• Korean journal of food and cookery science
• /
• v.26 no.1
• /
• pp.62-71
• /
• 2010

The followings describes the result of making doenjang with added licorice (Glycyrrhiza uralensis) powder. and investigating its sensory characteristics and physicochemical quality. General preference was high at 20% salinity and 2% licorice (LD204), and 16% salinity and 2% licorice (LD162). The moisture content was unchanged in the control group, while it was reduced in LD204 and LD162 in the first week of fermentation, but showed little change after then. pHs were all in the range 5.90~5.97 on day 0, but decreased from 5.90 to 5.72 in the control group in the fifth week. LD204 changed from 5.95 on day 0to 5.42 in the first week, and then it gradually increased again and became 5.93 in the fifth week, which was similar to that of day 0. LD162 was 5.97 on day 0 and showed cyclic slight increases and decreases in the first week. It increased to 6.32 in the fifth week, which was higher than that of day 0 that is, its pH was higher than that of LD204. The acidity showed a difference right after it was made. In the control group, lactic acid content gradually increased from 0.16% on day 0 to the highest, 0.59%, in the fourth week. It slightly decreased in the fifth week. LD204 slowly increased from 0.25% on day 0 to a maximum, 0.50%, in the fourth week. It also slightly decreased in the fifth week, quite similarly to that of the control group. LD162, gradually increased from 0.22% on day 0 to the highest, 0.49, in the third week, and decreased after the fourth week. Salinity was 29.5%, 22.0%, and 18% in each of the control group, LD204, and LD162 on day 0 but increased to 34.0%, 29.0%, and 26.0% in the fifth week. Soluble solid was $32^{\circ}Brix$, $28^{\circ}Brix$, and $26^{\circ}Brix$ in each of the control group, LD204, and LD162 on day 0, but slightly increased to $40^{\circ}Brix$, $32^{\circ}Brix$, and $30^{\circ}Brix$ on the fifth day. It is thought that because of the sweetness of licorice, the higher-salinity doenjang earned a higher sensory test score than that of traditional doenjang. If its salinity is lowered a little, it could be used as a sauce, even possibly having medical effects as well.

• Journal of the Korean earth science society
• /
• v.28 no.4
• /
• pp.478-490
• /
• 2007

With groundwater data of seawater intrusion monitoring network in coastal areas of Korea's main land, we analyzed types of seawater intrusion through the coastal aquifer. The data including groundwater level, temperature and electrical conductivity obtained from 45 monitoring wells at 25 watershed regions were evaluated. Based on statistical analysis, correlation analysis and variation type analysis, groundwater levels were mainly affected by rainfall and artificial pumping. About 78% of the monitoring wells showed average temperature higher than $15^{\circ}C$ and about 58% of them showed minimum variations less than $0.2^{\circ}C$. Electrical conductivities showed a large magnitude of variation and irregular characteristics compared with groundwater levels and temperatures. Average electrical conductivities lower than $2,000\;{\mu}S/cm$ were observed at 28 monitoring wells while those of higher than $10,000\;{\mu}S/cm$ were done at 9 monitoring wells. From the cross-correlation analysis, groundwater levels were mostly affected by precipitation while temperature and electrical conductivity showed very low correlation. Meanwhile tidal variations strongly affected the groundwater levels comparing to precipitation. We classified the long-term monitoring data according to variation types such as constant process, linear trend, cyclic variation, impulse, step function and ramp. Impulse type was dominant for variations of groundwater level, which was largely affected by rainfall or artificial pumping, the constant process was dominant for temperature. Compared with groundwater level and temperature, electrical conductivities showed various types like linear trend, step function and ramp. According to the discrepancy of variation characteristics for monitoring data at each well in the same region, periodical analysis of monitoring data is essentially required.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.347-352
• /
• 1998

A study was carried out on the elelctrochemical characteristics of chemically modified electrodes (CMEs) by cyclic voltammetry. Fabrication of CMEs was made by coating with mixed valence (mv) inorganic-metal polymeric films on the glassy carbon electrode surface by potential cycling. Anodic oxidation behavior of methanol and L-ascorbic acid was studied by using CMEs working electrode. Deposition of films such as mv ruthenium oxo/ruthenium cyanide film (mv Ru-O/CN-Ru), mv ruthenium oxo/ferrocyanide film (mv Ru-O/$Fe(CN)_6$), and mv ruthenium oxo/ruthenium cyanide/Rhodium film (mv Ru-O/CN-Ru/Rh) was obtained to coat by scan rate of 50 mV/sec within the specified potential range (-0.5V ~ +1.2V). Film thickness was controlled by the repeat of the potential cycling. Anodic oxidation behavior of methanol was as follow. Calibration graph by using mv Ru-O/CN-Ru film showed linearly from 10 mM to 80 mM MeOH with slope factor of $-7.552{\mu}A/cm^2$. Although slope factor by using mv Ru-O/$Fe(CN)_6$ film was $-5.13{\mu}A/cm^2$, yet linear range of calibration graph could be extended from 10 mM to 100 mM MeOH. Anodic oxidation behavior of L-ascorbic acid was studied by mv Ru-O/CN-Ru film on the glassy carbon electrode and the glassy carbon electrode with Rh film, Glassy carbon electrode modified with Ru polymeric film was showed better sensitivity than the Rh-glassy carbon modified electrode (mv Ru-O/CN-Ru/Rh). Calibration graph was linear from 0.1 mM to 5 mM L-ascorbic acid by using glassy carbon electrode modified with Ru polymeric film. Solpe factor and relative coefficient are $-84.78{\mu}A/mM$ and 0.998, respectively.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.1
• /
• pp.16-23
• /
• 2004

