• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.39-46
• /
• 2010

IIn this study, used is the equivalent loading method based on the inherent strain to predict the welding deformation of panel members. Equivalent loads are computed from the inherent strain distribution around weld line, and then applied for the linear finite element analysis. Thermal deformation of panel members can be, of course, carried out through the rigorous thermal elasto-plastic analysis procedure but it is not practical in applying to predicting the welding deformation of large structures such as blocks found in a ship structure from view of computing time. The present equivalent load approach has been applied to flat plate model to verify the present approach, and to several curved plate models having the curvature in the welding direction to investigate the effect of the longitudinal curvature upon the weld-induced deformation. The results are compared with those by thermal elasto-plastic analysis. As far as the present results are concerned, it can be said that the present approach shows good agreement with the results by welding experiment and the rigorous thermal elasto-plastic analysis. The present approach has been also applied to predict the welding deformation of panel block as for application illustration to practical model.

• 한국치위생학회지
• /
• 제9권2호
• /
• pp.111-124
• /
• 2009

This study analyzes through the review of literature and laws the exposure time, clinical frequency, and radiation exposure of intraoral and extraoral radiography as well as of panoramic radiography performed by dental hygienists in dental clinics, compares the dental radiology curriculums of radiological science and dental hygiene departments, and proposes the expansion of dental hygienists' radiography operations. The radiology curriculums were compared between the radiological science and dental hygiene departments of colleges. For new analysis by radiography for dental diagnosis, the exposure time, radiation absorbed dose, effective dose, and number of days of natural radiation were compared by the type of oral radiation films and radiographical techniques proposed by domestic and international studies. The exposure time of panoramic radiography is 15 seconds and it takes about two minutes for completion, whereas the exposure time of the standard radiography is 0.2~0.8 seconds and it takes 10 times longer for completion of the radiography of full mouth than the panoramic radiography. The standard radiography can cause distortions of radiation at severely curved parts of dental arch and palatopharyngeal reflex. However, panoramic radiography can be performed even for lock jaw patients, causes less inconvenience to patients and is much simpler than the standard radiography. The percentage of dental clinics where radiography is performed by dental hygienists was 92.0%, and the percentage of standard film radiography by dental hygienists was 98% whereas the percentage of panoramic radiography by dental hygienists was 92%. For the absorbed dose which is an indicator of radiation exposure, the When the effective dose which is an indicator of the danger of radiation exposure was converted to the number of days of natural radiation, it was 3.3 days for panoramic radiography, but 13.9 days for the full mouth standard radiography by bisecting angle technique which was 4.2 times longer than the panoramic radiography. There were two colleges that had a dental radiology course with two credits in the departments of radiological science. The credits for dental radiology courses in the department of dental hygiene ranged varied by college, ranging from 3 to 8; on average, the theory course was 2.2 credits and the practice course was 2.02 credits. To summarize the above results, the percentage of dental clinics where panoramic radiography is performed by dental hygienists under the guidance of dentists is high. Panoramic radiography has become an essential facility for dental clinics. It is faster than standard film radiography and less dangerous due to low radiation exposure. Panoramic radiography is a simple mechanical job that does not require training of oral radiography by radiotechnologist. Because panoramic radiography is one of major operations which must be performed at all times in dental clinics, it must be designated as intraoral technique rather than extraoral technique, or legalized for inclusion in the scope of operations of dental hygienists.

