• 제목/요약/키워드: d/t ratio

검색결과 1,163건 처리시간 0.04초

남한 지진의 지속시간과 H/V 비율 (The Duration and H/V ratio of the Ground Motion in Southern Korea)

  • 최호선;박창업;조남대
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2002년도 춘계 학술발표회 논문집
    • /
    • pp.42-50
    • /
    • 2002
  • The duration and H/V ratio(the amplitude ratio of the horizontal to vertical components) of ground motions caused by earthquakes in southern Korea are analyzed. Total 329 seismograms of horizontal component recorded at hypocentral distances of 10 to 350 km from 27 earthquakes with local magnitude 2 to 4 are used for the analysis. Simplified relation between the duration of ground motion( $T_{d}$) and the ratio($\chi$) of Arias intensity( $I_{A}$) and squared maximum acceleration($\alpha$$_{max}$$^{2}$) is determined to be $T_{d}$ = 3.423$\chi$$^2$+ 8.200$\chi$ + 0.029, which is useful for the estimation of the duration in southern Korea. There are three distinct distance ranges with different linear variations of the duration in hypocentral distance. They are distance intervals of 10~80km, 80~140km, and the distance greater than 140km. The duration in southern Korea shows clear proportionality to the local magnitude at magnitudes greater than 3.1. The value 1.37 of the H/V ratio obtained in southern Korea is similar to the value 1.4 of ENA(Eastern North America). The H/V ratio in southern Korea increases in the frequency range from 0.3 to 10Hz. The duration and H/V ratio of ground motions derived in this study could be used in the stochastic simulation of strong ground motion.ion.n.n.

  • PDF

남강유역 지류·지천별 영향도 평가 (The Estimation of Contribution Ratio for Sub Stream in Nam River Basin)

  • 이재운;권헌각;곽인수;윤종수;천세억
    • 환경영향평가
    • /
    • 제21권5호
    • /
    • pp.745-755
    • /
    • 2012
  • The relations between tributaries and mainstream were identified with the water qualities measurements in the field. Parameters of water qualities were BOD, T-N, T-P and measurements were performed by 4 events of rainfalls for 2011. The precipitation data influenced on pollutants loads. Pollutants loads were fluctuations with the seasonal variation. Gajoacheon contributed in 18.39% of BOD, 23.79% of T-N, 15.23% of T-P and Nabulcheon contributed in 13.54% of BOD, 13.05% of T-N and 13.66% of T-P in the region from Nam River_C to Nam River_D. In case of the region from Nam River_C to Nam River_D, Yongacheon river inflowed to main stream as 23.65% of BOD, 20.74% of T-N, and 15.05% of T-P.

구성방법 및 평가차원 변화에 따른 개더스커트의 시각적 평가 (The Visual Evaluation of Gathered Skirts according to Different Gathering Conditions and Objects)

  • 이명희;정희경
    • 한국의류학회지
    • /
    • 제30권7호
    • /
    • pp.1034-1043
    • /
    • 2006
  • The purpose of this study was to investigate the difference of the visual evaluation about gathered skirts according to different gathering conditions and objects. The experiment is made of factorial design for three variables-fabric(cotton, wool, polyester), ratio of gathers(1.5T, 2.0T, 2.5T), objects(real thing, 2D digital picture, 3D shape). Questionnaire consists of 33 sematic differential scale expressing gathered skirts' image. The subjects were 50 male and female students majoring in clothing and textile. The data were analyzed by Frequency, Factor analysis, Anova, scheffe's test. The results obtained were summarized as follows; 1. As the open-ended response there were difference among the image according to different gathering conditions and obects. 2. The image of gathered skirts was composed of 6 factors; activities, attraction, attention, softness, moderateness, function. 3. For visual evaluation of gathering conditions as different objects, there were similar as softly in fabrics and lager in ratio of gathers. 4. For visual evaluation of different objects as gathering conditions, there was more difference effect of ratio of gathers than fabrics.

방사속도 및 공급률에 따른 PET 태세사(Thick & Thin yarn)의 특성 (Characterization of PET Thick & Thin Yarns on the Spinning Speed and Over Feed Ratio)

  • 박명수;신현세;정진수;손준식
    • 한국염색가공학회지
    • /
    • 제18권3호
    • /
    • pp.42-48
    • /
    • 2006
  • The aim of this work is to develop Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The manufacture of T-T yarns were carried out in a draw-winder using 85d/72f PET filament with various spinning speed of 2700, 2900, and 3100 m/min, respectively. The structure and physical properties of T-T yarns with spinning speed and over feed ratio were examined by draw-winder processing the sample in $100^{\circ}C$ water for 20 min and drying in 120, 140, 160, and $180^{\circ}C$ of dry air for 20 min. The crystallinity, the birefringence and the initial elasticity modulus of T-T yarns increased with increased spinning speed of filament and the heat treatment temperature but at the temperatures higher than $140^{\circ}C$ the increased rates show a tendency to decrease. Moreover, the initial modulus and the tenacity of T-T yarns increased with decreasing the over feed ratio of filament and the those of T-T yarns decreases with increasing the heat treatment temperature. The shrinkage of T-T yarns decreased with decreasing spinning speed and increased over feed ratio of filaments. Consequently, the results indicate that the best T-T yarn under 1 denier was optimized from PET filament with spinning speed of 2700 m/min and over feed ratio of 0.67

