network Including RS-232C/422, field bus and ethernet is analyzed and proposed. In case the direct communication is impossible, the information collection method through additional sensors or data acquisition units is analyzed and proposed. Moreover, the collection method through bar code reader or touch screen of operators is analyzed and proposed to act up to machine to man/mobile/machine.

• Journal of the Korean Society for information Management
• /
• v.22 no.3 s.57
• /
• pp.103-127
• /
• 2005

The purpose of the study is to implement the management model of the institutional repositories for the efficient distribution infrastructure of national knowledge focusing on the dCollection system which is operated by KERIS (service provider). In order to build the management model, the two steps were utilized. The first step is to investigate the checklists of repositories that are important factors for the successful repository implementation through literature review. On the other hand, the second one is to survey the current status of the sixteen domestic and foreign institutional repositories through interviews, surveys and email as well as the repository home pages and literature reviews. Through the two steps, the management model including six components such as content and librarian role was proposed. The proposed management model will be utilized to supply guides both to the universities which plan to build their institutional repositories and to the universities which try to promote the activities of their repositories.