• Archives of Craniofacial Surgery
• /
• v.24 no.2
• /
• pp.87-90
• /
• 2023

Endotracheal intubation is often necessary in the course of animal experiments, especially in craniofacial surgery. However, endotracheal intubation can be a major burden in this context. The authors performed simple and cost-saving method using a 200 µL yellow micropipette tip, and the success of this method was demonstrated by X-ray and autopsy. We used a total of 30 rats. After the rats were fixed with a plaster, the trachea and vocal cords were visualized with the tongue pulled back. Under direct visualization of the vocal cords, a curving micropipette tip was advanced into the trachea. This method can be learned quickly and applied successfully by general experimenters. We successfully intubated all 30 rats without any complications. The success rate of micropipette tip intubation was 100%. This procedure was performed by one experimenter within 2 to 3 minutes after induction of anesthesia. We demonstrated its superiority by X-ray and autopsy. Herein, we describe endotracheal intubation of rats using micropipette tips. To the best of our knowledge, this method is novel and represents the simplest and most efficient means of intubation in rats, providing an alternative to conventional endotracheal intubation.

• Tunnel and Underground Space
• /
• v.10 no.4
• /
• pp.516-525
• /
• 2000

Recently, the demand for pollution-free demolition work of old reinforced concrete and steel structure has rapidly increased as the redevelopment of urban area has been accelerated. This study deals with linear shape charges for explosive jet cutting on steel structure. We have tested material and shape of steel structure, characteristics of thickness and strength, shape of linear shape charges, type of shape charges, cumulative charges, type of liner, stand-off distance, detonation method. effect of sound and vibration by air blast in explosive jet cutting method. So, We developed linear shape charges in order to take advantage of optimum explosive jet cutting condition. Shape charges were made of PETN explosives. We obtained the experimental formula to decide the amount of explosive needed for thickness of steel structure plate. There are prospects for application of the explosion curving technology under the open space conditions for dismantling the steel structure and steel bridge, scrapped old boats, which are going out of service.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.11-17
• /
• 2017

In this paper, we propose the authoring tools engine supported a 4 dimension display contents which serve display of high quality (UHD*250) curved using 4 dimension engine, which is a innovation technology by authoring tools of management software supported 4 dimension editing environment on curved flexible display. The important technology is as follows, the first, the authoring tools of 4 dimension viedo wall for a flexible high quality display(UHD*256) using multiscreen synchornization, the second implemented a bidirection interaction technology of UI/UX interface, which is established by 360 degree recognition sensor for digital signage, the 4 dimension viedowall flexible display with curve, the third, implemented the authoring tool software for various dimension electronic books first in the world.

• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.427-448
• /
• 2014

At present, the time of easy oil and gas is over. Now, the largest part of fossil fuels is concentrated in the deepest levels of tectonic structures and in the sea shelves. One of the most cumbersome operations of their extraction is the bore-hole drilling. In connection with austere tectonic and climate conditions, their drivage every so often is associated with great and diversified technological difficulties causing emergencies on frequent occasions. As a rule, they are linked with drill string accidents. A key role in prediction of these situations should play methods of theoretical modelling. For this reason, there is a growing need for development and implementation of new numerical methods for computer simulation of critical and post-critical behavior of drill strings (DSs). In this paper, the processes of non-linear deforming of a DS in cylindrical cavity of a deep bore-hole are considered. On the basis of the theory of curvilinear flexible rods, non-linear constitutive differential equations are deduced. The effects of the longitudinal non-uniform preloading, action of torque and interaction between the DS and the bore-hole surface are taken into account. Owing to the use of curvilinear coordinates in the constraining cylindrical surface and a specially chosen concomitant reference frame, it became possible to separate the desired variables and to reduce the total order of the equation system. To solve it, the method of continuation the solution by parameter and the transfer matrix technique are applied. As a result of the completed numerical analysis, the critical states of the DS loading in the cylindrical channels of inclined bore-holes are found. It is shown that the modes of the post-critical deforming of the DS are associated with its irregular spiral curving prevailing in the zone of bottom-hole-assembly. The possibility of invariant state generation during post-critical deforming is established, condition of its bifurcation is formulated. It is shown that infinite variety of loads can correspond to one geometrical configuration of the DS. They differ each from other by contact force functions.

• Korean Journal of Oriental Medicine
• /
• v.12 no.2 s.17
• /
• pp.63-73
• /
• 2006

In the original plant of Arisaematis Rhizomas, the features of external and internal shape of Arisaema amurense var. serratum $N_{AKAI}$ and A. amurense $_{MAXIM}$. are as follows. 1. In the external shape of original plant, Arisaema amurense var. serratum $N_{AKAI}$ has high stem, an oval-elliptic leaflet and a serrate leaf margin. But A. amurense $M_{AXIM}$ has a relatively low stem, an upside oval leaflet and no serrate leaf margin. 2. On the herbs character of original plant, Ansaema amurense var. serratum $N_{AKAI}$ is small in height and diameter, but A. amurense $M_{AXIM}$ is relatively large in height and diameter. 3. On the gathered herbs character of original plant, the section of Arisaema amurense var. serratum $N_{AKAI}$ is brightly white, easily spilt and strong scent. But the section of A. amurense $M_{AXIM}$ is thin yellowish brown, not easily spilt and weak scent. Also the grade of gathered herbs, both can be classified by diameter and external scent. 4. In the current herbs character, Korean and Sichuan Province products are irregullar shape and have no scent, Jilin Province products are regular shape. Also, Guangxi Province products are small size and concave in one side, Hebei Province products are irregular size and shape. 5. In internal shape of original plant, epidermal cell of Arisaema amurense var. serratum is very tight. With the except of micro difference in parenchyma cell of cortex, on the whole there are nearly no differences with A. amurense $M_{AXIM}$. Also, samely in the internal shape, according to collecting sites, epidermis exhibits a lot layer in curving state and secreting duct is developed and vascular bundle and exists between parenchyma cell of cortex. In the future, additional study is needed to distinguish herb and effect between same genus-degree of relatedness.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.163-171
• /
• 2017

