• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제8권10호
• /
• pp.421-426
• /
• 2019

본 논문에서는 단백질 복합체에서 단백질 사이의 접촉 영역이 갖는 기하학적 특징을 가시화하는 방법을 제안한다. 단백질 또는 리간드가 요철이 있는 곡면으로 표현될 때, 두 곡면이 서로 접하면서 교차하지 않는 성질을 형태 상보성이라 한다. 단백질-단백질 또는 단백질-리간드 도킹 연구에서 형태 상보성과 화학적인 성질, 엔트로피 등이 접촉 영역의 발견에 중요한 역할을 한다는 것을 볼 수 있다. 일반적으로 형태 상보성이 높은 영역을 발견한 뒤, 이 영역에 속한 아미노산들의 잔기 극성 및 소수성 등을 이용하여 접촉 영역을 예측한다. 접촉 영역을 예측하기 위한 연구에서는 기존에 알려진 복합체에서 접촉 영역이 갖는 기하학적인 특징을 조사하는 작업이 필요하며, 이를 위해 기하학적인 특징을 가시화하는 작업은 필수적이다. 본 논문에서는 단백질 복합체에서 접촉 영역을 발견하고, 두 개의 단백질 각각의 접촉 면에 속한 근거리의 정점들의 기하학적인 특징을 법선 벡터 및 평균 곡률로써 가시화하는 방법을 제안한다.

• 천문학회보
• /
• 제46권1호
• /
• pp.57.2-57.2
• /
• 2021

Variability in Young Stellar Objects (YSOs) can be caused by time-dependent accretion rates, geometric changes in the circumstellar disks, the stochastic hydromagnetic interactions between stellar surfaces and inner disk edges, reconnections within the stellar magnetosphere, and hot/cold spots on stellar surfaces. We uncover ~1400 variables from a sample of ~5300 YSOs in nearby low-mass star-forming regions using mid-IR light curves obtained from the 5.5-years NEOWISE All Sky Survey. The mid-IR variability traces a wide range of dynamical, physical, and geometrical phenomenon. We classify six types of YSO variability based on their light curves: secular variability (Linear, Curved, Periodic) and stochastic variability (Burst, Drop, Irregular). YSOs in earlier evolutionary stages have higher fractions of variables at all types and higher amplitudes for the variability. Along with brightness variability, we also find a diverse range of secular color variations, which can be attributed to a competitive interplay between the variable accretion luminosity of the central source and the variable extinction by material associated with the accretion process. We compare the variability of known FUors/EXors and VeLLOs/LLSs, which represent two extreme ends (burst versus quiescent) of the episodic accretion process; FUors/EXors have a higher fraction of variables (65%) than VeLLOs/LLSs (41%). Short-term (few day) and long-term (decades) variability, as well as possible AGB contamination in the YSO catalogues, are also discussed.molecules become more complex by surface chemistry induced directly by high energy photons or by the thermal energy diffused over heated grain surface. Therefore, the ice composition is an

• 한국입자에어로졸학회지
• /
• 제6권3호
• /
• pp.131-138
• /
• 2010

Flexible electronics are the electronics on flexible substrates such as a plastic, fabric or paper, so that they can be folded or attached on any curved surfaces. They are currently recognized as one of the most innovating future technologies especially in the area of portable electronics. The conventional vacuum deposition and photolithographic patterning methods are well developed for inorganic microelectronics. However, flexible polymer substrates are generally chemically incompatible with resists, etchants and developers and high temperature processes used in conventional integrated circuit processing. Additionally, conventional processes are time consuming, very expensive and not environmentally friendly. Therefore, there are strong needs for new materials and a novel processing scheme to realize flexible electronics. This paper introduces current research trends for flexible electronics based on (a) nanoparticles, and (b) novel processing schemes: nanomaterial based direct patterning methods to remove any conventional vacuum deposition and photolithography processes. Among the several unique nanomaterial characteristics, dramatic melting temperature depression (Tm, 3nm particle~$150^{\circ}C$) and strong light absorption can be exploited to reduce the processing temperature and to enhance the resolution. This opens a possibility of developing a cost effective, low temperature, high resolution and environmentally friendly approach in the high performance flexible electronics fabrication area.

• 대한전자공학회논문지SP
• /
• 제40권3호
• /
• pp.185-193
• /
• 2003

MPEG-4 삼차원 메쉬 모델 압축(3DMC) 표준에서 사용되는 평행사변형예측 방법은 예측하고자 하는 꼭지점이 인접한 꼭지점들과 같은 평면상에 있다고 가정하여 하나의 삼각형 내에 있는 인접한 세 개의 꼭지점 좌표 값만을 이용하므로 예측 효율이 좋지 않다. 본 논문에서는 삼각형 주변의 꼭지점 좌표값과 인접하는 삼각형 사이의 사잇각을 고려한 통합예측을 이용하여 삼차원 메쉬 모델의 기하정보를 부호화하는 방법을 제안한다. 우선 제안한 꼭지점 계층탐색 방법으로 위상학적으로 거리가 가까운 점들을 탐색하여 정렬된 값들의 기하학적 상관도를 높이고, 정렬된 삼차원 메쉬의 꼭지점 순서에 따라 주변의 꼭지점 값들을 이용하여 현재 꼭지점 값을 예측한다. 본 논문에서 제안한 통합예측 방법은 다양한 VRML 포맷의 테스트 모델에 대해서 기존의 MPEG-4 3DMC의 평행사변형예측 방법보다 우수한 성능을 보인다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권3호
• /
• pp.139-145
• /
• 2010