• 디자인학연구
• /
• 제15권1호
• /
• pp.181-190
• /
• 2002

모든 사물의 형태는 사물이 가진 내부에너지와 외부스트레스간의 균형관계라는 기존의 정의에서 출발된다. 이것을 생물체간의 균형관계로 볼 때 내부에너지는 생물체가 스스로의 존재유지를 위해 필요한 에너지의 발생일 것이며 외부스트레스는 주변환경에서 가해오는 압박이라고 할 수 있을 것이다. 즉 생존에 필요한 내부에너지의 유지와 여기에 가해지는 외부스트레스가 균형을 유지하는 점에서 우리는 사물의 형상이 존재하게됨을 알 수 있다. 그런데 여기서 아울러 발견되는 것은 이러한 형상들은 주로 비직선(非直線)인 곡선(曲線)과 곡면(曲面)으로 이루어져 있음이란 사실이다. 다시 말해 직선과 직면으로 이루어진 형상이란 존재하는 사물의 세계에서 발견하기란 거의 불가능하다. 대체로 우리는 그동안 곡선과 곡면을 주로 시각적 아름다음<美>의 대상으로만 여겨왔다. 본고에서는 곡선과 곡면에는 아주 먼 원인류(原人類)부터 우리의 생존을 지켜주는 중요한 기능(機能/function)들이 함께 하고있음을 제시하고, 다시 그러한 기능을 물리적 역학구조의 시각에서 좁혀 보다 세밀히 관찰해 봄으로서 특히 곡선형태를 다루는 디자인의 근원에서 무엇이 중요한 것인가를 살펴보았다. 물론 여기에는 수학이나 화차 또는 생물학 등의 관점에 따라 자연현상을 여러 갈래로 분석하여 이들을 종합하는 것이 더욱 타당할것이나 다만 본고에서는 연구능력의 한계로 물체의 외부형상을 다루는 디자인에 적응될 수 있는 물리적 구조에만 주된 관심을 두기로 하였다. 결과적으로 자연에서 발생한 곡선·곡면의 물리적 구조현상을 디자인에 더욱 충실할 때 시각적으로도 더욱 아름답다는 사실을 재차 확인할 수 있었음이 본고의 작은 결실이라 할 수 있다.

• 대한토목학회논문집
• /
• 제29권1B호
• /
• pp.35-45
• /
• 2009

본 연구에서는 사행수로에서 유속구조가 추적물질의 혼합에 미치는 영향을 분석하기 위하여 2개의 만곡부를 갖는 S자형 실험수로를 제작하여 순간 주입된 추적자물질에 대한 분산실험을 수행하였다. 실험자료를 분석한 결과, 주 흐름은 사행수로의 최단경로를 따라 이동하며 만곡부에서 불균일한 분포를 갖는 것으로 밝혀졌다. 이차류의 경우, 만곡부에서 강력한 셀이 발달하나 직선부에서는 소멸하다가 다시 다음 만곡부에 반대 방향의 셀로 재생성됨이 확인되었다. 오염운의 거동은 주흐름의 불균일한 분포와 이차류셀에 의해 매우 큰 영향을 받는 것으로 나타났다. 주흐름의 불균일한 분포는 오염운을 종방향으로 분리시키고, 이차류 셀은 만곡부 외측의 처진 오염운을 횡방향으로 더욱 분리시키는 역할을 하게 되어, 결과적으로 만곡부의 복잡한 유속구조가 오염운을 종 횡방향으로 모두 분리시키고 나아가서 많이 퍼지게 하는 작용을 하는 것으로 밝혀졌다. 2차원 추적법의 적용을 통해서 각 케이스별 종 횡분산계수 실측치를 산정한 결과, 사행수로 전체구간에 대한 무차원 횡분산계수는 0.012~0.875의 범위를 갖는 것으로 밝혀졌다. 횡분산계수는 하폭 대 수심비에 대체적으로 비례하는 것으로 나타났다. 횡분산계수 이론식에 의한 추정치와 비교한 결과, 이론치가 실측치와 비교하여 다소 과대 산정하는 경향을 보여주고 있음을 알 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권6호
• /
• pp.437-447
• /
• 2013

