• 제목/요약/키워드: cutting force parameter

검색결과 69건 처리시간 0.027초

방적기계용 스핀들 인서트의 최적설계 관한 연구 (The Study for Optimal Design of Spindle Insert used in Cotton Spinning Machine)

  • 이동우;허선철;이상석;심재준
    • 한국정밀공학회지
    • /
    • 제27권4호
    • /
    • pp.72-78
    • /
    • 2010
  • Textile machinery affects various industry, such as sport leisure industry, metal and chemistry material, electric electron, mechanical energy, packing and printing industry. In case of design of textile machine, the very important fact is absorbing the minute vibration induced by spinning thread and insert which is the part of spindle plays a role of reduction of impact caused by oscillation of thread bobbin. Therefore, Optimal design was executed by design of experiments and kriging optimal design methods to prevent fracture of spindle insert under the fatigue condition and deduced the best value of design parameter to improve the stability of the products. The highest sensitivity is showed at the design parameter A and D. As the spiral number of insert is increase, tension force applied its edge is distributed at whole model and the stress concentration is reduced.

보존료, 젓갈, $CaCl_2$ 첨가가 김치발효중 배추잎의 조직감변화에 미치는 영향 (Effects of K-Sorbate, Salt-Fermented Fish and $CaCl_2$ Addition on the Texture Changes of Chinese Cabbage During Kimchi Fermentation)

  • 황인주;윤의정;황성연;이철호
    • 한국식생활문화학회지
    • /
    • 제3권3호
    • /
    • pp.309-317
    • /
    • 1988
  • 김치발효 중 일어나는 조직감의 변화에 영향을 미치는 요소들을 규명하기 위하여 조직경화제로서 $CaCl_2$, 숙성지연제로서 K-sorbate, 숙성촉진제로서 새우젓 및 멸치젓의 첨가효과와 이들 시료의 데침효과를 조사하였다. pH와 산도 및 환원당의 변화양상을 보면 새우젓 및 멸치젓 첨가구가 숙성촉진 효과를, K-sorbate, $CaCl_2$, 데침처리 등이 숙성지연효과를 뚜렷이 나타내었다. K-sorbate, $CaCl_2$ 및 데침처리에 의하여 발효중 김치배추의 절단강도 감소속도가 지연되었으며 압착력, 회복높이, work ratio의 감소속도도 지연되었으나 젓갈첨가는 이를 촉진시켰다. 이러한 결과는 관능검사에서 젓갈첨가구가 굳은 정도, 아삭아삭한 정도, 질긴 정도, 뻣뻣한 정도가 크게 낮아지는 반면, 보존료 첨가나 데침으로 이들 값이 증가하는 것과 일치하였다. pH, 산도, 배추잎의 절단두께, 절단력, 압착력, 회복높이, work ratio 등 기계적 측정치들은 신맛, 조직감, 외관의 기호도와 굳은 정도, 아삭한 정도, 질긴 정도, 뻣뻣한 정도 등의 조직감 특성과 높은 상관관계를 나타내었다. 특히, 김치의 pH는 김치의 신맛, 외관, 질긴 정도, 굳은 정도, 뻣뻣한 정도, 아삭아삭한 정도와 높은 상관관계를 나타내었다.

  • PDF

능동 복합 베어링 개발 (A Study on the Development of Active Hybrid Bearing)

  • 박정훈;심풍수;박철학;이태영
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.269-275
    • /
    • 2005
  • This article describes the development on a new style active hybrid bearing system including both merits of an aerostatic bearing system and a magnetic bearing system. The developed active hybrid bearing system has several advantages: exact rotation, robust controller against the variation of a disturbance, improvement of stiffness and a damper of the system at a high-speed operation, and constraints of the heat generated by a bias current. In order to measure a rotating error due to the change of a cutting force and the variation of a system parameter, a CCS (Cylindrical Capacity displacement Sensor) was used.

