• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.341-351
• /
• 2021

Recently, user-driven privacy control technology, such as distributed ID management, has been gaining attention. However, the existing blockchain-based access control studies have not provided a sufficient level of privacy control method to users. This paper proposes a method that combines permissioned blockchain technology and a recent privacy control standard. To allow users to participate in privacy control, a token-based user access control service that conforms to the UMA2 standard was applied to the blockchain dApp. By combining the blockchain and UMA2, the proposed method provides a user-centered privacy control function that the existing blockchain could not provide. In addition, we solved the problem of privacy, security, and availability of entities, which are the disadvantages of UMA2.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.441-445
• /
• 2021

The components affecting the extrinsic transconductance (g_{m_ext}) in In_0.7Ga_0.3As quantum-well (QW) high-electron-mobility transistors (HEMTs) on an InP substrate were investigated. First, comprehensive modeling, which only requires physical parameters, was used to explain both the intrinsic transconductance (g_{m_int}) and the g_{m_ext} of the devices. Two types of In_0.7Ga_0.3As QW HEMT were fabricated with gate lengths ranging from 10 ㎛ to sub-100 nm. These measured results were correlated with the modeling to describe the device behavior using analytical expressions. To study the effects of the components affecting g_{m_int}, the proposed approach was extended to projection by changing the values of physical parameters, such as series resistances (R_S and R_D), apparent mobility (𝜇_{n_app}), and saturation velocity (𝜈_sat).

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.638-643
• /
• 1999

In this study we prepared 5 types of nutritional beverage base samples containing various ratios of soy protein isolate (SPI) and sodium caseinate as protein source. The rheological properties of each sample were measured and the results were as followes; Samples changed their rheological properties with the ratio of SPI. Samples represented newtonian property with low ratio of SPI, pseudoplastic property with the increment of SPI, and bingham pseudoplastic property with higher increment of SPI (80% as protein source). In this result we conjectured that the more was the SPI, the more was the formation of progel during heat treatment, which could be the reason of the rheological changes. In the test of the relationship between temperature and apparent viscosity, apparent viscosity of samples decreased along with the increment of temperature. In observing the relationship between time and apparent viscosity, we found sample, containing high ratio of SPI (80%), represented thixotropic property clearly with the hysteresis loop.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.620-625
• /
• 2001

This study was examined to investigate the time course behaviors of cell growth and sucrose consumption, and effects of various elicitors on ginsenoside production in batch suspension cultures of Panax ginseng Meyer. Suspended cells reached to the stationary phase at 12 days after innoculation. The maximum cell concentration was 14.7 g-DCW/L at 17 days. The highest cell growth rate was 0.59 g-DCW/L d. The sucrose used as a sole carbon source was hydrolysed to glucose and fructose in 4 days, then quickly utilized until the middle-log phase and consumpted completely at 16 days. Various elicitors were app1ied at 8 days from inoculation which is the middle-log phase. Among the elicitors tested, jasmonic acid was the most efficient to increase the ginseneside production, which was 1.5 times higher than control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1481-1487
• /
• 2014

Recently, with the popularization of smartphones, augmented reality has become even more familiar to the public as an application that can provide realistic images as a tool for location-based services. Therefore, as a location-based application for smartphones that is appropriate for the application of augmented reality technology, the study develops a golf information system. Golf is the sport for which we should exactly know the accurate shape or distance to the destinations or obstacles, so the sport is suitable for applying the augmented reality technology. Even though the sport of golf has constantly increasing population to play it with the popularization of it, presently released golf-related smartphone apps are established as 2D images or in GPS basis; thus, they lack a sense of realism unfortunately. Thereupon, this study develops a golf information system by modifying and complementing usefully Mixare, the open source for augmented reality, for the sport of golf into an augmented reality-based system that can provide various information according to the actual environment of the golf course and describes how to apply it actually to the golf course.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.328-332
• /
• 2019

Advances in web technology have enabled technical convergence in various system environments to be carried out through the web interface. The Web can be categorized from the Web 1.0 to the 4.0, depending on its role, it has the characteristics of connects information, connects people, connects knowledge, and connects intelligence. In addition, various technological needs occurred through the mobile app during the 4th Industrial Revolution, and functions such as 3D, virtual reality, augmented reality, video/audio processing were enabled on the web, which was a simple means of providing information. Technical standards have been studied to support these period needs. In this paper, I would like to mention one of the Web assembly. We will explore ways to link and fuse Web assembly with existing web systems (or platforms) and analyze their technical implications through a variety of examples. In addition, we will conduct a study on the architecture that can fuse the existing javascript with the web assembly, and discuss the future direction of the study.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.178-186
• /
• 2007

This study is attempted to correct an error of electronic blood pressure meter with an optical sensor. In general, for a hospitalized patient, ECG, blood pressure, oxygen saturation, and respiration are basically measured to monitor the patient's condition. Opening of a blood vessel after it is occluded by pressurizing the cuff influences the blood flow of peripheral blood vessels as well as oscillation changes in the cuff. Blood vessels are occluded and peripheral blood flow disappears at cuff pressure above the examinee's blood pressure, while blood vessels are opened and peripheral blood flow appears again at cuff pressure under the examinee's blood pressure. Then Disappear-Appear Point Length(DAPL) of peripheral blood flow can be judged with the signal of peripheral blood flow, thus is available as a factor of error correction for electronic blood pressure meter. Also, systolic or diastolic blood pressure can be corrected with Appear-Point-Pressure(APP) of cuff pressure at a point where blood flow occurs and Appear-Maximum Pressure(AMP) of cuff pressure at the maximum amplitude point of peripheral blood flow after peripheral blood flow appears again. For verification, 27 examinees were selected, and their blood value was obtained through experimental procedure of 4 stages including induction of blood pressure change. The examinees were divided into two groups of experimental group and control group, regression analysis was conducted for experimental group, and correction of a blood pressure error was verified with optical signal by applying the regression equation calculated in experimental group to control group. As an experimental result, mean of the whole measurement errors was 5mmHg or more, which did not meet the standard fur blood pressure meter. As a result of correcting blood pressure measurements with data of DAPL, APP, and AMP as drawn out of PPG signal, systolic blood pressure, mean blood pressure, and diastolic blood pressure were $-0.6{\pm}4.4mmHg,\;-1.0{\pm}3.9mmHg$ and $-1.3{\pm}5.4mmHg$, respectively, indicating that mean of the whole measurement errors was greatly improved, and standard deviation was decreased.

