• 한국통신학회논문지
• /
• 제34권5A호
• /
• pp.347-354
• /
• 2009

In this paper, we propose a new transmit diversity technique for multiple-input multiple-output (MIMO) systems to improve the link level performance of open-loop systems. By cyclically applying a predetermined set of preceding weight vectors, artificially induced fluctuation is created to achieve additional diversity gain in flat fading channels. To design the set of the precoding vectors, we exploit the knowledge on the distribution of near optimum Preceding vectors observed in a beamforming scheme based on the rotation transformations. Simulation results demonstrate that the proposed open-loop diversity scheme with an arbitrary number of transmit antennas achieves a full diversity gain with computational complexity comparable to a single-input single-output (SISO) system.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.223-229
• /
• 2002

Spark plug ionization signal could be useful in an internal combustion engine as a feedback signal for combustion diagnostics such as misfire detection, knocking detection and lambda control, but the signal has high level of cyclic fluctuation in an internal combustion engine due to residual gas, pressure, temperature, mixture composition in the spark gap. Because of this reason it is very difficult to apply ion signal to commercial engine control. In this Study, a correlation between A/F and spark plug ionization signal was studied in a constant volume chamber. Constant volume chamber with gas phase fuel(Propane) has homogeneous fuel composition , no mixture flow, same pressure and temperature on each test. The results show that mean chemi-ion signal has the highest correlation with A/F and intial pressure change has on effect on the thermal-ion signal and not on chemi-ion signal.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.224-228
• /
• 1997

2종류의 질화규소에 대하여 Ring형시험편을 이용하여 접촉피로시험을 하였다. 질화규소는 금속재료에서와 같은 형태의 피로현상을 나타냈고, 파면해석 및 관찰결과 접촉피로에 있어서 균열의 발생은 고탄소크롬강의 경우와 같이 표면하의 반복전단응력에 의한 것으로 밝혀졌다. 그리고 시험펴 파단면에서 표면하의 Heltz전단응력의 변동이 최대로 되는 깊이의 위치에 다수의 균열이 관찰되었다.

• 천문학회지
• /
• 제56권1호
• /
• pp.125-135
• /
• 2023

Here, we investigated the observed sunspot areas with respect to latitudes using the Hilbert transform technique. Conventional study of the cyclic patterns of sunspots is based on the Lomb-Scargle periodogram, which only obtains the amplitude information. In comparison, our approach characterizes the amplitude as well as the phase of solar activity. We demonstrated the solar North-South asymmetry in the instantaneous amplitude by analyzing daily sunspot data set spanning from the solar cycles 11 to 24. Our findings confirm that the northern hemisphere is dominant in the solar cycles 14, 15, 16, 18, and 20. Unlike the amplitude, the North-South asymmetry in the period of solar activity could not be established. We have also found that the standard deviation as a measure of fluctuation in the phase derivative is minimum in the latitude band 10° < l < 20°, and the fluctuations obtained for latitudes above 30° are considerable.

• 한국환경과학회지
• /
• 제21권12호
• /
• pp.1425-1433
• /
• 2012

Water temperature in the eastern part of the Yellow Sea (EYS) during winter (JFM) and summer (JJA) from 1964 to 2009 and Siberian High Pressure Index (SHI) and Arctic Oscillation index (AOI) during winter (JFM) from 1950 to 2011 were used to analyze long-term variation in oceanic and atmospheric conditions and relationship between winter and summer bottom water temperature. Winter water temperature at 0, 30 and 50 m had fluctuated highly till the late of 1980s, but after this it was relatively stable. The long-term trends in winter water temperature at both depths were separated with cold regime and warm regime on the basis of the late 1980s. Winter water temperature at 0m and 50m during warm regime increased about $0.9^{\circ}C$ and $1.1^{\circ}C$ respectively compared to that during cold regime. Fluctuation pattern in winter water temperature matched well with SHI and AOI The SHI had negative correlation with water temperature at 0 m (r=-0.51) and 50 m (r=-0.58). On the other hand, the AO had positive correlation with Winter water temperature at 0 m (r=0.34) and 50 m (r=0.45). Cyclic fluctuation pattern of winter water temperature had a relation with SHI and AO, in particular two to six-year periodicity were dominant from the early of the 1970s to the early of the 1980s. Before the late of 1980s, change pattern in winter water temperature at 0 and 50 m was similar with that in the bottom water temperature during summer, but after this, relationship between two variables was low.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권2호
• /
• pp.45-55
• /
• 2006