Purpose: In this study, we tried to evaluate the clinical characteristics or circumstances that lead to unintentionally the delay in the diagnosis of intussusception or to the wrong direction that prevent the proper management early. Methods: All the patients of intussusception with delayed diagnosis in the department of pediatrics or emergency room at Gyeongsang National University Hospital from 1990 to 2003 were enrolled and reviewed retrospectively. Results: There were 8 boys and 6 girls and their median age was 8 months (range 2 months to 10 years). Their initial symptoms and signs were vomiting, seizure, diarrhea, lethargy, irritability, bloody stool, palpable abdominal mass, foul odor of urine and tachycardia. Clinical diagnosis or impressions at admission consisted of acute gastroenteritis, shigellosis and toxic encephalopathy, convulsive disorders, urinary tract infections, sepsis, abdominal mass and intestinal obstruction. Eight patients were luckily diagnosed due to the delayed manifestations of cyclic irritability or currant jelly stool. Six patients were not paid attentions for the possibilities of intussusception and diagnosed serendipitiously by the abdominal sonography or CT during the evaluation of the abdominal mass or distension. Only five of 14 cases (35.7%) were successfully managed by barium or air reductions. The other 9 cases needed surgical operations. Conclusion: Delayed diagnosis of intussusception arise when doctors initially diagnose the patients incorrectly due to the unusual presentations or when they overlook the newly arising symptoms or signs suggestive intussusception after the admission because they are ardently attached to the first impressions or initial clinical diagnosis.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.146-152
• /
• 2005

The activated carbon was produced from Sancheong bamboo by carbon dioxide gas activation methods. The carbonization of raw material was conducted at $900^{\circ}C$, and $CO_2$ activation reactions were conducted under various conditions: activation temperatures of $750-900^{\circ}C$, flow rates of carbon dioxide $5-30cm^3/g-char{\cdot}min$, and activation time of 2-5 h. The yield, adsorption capacity of iodine and methylene blue, specific surface area and pore size distribution of the prepared activated carbons were measured. The adsorption capacity of iodine (680.8-1450.1 mg/g) and methylene blue (23.5-220 mg/g) increased with increasing activation temperature and activation time. The adsorption capacity of iodine and methylene blue increased with the $CO_2$ gas quantity in the range of $5-18.9cm^3/g-char{\cdot}min$. But those decreased over those range due to the pore shrinkage. The specific volume of the mesopore and macropore of bamboo activated carbon were $0.65-0.91cm^3/g$. Because of this large specific volume, it can be used to the biological activated carbon process. Bamboo activated carbon phisically adsorbed the $CO_2$ of maximum 106 mg/g-A.C in the condition of 90% $CO_2$ and adsorption temperature of $20^{\circ}C$. The $CO_2$ adsorption ability of bamboo activated carbon was not changed in the 5 cyclic test of desorption and adsorption.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2014

In this research, we evaluated the performance and characteristics of carbon supported PtM (M = Ni and Y) alloy catalysts (PtM/Cs) synthesized by a modified polyol method. With the PtM/Cs employed as a catalyst for the oxygen reduction reaction (ORR) of cathodes in proton exchange membrane fuel cells (PEMFCs), their catalytic and ORR activities and electrical performance were investigated and compared with those of commercial Pt/C. Their particle sizes, particle distributions and electrochemically active surface areas (EAS) were measured by TEM and cyclic voltammetry (CV), while their ORR activity and electrical performance were explored using linear sweeping voltammetries with rotating disk electrodes and rotating ring-disk electrodes as well as PEMFC single cell tests. TEM and CV measurements show that PtM/Cs have the compatible particle size and EAS with Pt/C. When it comes to ORR activity, PtM/C showed the equivalent or better half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production(%) to or than commerical Pt/C. Based on results gained by the three electrode tests, when the PEMFC single cell tests were carried out, the current density measured at 0.6 V and maximum power density of PEMFC single cell adopting PtM/C catalysts were better than those adopting Pt/C catalyst. It is therefore concluded that PtM/C catalysts synthesized by modified polyol can result in the equivalent or better ORR catalytic capability and PEMFC performance to or than commercial Pt/C catalyst.