  • PDF

페룰 가공용 고정밀 주축시스템 개선설계 (Design of High Precision Spindle System for ferrule Grinding Machine)

  • 편영식;박정현;이건범;요꼬이요시유끼;여진욱;정일용;안건준;곽철훈
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.1003-1007
    • /
    • 2003
  • In order to improve the international competitiveness of ferrule industry, the core technology of the second stage for ferrule grinding system is under developing. A high speed (10,000RPM) and high precision spindle system(Radial Runout 0.2 micrometer) bearing more cutting torque and force is designed considering the limitation of cost and size, the effect of heat, and various work-piece materials. A CAE software for machine elements and general machine system is used for preliminary evaluation and selection of design parameters. A dedicated program for the analysis of spindle system is used for final evaluation and selection of design parameter. The process how to evaluate and select using such tools are presented.

  • PDF

밀링공정의 적응모델링과 공구마모 검출을 위한 신경회로망의 적용 (Adaptive Milling Process Modeling and Nerual Networks Applied to Tool Wear Monitoring)

  • 고태조;조동우
    • 한국정밀공학회지
    • /
    • 제11권1호
    • /
    • pp.138-149
    • /
    • 1994
  • This paper introduces a new monitoring technique which utilizes an adaptive signal processing for feature generation, coupled with a multilayered merual network for pattern recognition. The cutting force signal in face milling operation was modeled by a low order discrete autoregressive model, shere parameters were estimated recursively at each sampling instant using a parameter adaptation algorithm based on an RLS(recursive least square) method with discounted measurements. The influences of the adaptation algorithm parameters as well as some considerations for modeling on the estimation results are discussed. The sensitivity of the extimated model parameters to the tool state(new and worn tool)is presented, and the application of a multilayered neural network to tool state monitoring using the previously generated features is also demonstrated with a high success rate. The methodology turned out to be quite suitable for in-process tool wear monitoring in the sense that the model parameters are effective as tool state features in milling operation and that the classifier successfully maps the sensors data to correct output decision.

  • PDF

PAP옹벽에서 역해석을 이용한 사면보강 사례 연구 (A Case Study on Reinforcement of Slope in PAP Retaining Wall using Back Analysis)

  • 김장득;김용하
    • 지질공학
    • /
    • 제19권3호
    • /
    • pp.345-350
    • /
    • 2009
  • 경주-감포간 국도건설공사 중 양북터널의 종점부측은 산악지형으로 도로가 산지의 사면으로 통과하기 때문에 대절토 구간으로 이루어져 있다. 이 구간에 사면안정공법으로 PAP옹벽을 설치하였다. 옹벽을 설치한 후 6개월 정도가 지나면서부터 PAP옹벽의 앵커체 일부가 파단되었다. 즉시 계측기를 추가 배치하고 응급조치를 한 다음 지금까지의 계측기록으로 역해석을 실시하였다. 동시에 앵커체의 정착부를 확인하기 위한 지층조사와 앵커체의 이상여부를 확인하는 인장시험을 실시하였다. 역해석 결과 당초 설계에 적용한 토질정수의 90%를 적용함이 타당한 것으로 나타났다. 이를 근거로 재설계를 시행하였으며, 재설계의 결과는 당초 허용응력 306 kN이던 앵커체를 591 kN 및 784 kN의 앵커체로 교체하고, 정착부의 위치를 당초 11.0 m에서 23.0 m를 증가시켰다. 앵커체를 교체한 후 약 5개월 정도가 지난 지금까지의 계측 결과는 안정된 상태를 보여주고 있다. 이 사례는 대형사고로 이어질 수 있었던 사례를 신속하고 정확한 조치로 사면을 안정화시킨 사례이다.

