• 대한치과의사협회지
• /
• 제16권12호통권115호
• /
• pp.935-940
• /
• 1978

The purpose of this study was to evaluate the marginal sealing ability of 'Hi-Pol' Enamel Bond system. Using freshly extracted human teeth and 2% acquous methylene blue, the marginal leakage of dye in restorative materials such as 'Hi-Pol' Enamel Bond system, Hi-Pol, Adaptic, Nuva system, Epolite and Amalgam were investigated at 37℃ and under temperature cycling in range of 4℃-60℃. the results as follows; 1. All filling materials showed some degree of marginal penetration by 2% methylene blue dye. 2. 'Hi-Pol' Enamel Bond system revealed the least marginal penetration by 2% methylene blue as Nuva did at 37℃, but under temperature cycling in range of 4℃-60℃ it showed the greatest marginal penetration. 3. Hi-Pol restoration showed a tendency the similar to the other composite restoration. 4. Nuva system had the most effective marginal sealing ability either at 37℃ and under temperature cycling.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.153.1-153
• /
• 2001

This paper describes a development of rehabilitation training system for the postural balance control. A new rehabilitation training system, designated as a virtual cycling system, was developed to improve postural balance control by combining virtual reality technology with an unfixed bicycle. In this experiment, 20 normal adults were tested to investigate the influencing parameters of postural balance control. In order to evaluate the usefulness and the training effects of the system, several parameters Including path deviation, cycling velocity, cycling time, center of pressure, and head movement were evaluated and analyzed quantitatively. Also, to improve the effect of balance training, the visual feedback information related to the subject´s weight shift was ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.181.6-181
• /
• 2001

This paper describes a development of rehabilitation training system for the postural balance control. A new rehabilitation training system, designated as a virtual cycling system, was developed to improve postural balance control by combining virtual reality technology with an unfixed bicycle. In this experiment, 20 normal adults were tested to investigate the influencing parameters of postural balance control. In order to evaluate the usefulness and the training effects of the system, several parameters including path deviation, cycling velocity, cycling time, center of pressure, and head movement were evaluated and analyzed quantitatively. Also, to improve the effect of balance training, the visual feedback information related to the subject's weight shift was assessed to identify whether it was useful. It could be also known ...

• 한국수소및신에너지학회논문집
• /
• 제12권3호
• /
• pp.177-189
• /
• 2001

T hydrogen absorption-desorption behavior induced by thermal or hydrogen pressure cycling in a closed system was observed in hydrogen storage alloys, $(La-R-Mm)Ni_{4.5}Fe_{0.5}$, $MmNi_4Fe_{0.85}Cu_{0.15}$ and $(Ce-F-Mm)Ni_{4.7}Al_{0.2}Fe_{0.1}$. Thereby (La-R-Mm), Mm and (Ce-F-Mm) refer to La-rich mischmetal, mischmetal and Ce-free mischmetal respectively. As the results, it is found that the alloy stabilities during thermal cycling varies with alloy composition change. The highest stability occurs in $MmNi_4Fe_{0.85}Cu_{0.15}$ and the lowest stability in $(La-R-Mm)Ni_{4.5}Fe_{0.5}$. Comparing hydrogen pressure cycling with thermal cycling, pressure cycling causes severer degradation of the alloy $(Ce-F-Mm)Ni_{4.7}Al_{0.2}Fe_{0.1}$ than thermal cycling. When the 1500 times-cycled alloy is annealed at $400^{\circ}C$ for 3hrs under 1 atm of hydrogen pressure the hydrogen storage capacity is recovered only partially but not completely to the initial capacity. The amount of capacity loss after annealing is larger in the hydrogen pressure cycled samples than in the thermal cycled, suggesting an incoming of impure gas during hydrogen pressure cycling.