• Biomolecules & Therapeutics
• /
• v.21 no.2
• /
• pp.161-169
• /
• 2013

The objective of this study was to enhance the oral bioavailability (BA) of zanamivir (ZMR) by increasing its intestinal permeability using permeation enhancers (PE). Four different classes of PEs (Labrasol$^{(R)}$, sodium cholate, sodium caprate, hydroxypropyl ${\beta}$-cyclodextrin) were investigated for their ability to enhance the permeation of ZMR across Caco-2 cell monolayers. The flux and $P_{app}$ of ZMR in the presence of sodium caprate (SC) was significantly higher than other PEs in comparison to control, and was selected for further investigation. All concentrations of SC (10-200 mM) demonstrated enhanced flux of ZMR in comparison to control. The highest flux (13 folds higher than control) was achieved for the formulation with highest SC concentration (200 mM). The relative BA of ZMR formulation containing SC (PO-SC) in plasma at a dose of 10 mg/kg following oral administration in rats was 317.65% in comparison to control formulation (PO-C). Besides, the $AUC_{0-24\;h}$ of ZMR in the lungs following oral administration of PO-SC was $125.22{\pm}27.25$ ng hr $ml^{-1}$ with a $C_{max}$ of $156.00{\pm}24.00$ ng/ml reached at $0.50{\pm}0.00$ h. But, there was no ZMR detected in the lungs following administration of control formulation (PO-C). The findings of this study indicated that the oral formulation PO-SC containing ZMR and SC was able to enhance the BA of ZMR in plasma to an appropriate amount that would make ZMR available in lungs at a concentration higher (>10 ng/ml) than the $IC_{50}$ concentration of influenza virus (0.64-7.9 ng/ml) to exert its therapeutic effect.

• Journal of Information Technology Applications and Management
• /
• v.28 no.3
• /
• pp.59-75
• /
• 2021

This study aims to establish a foundation for autonomous driving on campus and communication of abundant university information in the HCI environment in a VR environment where college freshmen can freely travel around campus facilities. The purpose of this study is to develop a three-dimensional VR-style campus tour system to establish a media environment to provide abundant university information guidance services to freshmen in non-face-to-face situations. This study designed a three-dimensional virtual reality campus tour system to solve the problem of discontinuity in which VR360 filming space does not lead to space like reality, and to solve many problems of expertise in VR technology by constructing an integrated production environment of tour system. We aim to solve the problem of inefficiency, which requires a large amount of momentum in virtual space, by constructing a GUI that utilizes the motion of the field of view focus. The campus environment was designed as a three-dimensional virtual reality using a three-dimensional graphic design. In non-face-to-face situations, college freshmen freely transformed the HMD VR device, smartphone, FPS operation mode of the gyroscope sensor. The design elements of the three-dimensional virtual reality campus tour system were classified as ①Visualization of factual experiences, ②Continuity of space movement, ③Operation, automatic operation mode, ④Natural landscape animation, ⑤Animation according to wind direction, ⑥Actual space movement mode, ⑦Informatization of spatial understanding, ⑧GUI by experience environment, ⑨Text GUI by building, ⑩VR360, 3D360 Studio Environment, ⑪Three-dimensional virtual space coupling block module, ⑫3D360-3D Virtual Space Transmedia Zone, ⑬Transformable GUI(VR Device Dual Viewer-Gyro Sensor Full Viewer-FPS Operation Viewer) and an integrated production environment was established with each element. It is launched online (http://vautu.com/u1) by constructing a GUI for free driving mode and college information screens to adapt to college life for freshmen, and designing an environment that can be used simultaneously by current media such as PCs, Android, and iPads. Therefore, it conducted user research, held a development presentation, a forum on excellence in university innovation support projects, and applied it as a system on the website of a particular university. College freshmen will be able to experience university information directly from the web and app to the virtual reality campus environment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.141-153
• /
• 2016

The increase in frequency and scale of natural disasters is the typical negative examples of the global climate change and the change of the human living environment in cities. The damage caused by natural disasters in particular including human and physical damage is directly linked to the safety and properties of citizens. Besides, the damage may occur to SOC facilities directly or indirectly. The SOC facilities damaged by disasters cause infringement of citizens safety rights. Therefore, a plan to provide prompt and effective risk map information by linking a 3D disaster information display system, which handles the information of the damage that may occur to SOC facilities such as bridges, beams, and dams at the time of disasters, with an on-site assistance application is suggested in this study. The prompt provision of risk map information is defined as a dynamic expression technology in this study. Also, disaster information is processed and compressed with a module developed to be linked organically to a system that displays disaster information, a proliferation system that can use the information on site, and a DB system that constructs a relationship with the information. Based on the module, the effective disaster information compression plan will be prepared, and the prompt information transmission system will be secured in the future.