HD 기체에서의 수소 및 중수소 원자핵 스핀-격자 완화시간에 관한 핵자기공명 연구 (Proton and Deuteron Spin-Lattice Relaxation in Gaseous HD)

  • 유종훈
    • 한국자기학회지
    • /
    • 제4권1호
    • /
    • pp.52-55
    • /
    • 1994
  • HD 기체에 대하 수소 및 중수소 원자핵 스핀-격자 완화시간 $T_{1}(H)$$T_{1}(D)$가 측정되었다. 실험데이타는 온도 30 K < T < 313 K 및 압력 0.67 atm < P < 1.92 atm에서 측정되어졌다. 핵자기공명 주파수는 각각 수소원자핵에 대해서 358.012 MHz였고 중수소원자핵에 대해서는 54.958 MHz였다. 측정된 $T_{1}(H)$$T_{1}(D)$의 비로부터 분자스핀 연산자들인 $J_{z}$${3J_z}^{2}-J(J+1)$에 관련된 상관시간의 비 ${\tau}_{1}/{\tau}_{2}$의 값이 얻어졌다. J = 1 상태에서의 원자핵 스핀-격자 완화시간이 온도의 함수로서 $T^{0.25}$에 비례하는 것이 관측되었다.

  • PDF

MISO 전송 모드에서 Iterative Demapping and Decoding을 사용하는 DVB-T2 수신기의 성능분석 (Performance Evaluation of a DVB-T2 Receiver with Iterative Demapping and Decoding in MISO Transmission Mode)

  • 백종호;서정욱;강민구;전은성;김동구
    • 인터넷정보학회논문지
    • /
    • 제12권3호
    • /
    • pp.111-117
    • /
    • 2011
  • 본 논문은 차세대 유럽형 디지털 지상파 시스템으로 알려진 DVB-T2 시스템의 MISO(Multi Input Single Output)전송 모드에서의 BER (Bits Error Rate) 성능을 시뮬레이션을 통해 분석하였다. ETSI EN 302 755 표준에 따라 제작된 Full 시뮬레이터를 통해 실험을 수행하였으며, 수신기는 demapper가 LDPC 채널 디코더로부터 전달되는 a priori 정보를 이용하여 LLR(Log Likelihood Ratio) 값을 계산하는 IDD(Iterative Demapping and Decoder) 기술을 사용하였다. 시뮬레이션을 통해 16QAM, R=1/2(short 프페임)에서 IDD를 적용할 경우, BER=$10^{-4}$에서 2dB의 이득이 있음을 확인할 수 있었다. 또한 안테나 사이의 주파수 오프셋 영향으로 성능 열화가 발생함을 확인할 수 있었다.

경운기의 수리비계수(修理費係數) 산정(算定)에 관한 연구(硏究) (Estimation on the Coefficient of Repair & Maintenance Costs for Power Tiller)

  • 강창호;박남종;정두호
    • Journal of Biosystems Engineering
    • /
    • 제15권2호
    • /
    • pp.143-150
    • /
    • 1990
  • This study was conducted to estimate the ratio of Repair & Maintenance (R&M) costs to purchasing price that is one of the important factors for calculating the management costs of farm machinery. For this purpose, hour of use and R & M costs of power tiller and its attachments utilized results that were investigated with 400 sample units, 50 units by years of use from 1 to 8 years in 1988. The results obtained are summarized as follows; 1. The ratio of R & M costs per hours and annual R & M costs, accumulated R & M costs when sercice life of power tiller is 7 years were 0.017%, 5.50% and 38.52%, respectively. And in case of rotary, these ratio when its service life is 6 years were 0.072%, 7.16% and 43.0%, respectively. 2. The relationship between accumulated hours of use(t) and accumulated R & M costs(Y) of power tiller and its attachments were $Y=19.3t^{1.3}$ in power tiller, $Y=0.03t^{2.09}$ in plow, $Y=48.84t^{1.25}$ in rotary and $Y=7.45t^{1.15}$ in trailer. 3. The ratio of accumulated R & M costs to purchasing price when service life of power tiller is 7 years was 38.5%, and in case of rotary, this ratio when its service life is 6 years was 43.0%.