The fibula is one of the most useful sources for harvest of a vascularized bone graft. The fibula is a straight, long, tubed bone, much stronger than any other available bone that can currently be used for a vascularized graft. It has a reliable peroneal vascular pedicle with a large diameter and moderate length. There is a definite nutrient artery that enters the medullary cavity, as well as multiple arcade vessels, which add to the supply of the bone through periosteal circulation. The vascularized fibula graft is used mainly for long segment defects of the long tubed bone of the upper and lower extremities. It can provide a long, straight length up to 25 cm in an adult. The fibula can be easily osteotomized and can be used in reconstruction of the curved mandible. Since the first description as a vascularized free fibula bone graft by Taylor in 1975 and as a mandibular reconstruction by Hidalgo in 1989, the fibula has continued to replace the bone and soft tissue reconstruction options in the field of maxillofacial reconstruction. For the better understanding of a fibular free flap, the constant anatomical findings must be learned and memorized by young doctors during the specialized training course for the Korean National Board of Oral and Maxillofacial Surgery. This article reviews the anatomical basis of a fibular free flap with Korean language.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.799-802
• /
• 2008

General behaviors based on hydraulic characteristics of natural streams and channels have been recently analyzed and developed via various numerical models. However in the states of natural hydraulics, an experimental research must be performed simultaneously with the mathematical analysis due to effects of hydraulic properties such as meander, sediment, and so on. In this study based on 2-D advection-dispersion equation, flow and tracer experiments were performed in the S-curved meandering laboratory channel with a rectangular cross-section. The channel was equipped with instrument carriages which was equipped with an auto-traversing system to be used with velocity measuring sensors throughout the depth and breadth of the flow field. To measure concentration distribution of the salt solution was adjusted to that of the flume water by adding methanol and a red dye (KMnO4) was added to aid the visualization of the tracer cloud, the tracer was instantaneously injected into the flow as a full-depth vertical line source by the instantaneous injector and the initial concentration of the tracer was 100,000 mg/l. The secondary current as well as the primary flow pattern was analyzed to investigate the flow distribution in the meandering channels. The velocity distribution of the primary flow for all cases skewed toward the inner bank at the first bend, and was almost symmetric at the crossovers, and then shifted toward the inner bank again at the next alternating bend. Thus, one can clearly notice that the maximum velocity occurs taking the shortest course along the channel, irrespective of the flow conditions. The result of the tracer tests shows that pollutant clouds are spreading following the maximum velocity lines in each cases with various mixing patterns like superposition, separation, and stagnation of pollutant clouds. Flow characteristics in each cases performed in this study can be compared with tracer dispersion characteristics with using evaluation of longitudinal and transverse dispersion coefficients(LDC, TDC). As expected, LDC and TDC in meandering parts have been evaluated with increasing distribution and straight parts have effected to evaluate minimum of LDC and TDC due to symmetric flow patterns and attenuations of secondary flow.

• 한국지능시스템학회논문지
• /
• 제26권6호
• /
• pp.505-510
• /
• 2016

본 논문은 모바일 로봇의 SLAM(Simultaneous Localization and Mapping) 구현 시 사용되는 스캔매칭을 위한 회전오차에 강인한 대응점 탐색 기법을 제시한다. 많은 모바일 로봇의 연구에 차동구동방식의 구동부가 사용되는데, 이는 곡선 주행이나 제자리 회전을 위해 두 모터의 속력을 다르게 하거나, 반대 방향으로 제어하게 된다. 이러한 경우 직선 주행에 비해 비교적 바퀴의 미끄러짐 현상(Wheel Slip)을 심화시켜 모바일 로봇의 누적 위치 오차를 증가시키는 요인이 된다. 따라서 본 논문에서는 모바일 로봇의 회전 반경을 기반으로 최근접점을 추출하는 대응점 탐색 기법을 통해 스캔매칭 성능을 향상시키고자 한다. 제안된 방법의 검증을 위해 LRF(Laser Range Finder)를 이용해 실험을 진행하였으며, 기존 알고리즘에 주로 적용되는 유클리디안 최근접점 기반의 대응점 탐색 알고리즘과 비교한 결과, 제안된 대응점 탐색 기법이 보다 정확하게 대응점 집합을 추출하는 것을 확인했다.