Cyclic performance and design recommendations of a novel weak-axis reduced beam section connection

  • Lu, Linfeng;Xu, Yinglu;Liu, Jie;Lim, James B.P.
    • Steel and Composite Structures
    • /
    • 제27권3호
    • /
    • pp.337-353
    • /
    • 2018
  • In previous weak-axis moment connection tests, brittle fracture always initiated near the edge of the beam flange groove weld due to force flow towards the stiffer column flanges, which is the opposite pattern as strong-axis moment connections. As part of the China NSFC (51278061) study, this paper tested two full-scale novel weak-axis reduced beam section moment connections, including one exterior frame connection specimen SJ-1 under beam end monotonic loading and one interior frame joint specimen SJ-2 under column top cyclic loading. Test results showed that these two specimens were able to satisfy the demands of FEMA-267 (1995) or ANSI/AISC 341-10 (2010) without experiencing brittle fracture. A parametric analysis using the finite element software ABAQUS was carried out to better understand the cyclic performance of the novel weak-axis reduced beam section moment connections, and the influence of the distance between skin plate and reduced beam section, a, the length of the reduced beam section, b, and the cutting depth of the reduced beam section, c, on the cyclic performance was analyzed. It was found that increasing three parametric values reasonably is beneficial to forming beam plastic hinges, and increasing the parameter a is conducive to reducing stress concentration of beam flange groove welds while increasing the parameters b and c can only reduce the peak stress of beam flange groove welds. The rules recommended by FEMA350 (2000) are suitable for designing the proposed weak-axis RBS moment connection, and a proven calculation formulation is given to determine the thickness of skin plate, the key components in the proposed weak-axis connections. Based on the experimental and numerical results, a design procedure for the proposed weak-axis RBS moment connections was developed.

Hydrocolloid의 첨가가 밀가루 반죽의 특성에 미치는 영향 (Effects of hydrocolloids on wheat flour rheology)

  • 임경숙;황인경
    • 한국식품조리과학회지
    • /
    • 제15권3호
    • /
    • pp.203-209
    • /
    • 1999
  • 여러가지 종류의 hydrocolloid를 0.005%, 0.01%, 0.02% 수준으로 첨가하여 면제조를 위한 밀가루 반죽의 성질을 살펴본 결과, 색도에 있어서는 hydrocolloid 첨가에 따라 모두 L값은 감소하면서 b값은 증가하는 경향을 보였다. 첨가수준이 높아질수록 효과는 크게 나타났으며, alginate, guar, locustbean등이 원래의 반죽과 비슷하거나 약간의 개선효과를 보였다. 호화도 양상에 있어서는 호화개시온도에는 영향이 없었으나, 최고점도는 carrageenan, xanthan이 증가하였고, guar는 별다른 영향을 보이지 않았다. 점도붕괴도는 carrageenan, guar, xanthan에서 증가하였고, 노화도는 carrageenan, guar, locustbean, xanthar에서 모두 증가하였다. 텍스쳐측정 결과 hydrocolloid첨가에 따라 견고성은 증가하였고 탄성은 guar, locustbean만이 감소하지 않았다. 이차인자인 검성은 carrageenan, CMC, guar, locustbean의 0.002%에서, 씹힘성은 CMC, guar의 0.002%에서 증가하였다. 절단력은 농도수준이 높아질수록 증가하였고, 그 효과는 guar에서 현저하였다. 이상의 결과로 볼 때, 면류의 품질에 있어 색도 및 견고성, 응집성 및 탄력성이 중요하고 우리나라 사람들의 국수에 대한 선호도는 탄력성이 크고 쫄깃쫄깃한 성질과 탄력성이 크면서도 부드러운 성질의 면에 대해 크다는 것을 고려해보면 견고성, 검성, 씹힘성의 증가가 큰 guar와 locustbean이 가장 국수의 성질에 바람직한 영향을 줄 것으로 사료되며, 이에 따라 반죽의 성질뿐 아니라 실제 국수를 만들었을 때 텍스쳐 변화와 관능평가등에 대한 더 많은 연구결과가 필요할 것으로 생각된다. 0.4 cm 깊이의 선량이 94%, 94%로 가장 이상적으로 관찰되었다. 보여 주었다. in vivo상에서 흰쥐를 이용한 항피로효과 실험을 위하여 양파 농축물과 마늘 농축물을 각각 사료 500 g당 양파, 마늘의 양으로 10 g, 5 g, 2.5 g을 첨가하여 실험에 사용하였고, 양파음료는 음료 그대로를 음용수 대신에 사용하여 흰쥐의 유영시간을 실험한 결과 사료 500g당 양파 2.5g 첨가시 13%의 감소를 보여 주었으나 5g 첨가시는 대조군과 거의 같은 유영시간을 나타내었고 109g 첨가시는 57%의 증가를 나타내었다. 마늘에 있어서도 이와 유사한 실험결과를 보여 주었으며 2.5g 첨가시 26%의 감소를 5g 첨가시는 12%의 증가를 보여주었고 10g 첨가시는 59%의 증가를 보여주었다. 특히 양파음료는 가장 높은 효과인 72%의 증가를 보여 주었는데 이는 양파의 효능과 더불어 감미제로 사용된 당류의 영향이 아닌가 사료된다.례음식과 상차림에 대한 중요성에 대한 인식은 비교적 높은 편이나 알고 있으며 행하는 정도는 몇몇 상차림을 제외하고는 많은 상차림에 대하여 낮았음을 볼 수 있었다. 집안의 여러 가지 풍속과 생활습관, 음식솜씨들을 친정어머니와 시어머니를 통하여 물려받는다는 것을 알 수 있었는데 이러한 맥락에서 다양한 문화와 함께 살고 있는 재미 2세들의 한국 전통음식문화의 계승은 어려움이 많으리라 사료된다. 주부 자신들의 전통음식에 대한 진정한 이해와 함께 우리음식의 뿌리를 내리고 외국음식과 조화를 이루어 나가도록 하는 적극적인 노력이 필요할 것이다. 그러므로 또한 재미한인 사회에서의 한국전통음식에 대한 홍보, 교육 강화와 함께 재미교포들 모두 관심과 실행이 촉구되어져야 하겠다., ‘아니오’의 경우 무학(44.1%)이 다른 집단에 비하여 상대적으로 가장 높은 비율을 차지하였다.