강변여과수 취수 방식의 도입이 고려되었던 경상북도 고령군 낙동강변의 충적대수층을 대상으로 2차원 지하수 유동모사를 수행하여, 취수정 및 주변 대수층에서의 지하수위와 하천수 유입량의 계절적 변화를 분석하였다. 개념모델의 하천 경계조건은 연평균 하천수위를 고정 수두로 설정하는 경우와 실제 관측된 시계열 자료를 이용하여 변동 수두로 설정하는 경우로 구분하여 모사를 수행하였다. 모사 결과 산정된 하천수 유입 비율은 고정하천수두 모사의 경우 연중 $74.3{\sim}87.0%$의 범위를 보이며 연평균 82.4%인 반면, 변동하천수두 모사의 경우 $52.7{\sim}98.1%$, 연평균 78.5%로 나타났다. 따라서 시기별로 변동하는 하천수위가 하천수 유입 비율에 큰 영향을 미치며, 하천수 유입 비율을 정확하게 산정하기 위해서는 변동하천수두 조건을 이용해야 하는 것으로 해석된다. 강변으로부터 취수정까지의 이격거리를 변화시키면서 모사를 반복 수행한 결과 취수정 이격거리가 커질수록 하천수 혼합 비율은 다소 감소하지만 그 영향이 수 % 정도로 매우 작게 나타났다. 강변여과 취수 시 지하수위 및 하천수 혼합비율에 영향을 미치는 인자인 대수층의 수리전도도 및 저유계수, 지하수 함양량, 취수량 등에 대한 민감도 분석을 수행하였다. 대수층의 평균 지하수위와 하천수 유입 비율은 취수량과 지하수 함양량 변화에 민감한 반면, 취수정의 지하수위는 수리전도도와 취수량에 민감한 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1219-1226
• /
• 2000

An efficient method is developed for plunger thermal cycle analysis in repeated forming process of the TV glass. The plunger undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state having same temperature history at every cycle. Straightforward analysis of this problem brings about more than 80 cycles to get reasonable solution, and yet hard to setup stopping criteria due to extremely slow convergence. An exponential fitting method is proposed to overcome the difficulty, which finds exponential function to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the fitted value at infinite time. Numerical implementation shows that it reduces the number of cycles dramatically to only 6-18 cycles to reach convergence within 10 accuracy. A system for the analysis is constructed, in which the thermal analysis is performed by commercial software ANSYS, and the fitting of the result is done by IMSL library. From the parametric studies, one reveals some important facts that although the plunger cooling or the glass thickness is increased, its counter part in contact is not much affected, duo to the low thermal conductance of the glass.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.192-198
• /
• 2000

Three dimensional thermal cycle analysis of the plunger is carried out in repeated forming process of the TV glass, which is continued work of two dimensional analysis where an efficient method has been proposed. The plunger undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state having same temperature history at every cycle. Straightforward analysis of this problem brings about more than 90 cycles to get reasonable solution. An exponential function fitting method is proposed, which finds exponential function to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the fitted value at infinite time. Number of cases are analyzed using the proposed method and compared to the result of straightforward repetition, from which one finds that the method always reaches nearly convergent solution within $9{\sim}12$ cycles, but turns around afterwards without further convergence. Two step use is found most efficient, in which the exponential fitting is carried out fer the first 12 cycles, followed by simple repetition, which shows fast convergence expending only 6 additional cycles to get the accuracy within 2 error. This reduces the computation cycle remarkably from 90 to 18, which is 80% reduction. From the parametric studies, one reveals that the overall thermal behavior of the plunger in terms of cooling parameters and time is similar to that of 2 dimensional analysis.

• 자원환경지질
• /
• 제39권5호
• /
• pp.537-554
• /
• 2006

유성지구 지열수의 산출 특성 및 수리적 연결성을 파악하기 위하여 2002년 3월부터 2005년 6월까지 장기 수위 관측을 실시하였다. 관측된 수위 자료를 이용하여 수위변동 주기 분석을 실시한 결과, 대부분의 관측공에서 0.5일, 1일, 7일 주기성이 확인되었다. 7일 주기성은 온천지대에서의 독특한 양수 행태로 인해 발생되는 인위적 현상으로서, 연구 지역내 관측공들의 수리적 연결성이 양호한 것을 반영하였다. 수위 영향 관계를 분석한 결과, E-W 방향성과 N-S 방향성의 지질구조가 지열수 저류체의 발달 및 지열수 유동에 중요한 규제 요소로 작용되고 있음이 확인되었다. 전반적으로 지열수의 열원과 대수층의 수리적 연결성과는 상호 연관성이 있을 것으로 해석된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.314-318
• /
• 2006

연소파를 이용한 로켓 점화장치 등에의 응용으로 관내에서 전파되는 데토네이션에 대한 관심이 증대되고 있으나 그 특성에 관하여 알려진 바는 많지 않다. 본 실험적 연구에서는 프로판-산소 혼합기로 채워진 직경 5mm, 길이 30m의 투명한 관을 이용하여 데토네이션 파의 진행을 고속촬영을 통하여 가시화하였다. 평균 속도를 측정한 결과, 압력이 감소함에 따라 정상적인 Chapman-Jouguet(CJ) 모드에서 약 $0.5V_{CJ}$에 이르는 저속 모드로 평균 속도가 감소하는 천이 영역이 존재한다. 관 길이 전체에 걸쳐 데토네이션 전파의 동적 특성을 관찰한 결과, 천이 영역에서는 데토네이션이 매우 불안정하여 주기적이거나 간헐적인 속도의 출렁임이 발생한다.