• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.427-435
• /
• 1984

Alfalfa field was established to investigate seasonal changes of nodule activity and contents of carbohydrates, and nitrogen, and also to examine their relationships in alfalfa (Medicago sativa L.). Periodical sampling of alfalfa in cutting and uncutting plots was collected to measure growth of plants, development and activity of nodule, and content of carbohydrates and nitrogen in the third year following year of establishment. Nodule activity of alfalfa root appeared to early April, increased to a maximum in beginning of June (flowering stage), and then decreased and generally remained low from late-July to mid-August, and again increased from early September, and then decreased and generally remained low for the rest of growing season. After flowering, nodule weight tended to decrease slowly throughout the growing season. Until flowering stage, increase of dry weight was closely related with that of nodule activity. But after flowering the curve pattern of dry weight did not fit to that of nodule activity due to decrease of supply of assimilate to nodule, drought, and high temperature. Total nonstructural carbohydrates in roots were closely correlated with nodule weight and nodule activity. While, nitrogen contents in leaves were closely correlated with nodule weight and nodule activity. Also cutting on July prevented unnessesary losses of respiration during summer to provide rapid recovery of nodule activity.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.67-74
• /
• 2016

Due to the character of the climate of Korea, the pavement of a road is Influenced by freezing in winter season and thawing in thawing season. In the last few years, several articles have been devoted to the study to minimize the damage of freezing and thawing action. The purpose of this paper is to identify appropriacy of factors that influence road pavement thickness. We conduct the decision tree analysis on the field data of road pavement. The target variable is 'Frost penetration'. This value was calculated from the temperature data. The input variables are 'Region', 'Type of road pavement', 'Anti-frost layer', 'Month' and 'Air temperature'. The region was divided into 9 regions by freezing index $350{\sim}450^{\circ}C{\cdot}day$, $450{\sim}550^{\circ}C{\cdot}day$, $550{\sim}650^{\circ}C{\cdot}day$. The type of road pavement has three-section such as area of cutting, boundary area of cutting and bankin, lower area of banking. As the result, the variables that influence 'Frost penetration' are Month, followed by anti-frost layer, air temperature and region.

• Culinary science and hospitality research
• /
• v.15 no.4
• /
• pp.9-17
• /
• 2009

The microbiological examinations was conducted for the hygienic evaluation on ten Japanese restaurants during summer season in Gwangju, Korea. Total two hundreds swabbed samples using sponge were collected from the surface of facilities and utensils at restaurants. The number of total microorganism, coliform, E. coli, Staphylococcus, Salmonella, and Listeria were measured. The results demonstrated that most swabbed samples were contaminated with microorganisms and coliforms. The degree of contamination depended on the sample sites. The severely contaminated sites were floor, trench, and working table for the fish and total counts of those samples were over $10^4$ CFU/100 $cm^2$. The coliforms were detected on the floor, trench, and wood cutting board over $10^3$ CFU/100 $cm^2$. Moreover, coliforms was detected on the towel, dish, and working place for fish and vegetables. The E. coli was detected on the floor and trench of several restaurants. The Staphylococcus spp. was detected on the cutting board, towel, floor and trench of several restaurants. The Salmonella spp. and Listeria spp. were not detected all over the samples. From those results showed that sanitation management and disinfection were required on the Japanese restaurants.