• 패션비즈니스
• /
• 제26권5호
• /
• pp.91-104
• /
• 2022

In this study, a cycling smart wear for measuring cycling posture and motion was developed using a three-dimensional motion analysis camera and an IMU inertial sensor. Results were compared according to parts to derive the optimal smart device attachment location, enabling correct posture measurement and cycle motion analysis to design a pattern. Conclusions were as follows: 1) 'S-T8' > 'S-T10' > 'S-L4' was the most significant area for each lumbar spine using a 3D motion analysis system with representative posture change (90°, 60°, 30°) to derive incisions and size specifications; 2) the part with the smallest relative angle change among significant section reference points during pattern design was applied as a reference point for attaching a cycling smart device to secure detachable safety of the device. Optimal locations for attaching the cycling device were the "S-L4" hip bone (Sacrum) and lumbar spine No. 4 (Lumbar 4^th); 3) the most suitable sensor attachment location for monitoring knee induction-abduction was the anatomical location of the rectus femoris; 4) a cycling smart wear pattern was developed without incision in the part where the sensor and electrode passed. The wearing was confirmed with 3D CLO. This study aims to provide basic research on exercise analysis smart wear, to expand the smart cycling area that could only be realized with smart devices and smart watches attached to current cycles, and to provide an opportunity to commercialize it as cycling smart wear.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.369-376
• /
• 2022

In this study, the stability of an anion exchange membrane water electrolyzer (AEMWE) cell was evaluated in an on-off cycling operation with respect to an applied electric bias, i.e., a current density of 500 mA cm^-2, and an open circuit. The ohmic and polarization resistances of the system were monitored during operation (~800 h) using electrochemical impedance spectra. Specific consideration was given to the ohmic resistance of the cell, especially that of the membrane under on-off cycling conditions, by consistently feeding the cell with KOH solution. Owing to an excess feed solution, a momentary increase in the polarization resistance was observed immediately after the open-circuit. The excess feed solution was mostly recovered by subjecting the cell to the applied electric bias. Stability tests on the AEMWE cell under on-off cycling with continuous feeding even under an open circuit can guarantee long-term stability by avoiding an irreversible increase in ohmic and polarization resistances.

• 한국의류학회지
• /
• 제44권6호
• /
• pp.1139-1153
• /
• 2020

Upper body types were classified to develop the sizing system of the cycling wear top for the high school male cyclist. The research methods were performed using the anthropometric measurements of 111 high school male cyclists that included cluster analysis was performed. The research results are as follows. Type 1 (23.4%) has the longest biocromion length, is the tallest of the three types and a proper body type. Type 2 (25.2%) has the largest weight and developed muscles in the chest parts. Type 3 (51.4%) is the shortest of the three types and is a skinny body with a bending back. In order to develop a sizing system, the 12 anthropometric measurements were selected for correlation analysis. The bust circumference and stature were presented as the control dimensions of sizing system. The waist front, waist back length and biacromion length were less correlated with other items; consequently, they were independent items and were set as referable dimensions. Therefore, it was proposed as a sizing system because the 5 cm of bust and 5 cm of stature have a high coverage by body type. The total coverage rate was 81.9%.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.634-640
• /
• 2011

The effect of cycling on the absorption and desorption characteristics of the 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm system was investigated. The material was made by Hydrogen Combustion Synthesis. The cycling experiment was performed at 298 K, 30 atm for 15 min. During the reaction time, the amount of absorption was fully desorbed. After the full activation, the hydrogen storage capacity was 1.57 wt% and the capacity was maintained until 50 cycles. And the reaction rate does not change with an increase in the number of cycles. This material has good durability and reversible feature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1415-1416
• /
• 2013

• 한국유기농업학회지
• /
• 제24권4호
• /
• pp.665-680
• /
• 2016

Theoretically, it is said that economies of scope can be realized in the cropelivestock cycling organic farming. Thus, it is also used as the principle of organic farming. However, it is difficult to find the cases of the empirical analysis of it in Korea. In that sense, this study is meaningful in that it analyzed the agricultural data of case farms of obtaining the approval of both organic agricultural products and organic animal products and practicing cycling farming for 4 years and tested the hypothesis. This study measured economies of scope by using the actual measurement value and estimation value farming performance statistics for 4 years of case farms. This farmhouse conducted nutrient cycling in the farm like self-manufacturing and injecting organic agricultural byproduct and wild grass as organic livestock feed and fermenting organic livestock manure to organic compost to return it 100%. The results can be summarized as follows: According to the result of cycling farming of combining and producing organic agriculture and organic livestock, economies of scope were found to be realized in this case farmhouse. That is, although not strong, EOS>0, there were economies of scope. The measurement value appeared as 0.0722, 0.00378, 0.04667 and 0.13127 in 2012, 2013, 2014 and 2015, respectively. It was improved as time passes and the scale gets smaller. Therefore, in order to further improve economies of scope, there should be measures of reducing duplication costs between agriculture-livestock as low as possible and lowering the production cost of organic feed. That is, there is a need for the management strategy to adjust the import function and cost function according to the change in management paradigm and cropping system.