• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.109-116
• /
• 2003

The amount of radioactive waste is expected to be increased continuously because of the rapid growth of the domestic nuclear industry, full power operation of the HANARO reactor and the increased research activities of the nuclear fuel cycle. Accordingly the efforts are focused to achieve the handling of radioactive waste in safe and reduce the volume of radioactive waste. The PIEF is carrying out the PIE (post irradiation examination) of spent fuel rods related to the identification of cause defect and evaluation of integration safety. This study describes the technologies and experiences of compaction, shredding and cutting of the solid radioactive waste used in the PIE. The quantity of the high level waste was reduced by 1/12 using the 100-ton compressor installed in hot-cell. Also middle and low level waste was reduced by 1/8 using the 60-ton compressor installed in intervention area. Plastic drums were shredded by crusher to be compacted in the ratio of 1/5, used filters in the ratio of 1/6 and the number of drum is also reduced by cutting procedure for the non-volatile materials such as metal.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.147-153
• /
• 2017

The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.1
• /
• pp.15-21
• /
• 2004

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 5, 10, 15, 20, 25 and 30%. The objectives of this paper is to evaluate the fracture phenomenon of the tungsten carbide tool and the variation of surface integrity of the manufactured machinable ceramics under various cutting conditions during end mill machining With CNC machining center.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.320-325
• /
• 2008

The recent industrial application requires technical methods to get the cutting fluid droplet surfaces in particular from the viewpoint of topography and micro texture. To characterize the surface topography of droplet, the combination of the confocal laser scanning microscope (CLSM) and wavelet filtering is well suited for obtaining the droplet geometry encountered in tribological research. This technique indicates a better agreement in obtaining an appropriate droplet surface obtained by the CLSM over a detail range of surface accuracy (resolution: $2{\mu}m$). And the results allow an excellent accuracy in a measurement of a droplet surface. The combination of extended focal depth measurement configured and multi-scale wavelet filtering has proven that it can construct a droplet surface in a successive and accurate way. A multi-scale approach of wavelet filtering was developed based on the decomposition and reconstruction of droplet surface by 2D wavelet transform using db9 (a mother wavelet of daubechies). Also this technique can be extended to characterize the quantification of droplet properties and other field in a wide range of scales. Finally this method is verified to be a better droplet surface modeling in a micro scale arising in a mist machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.529-530
• /
• 2006

Manufacturing industry is changing rapidly. Prototyping with rapid manufacturing is a part of every business in many companies and prototypes are used efficiently as a part of the production development process. Sheet metal forming has traditionally been a technology area where prototyping has been extremely expensive and efficient options for low volume have been limited. This paper describes the process for incremental sheet forming technologies to make the prototype for a brake dust shield of vehicles, which includes the remodeling method to make a base mold and tool path for sheet metal forming and 5-axes laser cutting machine to trim the prototype product.

• International Journal of CAD/CAM
• /
• v.11 no.1
• /
• pp.18-26
• /
• 2011

This paper proposes a new solid-shape modeling system based on a lusterware-image illustration. The proposed method reconstructs a three dimensional solid shape from a set of rough sketches that are typically drawn in the early stages of the design process. The sketches do not have to be strictly accurate, and this tolerance to the roughness of the input sketches is one of the major advantages of the proposed method. The proposed system creates an initial shape based on the silhouette of the input lusterware-images. Then the user can edit the initial shape with intuitive cutting and dishing-up operations, which are based on sketching user interface. To achieve the goal, the system retains the geometric model with two representations: a point-set data and a volume data. This dual data structure allows the program to create an initial shape from the input images with little computational cost, and the user can apply cutting and dishing-up operations without substantially increasing computational and memory requirements. In this research, we have tested the proposed system by reconstructing solid models of some mechanical parts from rough sketches. The experimental results indicate that the proposed method is useful for the prototyping of a solid shape.

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.390-396
• /
• 1987

The model and its example were provided to predict wood production for a district forest planning. The method of Gentan probability is widely accepted for the prediction of wood production. The suggested model is different in the decision of cutting age distribution from that of Prof. Suzuki; the former can use either Weibull distribution or Gamma distribution, but the latter is possible only by Gamma distribution. This developed system can be used not only for establishing a district forest planning, but also for providing forest management information, such as periodic harvest volume, growing stock, labor requirement, and so forth.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.57-65
• /
• 2021

With the increased utilization of CAM programs, end-mill processing is most commonly used for machining and metal processing. In particular, hole or shaft machining has high assembly precision, which inevitably leads to high utilization of end mills. However, the analysis of quality characteristics according to the process conditions of end mills is not performed systematically at the site, causing poor quality and productivity. The most influential factor of quality is the runout of the end mill. In this paper, the number of turns of the end mill, number of tool blades, cutting direction, and artificial runout volume were determined to identify the correlation between the epicenter, cylindricality, and surface roughness. Two types of end mills, three levels of runout, three levels of rotational speed, and two cutting directions were considered and 36 rounds of hole processing were conducted. For the analysis of shape characteristics according to the set process variables, the experimental planning method was applied to the measured specimen and the processing characteristics were analyzed according to the runout of the end mill through correlation analysis.

• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.317-323
• /
• 2007

Almost all the people, particularly the rural people are directly dependent on the continued productivity of natural resources, like water, soils, forests and fisheries. But the overuse by the extremely high population pressures has degraded the natural resources into severe widespread deforestation. The degradation of natural resources, particularly the plant resources has been a great concern for socio-economic and sustainable development of the country. The Forests in Bangladesh have been depleted and degraded in volume, area, and quantity, thus requiring urgent forest protection by identifying the causes of forest loss. There are so many causes of deforestation and loss of genetic resources such as; the timber industry, which, legal or not, are cutting too many trees; indigenous forest dwellers, having their own types of problems; migrants, who, because of problems in their places of origin, have decided to move to the forests and the government through its Forest Department which is not able or willing to implement suitable policies to regulate the cutting trees and to prevent illegal cutting. Because it is a time consuming task to mitigate the first and second sets of factors, we recommend involving forest dwellers in forestry practices as much as possible and taking necessary steps to alleviate the third and fourth sets and thereby reduce the rate of forest depletion. Accordingly, a number of strategies that should be adopted to halt the loss of remaining forest cover are discussed.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.424-429
• /
• 1996

In an attempt to evaluate the effect of six starch sources-potato starch acetate, corn starch acetate, waxy corn starch, corn starch, potato starch, and wheat starch on properties of frozen noodle, amylograph characteristics of starch-wheat flour composites, cooking quality, maximum cutting force and sensory properties of cooked frozen noodles were examined. Compared with 100% wheat flour as control, potato starch acetate and potato starch-wheat flour composites had slightly lower initial pasting temperature and wheat flour composites with acetylated starches, waxy corn starch and potato starch had slightly higher maximum peak viscosity. At cooking quality examination of noodles made from wheat flour-starch composites, volume and weight of cooked noodles were increased and cook loss was decreased with the addition of acetylated starches and waxy corn starch. Maximum cutting forces of cooked frozen noodles containing more than 15% of potato starch acetate and only 15% of corn starch acetate were higher than that of control. Other starches except potato starch improved sensory properties of cooked frozen noodles and the greatest positive effect was acetated potato starch.