• Journal of architectural history
• /
• v.15 no.2
• /
• pp.23-38
• /
• 2006

During the repair and restoration of the Daewoongjeon Hall of Youngguksa Temple, species identification and tree-ring dating for both present wood elements and charred ones excavated under the Hall, were conducted. The species of 74 wood elements of Daewoongjeon Hall, were identified as Pinus densiflora Sieb. et Zucc. and only 1 was identified as exotic Pinus species. The latter wood, which was used in the laths, seems to have been replaced during past repairs. Many documentary records and various artifacts pertaining to Youngguksa Temple are being excavated, but none described precisely the construction date of the present Daewoongjeon Hall. Also, from beneath the Daewoongjeon Hall, cornerstone and foundation of previous building and several charred wood elements were excavated. In comparing the direction of the stone columns of foundation of the previous structure and the existing Daewoongjeon Hall, the previous structure was rotated in an angle of approximately $15^{\circ}$. Therefore, in order to find the association of the previous structure with the present Daewoongjeon Hall, tree-ring dating was conducted. The dating of 41 original timbers and 14 roof-filling timbers of the present construction elements revealed that the last annual ring was of A. D. 1703 with complete latewood, indicating that those woods was cut some time between the autumn of 1703 and spring of 1704, and the building was erected in 1704 when we assume no period of wood storage. The year of the last annual ring of the charred elements, which were excavated from beneath the Daewoongjeon Hall, was analyzed as 1674. The cutting year of the woods used for the present building began in 1698, therefore, it can be presumed that the Daewoongjeon Hall before the fire was a structure that was elected shortly after 1674 and that a catastrophic fire occurred some time between 1674 and 1698.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.153-160
• /
• 1992

This experiment was conducted to investigate the adaptability of legume in different legume-grass mixtures according to altitude(600, 800, lOOOm a.s.1.) in the alpine area. The experimental plot was allocated as a split plot design with three replications. The main plots were sowing season(spring and fall) and subplots legume-grass mixture(alfa1fa-grass, red clover-grass and white clover-grass mixture). The results obtained are summarized as follows: 1. At 600m, in case of sowing alfalfa, red clover and white clover in fall. each legume of legume-grass mixtures was consistuted about 30% without between-year variation and then all legumes at fall sowing could grow. 2. At 800m, in case of sowing white clover in spring this species was consistuted about 14.7 % at the last cutting without severe between-year variation. 3. At 1000m, only white clover sown in spring like at 800m was somewhat maintained without severe between-year variation. 4. Percentage and DM yield of legume considerably decreased with the rise of altitude and alfalfa couldn't grow more than 800m.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.305-318
• /
• 2021

Alfalfa (Medicago sativa L.) is an important forage legume grown in Kansas, USA and its productivity with cool-season grasses however is unknown. The objective of this study was to determine the dry matter yield (DMY) and forage nutritive value of alfalfa-grass mixtures compared to those of alfalfa and grasses grown in monoculture with and without nitrogen fertilization. Three different alfalfa varieties were planted (reduced-lignin alfalfa, Roundup Ready, and conventional alfalfa) and two kinds of cool-season grasses (smooth brome, Bromus inermis Leyss, and tall fescue, Festuca arundinacea Schreb) were planted as a monoculture or in alfalfa-grass mixtures. Nitrogen fertilizer (urea) was applied at green-up at a rate of 56 kg/ha and after the second cutting at a rate of 56 kg/ha in 2016 and 2017, respectively. and control treatments received no nitrogen. DMY was significantly higher in monoculture alfalfa and alfalfa-grass mixtures than in grass monocultures. Between alfalfa monoculture and alfalfa-grass mixtures, no significant differences in DMY were found. For all treatments, nitrogen application significantly increased DMY compared to the control. In 2016 and 2017, the low-lignin alfalfa monoculture had the lowest acid detergent fiber (ADF) and the grass monocultures had the highest ADF. In 2016 and 2017, neutral detergent fiber (NDF) in smooth bromegrass and tall fescue was higher than in other species treatments. A low-lignin alfalfa monoculture had significantly lower NDF concentration compared to alfalfa-grass mixtures. When averaged over 2016 and 2017, relative feed value (RFV) was highest in low-lignin alfalfa and lowest in the grass monocultures. In both years, nitrogen fertilizer application did not affect nutritive values.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.766-771
• /
• 1999