  • PDF

HSB600 원형강관 기둥의 거동에 대한 실험적 연구 (Experimental Study on the Behavior of Circular Steel Tube Columns using HSB600 Steel)

  • 김선희;최영환;최성모
    • 한국강구조학회 논문집
    • /
    • 제24권6호
    • /
    • pp.743-751
    • /
    • 2012
  • 본 논문은 HSB 강재를 보다 다양한 분야에 적용하기 위한 기본적인 연구로 HSB600 강재를 적용한 6개의 원형강관 기둥을 제작하여 구조적 특성을 고찰하고 현행 설계기준(KBC, Eurocode 3)의 적합성을 검토하였다. 실험의 주요변수는 세장비(KLe/r = 12, 14, 40, 65), 지름두께비(D/t = 25, 40), 편심비(e/D = 0, 0.5)이다. 실험결과를 현행 규준식과 비교한 결과 압축강도와 보-기둥 강도 모두 안전측으로 평가되어 현행 규준을 HSB600 강재에 적용할 수 있는 것으로 나타났다.

Effects of Fertilizer Treatment on the Growth Performance of 1-Year-Old Containerized Seedlings in Chionanthus retusus

  • Choi, Chung Ho
    • 한국자원식물학회지
    • /
    • 제33권6호
    • /
    • pp.586-596
    • /
    • 2020
  • Chionanthus retusus has been used for landscaping and gardening trees, foods and medicines. This study was carried out to analyze the effect of fertilization on the growth performance of container seedlings (1-year-old) in C. retusus. We used multifeed 19 (MF) as a fertilizer, and measured the height, root collar diameter (RCD), biomass, seedling quality index (SQI) chlorophyll contents and chlorophyll fluorescence of the seedlings. The findings of this paper showed that the height, RCD, H/D ratio, T/R ratio and the fresh and dry weight of seedlings increased after fertilization. The moisture content of the stem and root did not show any significant difference among fertilizations, except in the case of the leaf. Production distribution such as the dry weight ratio of leaves and the stem dry weight ratio of fertilized seedlings had a higher value than that of non-treatment. SQI was the highest in MF 1,000 mg/L and 2,000 mg/L treatment. Chlorophyll contents (SPAD value) also increased with the increase in fertilization concentrations. Chlorophyll fluorescence (Fv/Fm) showed the highest value of 0.8 in MF 2,000 mg/L treatment.

태양열의 성층축열과 주택이용에 관한 연구(성층축열) (Thermally Stratified Hot Water Storage)

  • 박이동
    • 태양에너지
    • /
    • 제10권3호
    • /
    • pp.3-12
    • /
    • 1990
  • 본 실험연구에서는 탱크의 직경에 대한 높이의 비(H/D)가 3이고 유입 유량이 8LPM, 유입수의 온도와 기존 저장수와의 온도차, ${\Delta}T=30^{\circ}C$일때, 운동량교환을 최소화하여 가장 좋은 성층을 얻었고 또한 실험에서 사용한 유입구(Inlet Port)의 경우 수정 Richardson수(Modified Richardson Number), Ri가 0.004(Q=10LPM, ${\Delta}T=30^{\circ}C$) 이하의 값에서는 완전 혼합(Fully Mixing)이 발생하고 H/D가 작아질수록 혼합층의 두께($H^*/H$)가 증가하여 성층 축열에는 바람직하지 못하였다. 그리고 성층은 성층을 촉진시키기 위하여 Distributor를 사용했을 때가, Distributor를 사용하지 않은 유입구(Inlet Port)의 경우 보다 잘 형성되어 저장효율이 Distributor를 사용한 경우(Q=8LPM, ${\Delta}T=30^{\circ}C$, H/D=3)에 Distributor를 사용하지 않은 유입구(Inlet Port)의 최저효율 63%(Q=12LPM, ${\Delta}T=30^{\circ}C$, H/D=3인 경우)보다는 31% 정도, 최대효율 84%(Q=8LPM, ${\Delta}T=30^{\circ}C$, H/D=3인 경우)보다는 11% 정도 높은 95%까지 저장 효율을 증가시킬 수 있었다. 더 나아가서 단면이 균일한 원형 Distributor(A=D=Constant)의 경우에, 유량이 8LPM인 경우에 관내의 압력차가 작아 부분혼합(Partial Mixing)이 감소하여 안정된 성층을 얻을 수 있었다. 그리고, Distributor의 직경을 다음식과 같이 $$\frac{D}{D_L}=(\frac{x}{L})^{1/2}(1+\frac{fL}{2D})-\frac{fx}{2D_L}$$ 길이에 대하여 변화시켜 Distributor를 제작함으로써, 보다 안정된 열성층과 높은 열저장 효율을 얻을 수 있을 것으로 예상한다.

  • PDF