• Journal of Fashion Business
• /
• v.1 no.3
• /
• pp.35-44
• /
• 1997

The purpose of this study is to the processes and quality of local women's apparel production using the stretch fabric and to address the problems related to production in order to provide useful data for producing competitive apparels. The result of the survey can be summarized as follows; 1. Results of surveying the process for raw materials and notions indicated that most of the workers were ignorant of the properties of stretch fabrics. And most factories were stacking the stretch fabrics across improperly, while being aware of the properties of the fabrics through their experiences or in-company test. 2. The major problem involving spreading fabrics was the uneven tension, followed by static electricity, overlap and warp twist. The problems involving the cutting work were melting of the fabric by cutter and difference of size between upper and lower parts. 3. Most of the businesses were not tempering the fabric before and after its linking works due to lack of working space, short delivery time, ignorance and etc. The majority of the sample businesses were operating their cutters at the speed of 3,000 rpm or higher, which suggests a poor technological guidance.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.71-76
• /
• 2012

Shear strength of soil is power that resists failure and sliding according to any face in soils and one of the most important factors during engineering properties of soil. Shear strength is used for engineering science problems as bearing capacity methods of foundation or piles, slope stability after dam or Cutting Embankment and stability problem analysis of soils as lateral earth pressure of soil structures, ets. This study has analyzed shear strength change of samples classified 2.00mm(10sieve)와 0.85mm(20sieve), 0.475mm(40sieve) using direct shear tester after removing and drying cohesive soil ingredient of Weathered granite soil Therefore, this study would help studies about shear strength properties by particle size.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.115-120
• /
• 2006

In This Paper, We Propose The Method To Reconstruct And Estimate Partially Occluded Elliptical Objects In Images From Overlapping And Cutting. We Present The Robust Method For Recognizing Partially Occluded Objects Based On Symmetry Properties, Which Is Based On The Contours Of Elliptical Objects. A Proposed Method Provides Simple Techniques To Reconstruct Occluded Regions Via A Region Copy Using The Symmetry Axis Within An Object. Based On The Estimated Parameters For Partially Occluded Objects, We Perform Object Recognition On The Classifier. Since A Proposed Method Relies On Reconstruction Of The Object Based On The Symmetry Properties Rather Than Statistical Estimates, It Has Proven To Be Remarkably Robust In Recognizing Partially Occluded Objects In The Presence Of Scale Changes, Object Pose, And Rotated Objects With Occlusion, Even Though h Proposed Method Has Minor Limitations Of Object Poses.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.5
• /
• pp.206-208
• /
• 2008

Implantation of metals and ceramics with ions of nitrogen and other species has improved surface properties such as friction, wear and corrosion in numerous industrial applications. In recent years, PCB drills tend to be more minimized increasingly as the electronics components have been more highly accumulated and minimized. Therefore nitrogen ion implantation was performed onto PCB drill (0.15 & 0.3 mm in diameter), in order to investigate mechanical properties of WC-Co cermets surface through Nano-indentation tests. PCB drill was implanted at energy of 70 keV, 90 keV, 120 keV and with the dose range of $1{\times}10^{17}$ and $5{\times}10^{17}\;ions/cm^{2}$. After ion implantation, WC-Co PCB drill bits was tested in actual operating situation to apply cutting tools industry and is concluded that the life time of nitrogen ion implanted PCB drills is one and a half times longer than the unimplanted.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.875-885
• /
• 1989

This work is concerned with the chatter suppression by inserting viscoelastic materials into tool clamping area. Chatter was observed with and without the viscoelastic materials during cutting tests, where the overhang of the tool was made long so that the tool may be a major cause for the chatter. Two viscoelastic materials were used and the effects of thickness and prestrain were investigated. impact tests were performed on the tool in cases where the tool post was set on the cross slide and was free from any boundary conditions. Material properties of the viscoelastic materials were also obtained from resonance test results. The effects on the chatter suppression by the type of the viscoelastic material and prestrain are discussed in relation with the measured material properties.

• Steel and Composite Structures
• /
• v.25 no.6
• /
• pp.685-692
• /
• 2017

In this study, the effect of various adhesively bonded composite patches on mechanical properties of notched Al-Mg alloy plates was analyzed. For this purpose firstly, the un-notched and notched specimens were fabricated from 5086 Al-Mg alloys which have been used in armor-plated military vehicles. The surface notches as a flaw were machined with circular cutting tool to form notch aspect ratio a/c=0.15 and notch-to-thickness ratios a/t=0.5 in the radial direction on the test specimens. Then, various composite patches which reinforced by glass, carbon and Kevlar fibers were bonded adhesively at elliptically surface notches. Finally, experimental measurements conducted by applying tensile static loading. The experimental results showed that repairing with composite patches with order of carbon, glass and Kevlar fibers have remarkable effect on tensile strength of the notched plate. Also the finite element models were developed using Abaqus/Explicit code to predict the tensile strength and elongation of unrepaired notched specimen and specimen repaired by carbon fiber composite patch. The comparison between numerical and experimental results showed good agreement between them and proved the accuracy of numerical modeling.