The first paper of this series compared the effects of rates and frequencies of application of dairy slurry on herbage yields and stand persistence of orchardgrass (Dactylis glomerata L.), reed canarygrass (Phalaris arundinacea L.), and alfalfa (Medicago sativa L.)-grass mixtures managed as a 4-cutting system. This paper compares the effects of rates and frequencies of application of dairy slurry on herbage yield and stand persistence of alfalfa, orchardgrass, tall fescue (Festuca arundinacea Schreb.), and alfalfa-orchardgrass mixture managed as a 5-cutting system. The results presented here are part of a larger study having a primary objective of comparing alfalfa, various grasses, and alfalfa-grass mixtures for utilizing nutrients from dairy slurry applied to established stands. A randomized complete block design with treatments in a split plot arrangement with four replicates was used. The main plots consisted of 9 fertility treatments: 7 slurry rate and frequency of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The sub-plots were the forage species. Manure used for the study was composed from stored solids scraped from the alleyways of a free-stall dairy barn. Water was added to from a slurry having about 8 % solids. Slurry was pumped from the liquid spreader tank into 10.4 L garden watering cans for manual application to the plots. Herbage yields of alfalfa, tall fescue, and alfalfa-orchardgrass were generally not affected by slurry application rates and were not significantly different from the inorganic fertilizer treatment. Tall fescue significantly outyielded all other forage species at all manure and the inorganic fertilizer treatments in the second year when rainfall during the growing season was unusually high. Grasses generally had a greater response to manure applications than alfalfa and alfalfa-orchardgrass. Increasing rates of manure did not increase herbage yields of alfalfa and alfalfa-orchardgrass. Herbage yields within each species were not affected by frequency of application of the same total rate. Stand ratings of alfalfa, orcahrdgrass and alfalfa-orchardgrass were significantly lower for the very high manure application rate compared to the control treatment. Based upon the results of this study, multiple annual applications of slurry manure can be made onto these species at rates up to $1,700kg\;total\;N\;ha^{-1}\;yr^{-1}$ without detrimental effects on herbage yield and stand persistence.

• Journal of Korean Society of Forest Science
• /
• v.97 no.2
• /
• pp.181-186
• /
• 2008

Even small changes in phosphorus concentrations in stream water could cause eutrophication because of very low level of phosphorus concentrations in natural waters. I investigated the impact of strip cut and clear cut on phosphorus concentrations in stream water at the Hubbard Brook Experimental Forest and investigated stream water phosphorus concentrations as a function of flow rate and season (as well as cutting history). Mean phosphate concentrations in the control (undisturbed forest) increased $1.9{\mu}g\;L^{-1}\;to\;2.6{\mu}g\;L^{-1}$, while strip cut treatment increased phosphate concentrations in stream water $2.2{\mu}g\;L^{-1}\;to\;3.7{\mu}g\;L^{-1}$ during the same period. There was no significant effect of clear cut treatment on phosphate concentrations in stream water. No relationships were found between discharge rate and phosphate concentrations, but the magnitude of fluctuation were increased during two decades in undisturbed forest: $1-5{\mu}g\;L^{-1}$ from 1963 to 1975 and $1-12{\mu}g\;L^{-1}$ from 1983 to 1995. Based on this study, forest harvests with buffer zone will not make a problem by imported phosphate to cause eutrophication in natural water.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.33-39
• /
• 1988

Insufficient herbage during the fall in the temperate areas of the world has been a serious limitation in animal production, but leafy brassicae are potentially very useful for extending the grazing season when the growth and quality of grass is poor. This study was conducted to determine the effects of cutting stage and N fertilization on dry matter (DM) yield, forage quality and chemical composition of forage rape (Brassica napus Subsp. oleifera). The experiment was conducted in the Experimental Livestock Farm of Seoul Nat'l Univ., at Suweon, during 1985- 1986. The results obtained are summarized as follows: 1. DM percentage and yield significantly increased as the growth period was prolonged and decreased as the N fertilization increased, but in-vitro dry matter digestibility (IVDMD) was unaffected by the treatments. 2. Plant height, DM yield and $NO_3$-N content significantly increased as the rate of N fertilization increased and DM percentage decreased, but the IVDMD was unaffected. 3. The forage rape had high percentage of crude protein and ash. Glutamic acid, pro!ine and aspartic acid were the major amino acids. Concentration of P, Ca and Mg were high.