In the present study, we conducted resistance test, propeller open water test and self-propulsion test for a ship's resistance and propulsion performance, using computational fluid dynamics techniques, where a Reynolds-averaged Navier-Stokes equations solver was employed. For convenience of mesh generation, unstructured meshes were used in the bow and stern region of a ship, where the hull shape is formed of delicate curved surfaces. On the other hand, structured meshes were generated for the middle part of the hull and the rest of the domain, i.e., the region of relatively simple geometry. To facilitate the rotating propeller for propeller open water test and self-propulsion test, a sliding mesh technique was adopted. Free-surface effects were included by employing the volume of fluid method for multi-phase flows. The computational results were validated by comparing with the existing experimental data.

• Natural Product Sciences
• /
• 제17권1호
• /
• pp.45-50
• /
• 2011

Sophisticated modern research tools for evaluation of medicinal plants are available but microscopic methods are one of the simplest and cheapest methods to establish the identity of the source materials. Pharmacognostical investigation of the dried, powdered and anatomical sections of the fruits of Trachyspermum roxburghianum (DC) Craib was carried out to determine its macro and microscopical characteristics along with its physical constants. Externally, the fruits, yellowish or greenish brown in colour are elongated, elliptical, slightly curved, prominently ridged and longitudinal. As seen in transectional views of the fruits from Trachyspermum roxburghianum, the mericarp has concave sides called commissural surfaces and a convex outer side called the dorsal surface. The mericarp has three primary ridges alternating with two secondary ridges on the dorsal side. On the commissural side, there are two primary ridges which are lateral in position and two secondary ridges in the commissural side. The seed is attached to the pericarp by a short stalk called a raphe. Circular, four-lobed calcium oxalate crystals are fairly abundant in the endosperm. Phytochemical studies revealed the presence of phenolic compounds, triterpenoids, proteins and sugars. The pharmacognostical profile of the fruits will assist in standardization for quality, purity and sample identification.

• Wind and Structures
• /
• 제11권4호
• /
• pp.257-273
• /
• 2008

A number of passive aerodynamic drag reduction methods were applied separately and then in different combinations on an intercity bus model, through wind tunnel studies on a 1:20 scale model of a Mercedes Benz Tourismo 15 RHD intercity bus. Computational fluid dynamics (CFD) modelling was also conducted in parallel to assist with flow visualisation. The commercial CFD package $CFX^{TM}$ was used. It has been found that dramatic reductions in coefficient of drag ($C_D$) of up to 70% can be achieved on the model using tapered and rounded top and side leading edges, and a truncated rear boat-tail. The curved front section allows the airflow to adhere to the bus surfaces for the full length of the vehicle, while the boat-tails reduce the size of the low pressure region at the base of the bus and more importantly, additional pressure recovery occurs and the base pressures rise, reducing drag. It is found that the CFD results show remarkable agreement with experimental results, both in the magnitude of the force coefficients as well as in their trends. An analysis shows that such a reduction in aerodynamic drag could lead to a significant 28% reduction in fuel consumption for a typical bus on intercity or interstate operation. This could translate to a massive dollar savings as well as significant emissions reductions across a fleet. On road tests are recommended.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.33-37
• /
• 2009

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the partial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian grid system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. By using the cut cell method, performance of computation gets better because of reducing the whole number of meshes.

• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.91-102
• /
• 2014

The outer surface of an irregular structure contains panels with two-directional curvature called NURBS. To construct these forms of exterior materials, complex geometric surface should be divided into forms and sizes that can be manufactured and constructed. Because the bigger the curvatures of these divided exterior panel, the more expensive the construction costs, these complex two-directional curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures. Yet, to gain higher ground in technological competition in the field of irregular structure construction, companies do not share know-how that they obtained. Accordingly, small construction and design companies have trouble calculating even rough estimate and cannot adjust expected construction cost based on comparison of design alternatives. Given this situation, this study conducted the research that can support decision-making in the design stage of the construction and provide basic material for optimal range to reduce manufacturing cost by the minimizing the distorted plane of the irregular structure.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1173-1181
• /
• 1999

In X-ray stress measurements for uni-directionally deformed surfaces such as grinding, a strongly curved $sin^2{\Psi} diagram, so called $\Psi-splitter, has been observed recently. It has been known that this is caused by the residual shear stress induced in the deformed layer by external forces. In this case it is necessary to consider this enough for ceramics and composite materials with tri-axial stress analysis. However, sufficient studies have not been done about the tri-axial stress analysis of the macro stress and micro. stress on each phase of the composite materials. The result of obtaining is as follows. 1. $\Psi-splitter does not appear in the vertical direction though $\Psi-splitter appears in grinding direction in WC-Co cemented carbides. The reversal of $\Psi-splitter to each phase does not appear. 2. $\Psi-splitter caused in WC-Co cemented carbides has a close relation in dislocation which accumulates in WC phase and phase transformation caused in Co phase. 3. The residual stress on the surface of grinding of each phase is in the state of the compression stress.