  • PDF

70 MPa급 인공암반 내 실대형 쉴드TBM 굴진실험을 통한 굴진율 모델 및 활용방안 제안 (Development of a TBM Advance Rate Model and Its Field Application Based on Full-Scale Shield TBM Tunneling Tests in 70 MPa of Artificial Rock Mass)

  • 김정주;김경열;류희환;정주환;홍성연;조선아;배두산
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제6권3호
    • /
    • pp.305-313
    • /
    • 2020
  • 전력송전을 위한 터널식 전력구는 점차 시공실적이 증가하고 있는 추세이며, 해저 및 대심도 등 시공환경이 어려운 구간의 건설도 증가하고 있다. 이에 소단면 쉴드TBM의 효율적 운영을 위해 굴진율 및 설계모델이 필요하다. 그러나, 제한된 지반조사 회수 및 굴착면 맵핑으로 인하여 암반특성과 굴진데이터를 정확히 매칭시켜 상호간 상관관계 및 굴진율 모델을 도출하는데 어려움이 있다. 이에 소단면 쉴드TBM에 적합한 굴진율 및 설계모델을 제시하기 위하여 커터헤드의 직경이 3.56 m인 실험용 EPB 쉴드TBM을 제작하고, 총 부피 87.5 ㎥인 인공암반 내에서 총 19번의 실대형 굴진실험을 수행하였다. 본 실험은 70MPa의 균질한 암반강도에서 수행되었기 때문에 운전변수인 추력과 커터헤드의 RPM에 따른 굴진율과 기계데이터간 상관관계를 효율적으로 분석할 수 있으며, 실제 굴착메커니즘과 동일하기 때문에 도출된 압입깊이와 토크값은 활용성이 높다. 본 연구를 통해 디스크커터 당 연직력과 압입깊이의 상관관계 및 연직력과 회전력의 상관관계를 도출하였다. 이러한 상관관계들을 이용하여 70 MPa급 암반에 대해 굴진율 예측과 TBM 설계가 가능할 것으로 판단한다. 또한, 인공암반의 RQD가 100%로 현장적용에 대한 한계점에 대해 FPI의 개념을 도입하여 굴진율 모델의 활용성을 증대시키고자 하였다.