• Current Optics and Photonics
• /
• v.6 no.3
• /
• pp.236-243
• /
• 2022

Monocrystalline silicon has excellent properties, but it is difficult to design and manufacture silicon-based mirrors that can meet engineering applications because of its hard and brittle properties. This paper used monocrystalline silicon as the main mirror material in an imaging system to carry out a feasibility study. The lightweight design of the mirror is completed by the method of center support and edge cutting. The support structure of the mirror was designed to meet the conditions of wide temperature applications. Isight software was used to optimize the feasibility sample, and the optimized results are that the root mean square error of the mirror surface is 3.6 nm, the rigid body displacement of the mirror is 2.1 ㎛, and the angular displacement is 2.5" under the conditions of a temperature of ∆20 ℃ and a gravity load of 1 g. The optimized result show that the silicon-based mirror developed in this paper can meet the requirements of engineering applications. This research on silicon-based mirrors can provide guidance for the application of other silicon-based mirrors.

• Advances in concrete construction
• /
• v.13 no.6
• /
• pp.461-470
• /
• 2022

Solid waste management is of great concern in today's world. An enormous amount of waste is generated from various industrial activities. Concrete production utilizing some of the potential waste materials will add to the benefit of society. These benefits will include reduction of landfill burden, improved air quality, riverbed protection due to excessive sand excavation, economical concrete production and much more. This study aims to utilize waste granite powder (GP) originating from granite industries as a sand replacement in concrete. Fine GP was collected in the form of slurry from different granite cutting industries. In this study, GP was added in an interval of ten percent as 10%, 20%, 30%, 40% and 50% by weight of sand in concrete. Mechanical assets; compressive strength, flexural strength and splitting tensile strength were prominent for control and blended mixes. Modulus of elasticity (MoE) and abrasion tests were also performed on control and blended specimens of concrete. To provide a comprehensive clarification for enhanced performance of GP prepared concrete samples, scanning electron microscopy (SEM) and X-ray diffraction (XRD) were performed. Results indicate that 30% replacement of sand by weight with GP enhances the mechanical assets of concrete and even the results obtained for 50% replacement are also acceptable. Comprehensive analysis through SEM and XRD for 30% replacement was better than control one. The performance of GP added to concrete in terms of abrasion and modulus of elasticity was far better than the control mix. A significant outcome shows the appropriateness of granite fines to produce sustainable and environmentally friendly concrete.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1212-1217
• /
• 2003

Fifty-two Holstein cows with different phenotypes of $\kappa$-casein ($\kappa$-CN) and $\beta$-lactoglobulin ($\beta$-LG) were selected to provide weekly milk samples for heating at 30, 70, 75 and $80^{\circ}C$ for 2 min. Coagulating properties of heated milk samples measured as rennet clotting time, rate of curd firming and curd firmness at cutting were determined by a Formagraph. Milk samples were analysed for fat and casein. Least squares analyses of data, after adjustments were made for effect of milk casein and fat contents, indicated that although an increase in heating temperatures resulted in less desirable coagulating properties, the effect of milk types was inherent irrespective of heating temperatures. The shortest rennet clotting time (6.06 min), fastest rate of curd firming (5.61 min) and firmest curd (38.05 mm) were obtained from milk with the B variant for $\kappa$-CN and B variant for $\beta$ -LG when preheated at $30^{\circ}C$. It appears that milk bearing $\kappa$-CN B is more resistant to heat perturbation. All milk samples having the $\kappa$-casein AA (milk types AA/AA, AA/AB, AA/BB) did not have a measurable K20 value when preheated at $70^{\circ}C$. This effect was observed for $\kappa$-casein AB (milk types AB/AA, AB/AB, AB/BB) at $75^{\circ}C$ and $\kappa$-casein BB (milk types BB/AA, BB/AB, BB/BB) at $80^{\circ}C$.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.371-378
• /
• 2008

Bio-diesel applications seem to be extended due to bio-diesel policies and changes of agricultural environment. This study was conducted to develop a rapeseed reaping equipment attachable to the conventional combine. This paper was intended to report concept design, process and manufacturing of the prototype rapeseed reaping equipment. For concept design, physical properties of "SUNMANG", which is a typical rapeseed as bio-diesel materials, were considered. The designed prototype rapeseed reaping equipment consisted of wide-width plates, finger type knifes, side cutter knifes and drive equipments. The wide-width plate is 2.1 m wide, 0.7 m long, and 0.002 m thick. The finger type cutter knifes have 14.5 fingers, 30 knifes, and the specification was 7.6 cm of pitch, 8.3 cm of length and $21^{\circ}$ of cutting angle. The side cutter knifes consisted of a hydraulic pump, a hydraulic motor, a flow control and a relief valve, a hydraulic hose, a driving equipment and a reciprocating cutter knife. The 18 reciprocating cutter knifes were 137 cm long and knife pitch, knife length and cutting angle were 7.7 cm, 10.5 cm, and $18^{\circ}$. Prototype weight of the rapeseed reaping equipment was heavier by 272 kg when compared with the manual reaping equipments. Load distributions of left and right side showed 50% and 49%, and those of front and rear side showed 64% and 36%. Static turn-over angles in left and right of the prototype were $38.1^{\circ}$ and $38.7^{\circ}$, respectively. The designed prototype rapeseed reaping equipment was properly mounted at the front of a conventional combine.