PURPOSES : Traffic safety facilities are used to prevent traffic accidents before they occur by providing drivers with information on traffic situations and the geometric design of roads. However, some facilities not defined in guidelines do not meet installation criteria, yet are being installed and used in order to increase efficiency in traffic flow and prevent traffic accidents in a specific expressway zone. In this study, we have evaluated the effect of delineation system which are not defined in the guideline criteria. METHODS : Different virtual scenarios were created for roads using expressway median barrier chevron signs, with a driving simulator used to evaluate the installation and operational effect of such signs. Ten experiments were performed with left- and right-curved roads at curve radius intervals of 500 m, from 500 m to 2,500 m. RESULTS : For sections with a curve radius of more than 1,500 m, drivers had a clear tendency toward stable driving regardless of delineation system. When a chevron sign is installed on a protection fence in the road curving left, an expanded installation is recommended up to the section with a curve radius of 1,000 m. According to the analysis results for the RHB (Relative High Beta spectrum), driving concentration also improved up to a curve radius of 1,000 m. CONCLUSIONS :The experiment result indicates the extent of biasing within a lane and the manipulation amount of steering handle, were analyzed and found to be affected by curve radius and road alignment regardless of delineation system.

• Environmental and Resource Economics Review
• /
• v.13 no.3
• /
• pp.549-572
• /
• 2004

This paper develops the methodology for the indexation of Sustainable Development Indicators(SDIs) in 4 sectors(social, environmental, economic, and institutional sectors), and provides the empirical results of Sustainable Development Index(SDI) for Korea from 1990 to 2001. Given 1995 as the basic year, the trend of SDI for Korea displays a slowly curving U-shape. The down trend of SDI until mid-90's results from the decline of SDI in economic and environmental sectors, and the uptrend of SDI after mid-90's results from the sharp rising of SDI in social and institutional sectors. The implication of the results is that Korea generally shows a positive trend toward the sustainable development. However, there should be a careful consideration about partly downward trend in individual SDIs, because of the different trend of SDI in each sector.

• Archives of Plastic Surgery
• /
• v.47 no.4
• /
• pp.317-323
• /
• 2020

Background Microtia with constricted features is characterized by a short helical length of variable severity, upper antihelical or scaphal deficiency, and a downfolded upper ear. No consensus has been reached regarding the most appropriate surgical method for this condition. In this study, we aimed to introduce a simple and safe surgical method for the correction or reconstruction of upper helix ear deformities. Methods Between February 2011 and June 2014, eight patients with microtia with constricted upper helix ear deformity underwent reconstruction of the ear deformity. The upper ear helical framework was constructed by carving and curving the eighth rib cartilage harvested from the ipsilateral chest wall, covering this cartilage with a superficial temporal fascial flap, and adjusting the skin graft to align with the ear contour. To evaluate their satisfaction, patients were asked to complete a questionnaire regarding ear shape, symmetry, position, color, and overall outcome scored on a 5-point scale at 12 months postoperatively. Results None of the patients experienced severe complications in the reconstructed ear. The preoperative and postoperative vertical ear length ratios were 0.88 and 1.02, respectively. And the mean patient satisfaction scores for shape, symmetry, position, color, and overall outcome were 4.2, 4.5, 4.7, 4.4, and 4.6 out of 5 points, respectively. All patients expressed a high level of satisfaction at 12 months postoperatively. Conclusions Our technique provides a good alternative method for the reconstruction of moderate constricted upper helix ear deformities in patients who meet the surgical indications with satisfactory outcomes and few complications.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.34-42
• /
• 2007

In this paper, we propose a staff-line detection and removal algorithm from a music score image obtained by a mobile phone camera. As a preprocessing technique to recognize a music score image, staff-line detection and removal should be efficiently applied to the skewed or curved images. The proposed method detects a staff-line by dividing a staff according to the degree of distortion. The number of division is calculated by dividing a staff repletely until an average of differences of y coordinates in every divided position is smaller than a threshold. Therefore, the number of division can be adaptively estimated according to the degree of the distortion. For an experiment, we make various kinds of images by rotating one from $1^{\circ}\;to\;3^{\circ}$ or curving slightly upward. The results show that the proposed method performed well on the experiment images.

• Convergence Security Journal
• /
• v.14 no.1
• /
• pp.51-57
• /
• 2014

The purpose of the research is to let people recognize the necessity of Karatedo training and enhance the value of it. Karate sparring is quite helpful to learn the skills that how to escort a protectee as a guard. The skills are divided into hand skills, foot skills and pitching skills. Firstly, it is the hand skills. 'ap-son-chi-gi' or 'di-son-chi-gi' at pressure points such as face, neck and abdomen is effective to overpower adversary. If straight attacks are not easy, 'return stroke' is better. Secondly, it is the foot skills. Front kick towards pressure points, straight attacks like side kick and hindpaw kick and curving attacks like front-spinning kick, 'ap-hu-ri-gi and 'di-hu-ri-gi', these are different types of the foot skills. Lastly, it is the pitching skills. To overpower compeletly, tripping up and 'hu-ri-gi' for breaking the balance and then hand and foot skills for attacking the pressure points are the best way.