• Weed & Turfgrass Science
• /
• 제5권2호
• /
• pp.101-104
• /
• 2016

2014년 7월부터 9월까지 경상남도 합천 지역의 크리핑벤트그래스(Agrostis stolonifera) 퍼팅 그린에서 Curvularia trifolii에 의한 Curvularia 잎마름병이 관찰되었다. Curvularia 잎마름병은 크리핑벤트그래스 잎몸에서 수침상으로 시작되어 진한 괴사반점으로 변한 다음, 크기가 확대되어 회갈색 또는 밝은 갈색의 동그란 타원형 병반이 되었다. 반점의 둘레는 자주 분홍 또는 진한 갈색의 경계를 갖으며 둥그런 무리(halo)를 보였다. 괴사 반점들은 융합되어 불규칙한 모양이 되었고 잎끝 또는 잎 전체가 말랐다. 마른 잎몸은 회백색이나 황갈색을 나타냈다. 그 균은 균학적 특성과 16S rDNA 서열 분석에 의해 동정되었다. 병원균의 분생포자는 크기가 짧았고, 보통 3개의 격막을 가졌으며, 곧거나 자주 휘었는데 양끝 세포는 일반적으로 가운데 세포보다 투명하였다. 3개의 격막을 지닌 분생포자의 배지상 크기는 $26{\sim}28{\times}11{\sim}12{\mu}m$였다. 기주에 대한 균의 인공접종으로 병원성이 확인되었다. 본 논문은 C. trifolii가 크리핑벤트그래스에 Curvularia 잎마름병을 일으키는 우리나라 최초의 보고이다.

• 한국전통조경학회지
• /
• 제38권2호
• /
• pp.31-41
• /
• 2020

전라남도의 선암사는 통일신라말에 창건된 이래 오늘날까지 호남의 대표적인 사찰로서 그 법통을 이어가고 있으나, 거듭되는 변화와 발전과정 속에서 전통사찰이 가지고 있어야 하는 경관적 정체성이 상당부분 훼손되었으며, 특히 일본양식이 도입되어 있어 경관의 원형상에 대한 회복이 시급한 상황이다. 실제로 선암사의 경우에는 한국전통사찰에서 나타나는 전통성있는 식재경관과는 상이하며, 정원요소들도 일본식에 가깝다고 할 수 있다. 이렇게 선암사의 원형경관이 변형된 원인 중 가장 중요한 것은 일제강점기에 일본인들에 의해 이루어진 변화와 1976년도에 있었던 조경사업으로 인한 변화라고 할 수 있다. 본 연구에서는 이러한 경관적 변화를 파악하고, 일본식 정원요소와 작정기법이 어떻게 나타나고 있는지를 파악함으로써, 선암사의 경관적 정체성을 파악하는 것이 연구의 주 목적이다. 연구의 방법으로는 문헌조사, 현장조사, 스님과의 인터뷰를 통해 진행하였으며 그 결과, 선암사는 일본의 조경양식으로부터 상당한 영향을 받은 것이 파악되었으며, 이러한 요소를 감추려다 오히려 더 일본식 경관이 연출되었다는 것도 알 수 있었다.

• 대한수의학회지
• /
• 제38권1호
• /
• pp.147-159
• /
• 1998

A survey of the internal parasites in 115 fishes of Ophicephalus argus was carried out in Kyungpook province during the period from January 1995 to November 1997. A species of trematode from the stomach and a species of nematode from the caeca of the fishes was discovered respectively. The trematode was identified as Azygia hwangtsinyi (Tsin, 1993) and the nematode as Pingus sinensis ($Hs\ddot{u}$, 1993). The fluke was pressed at thick of 0.1mm~0.2mm between slide glasses and fixed in 70% ethyl alcohol solution. The fluke was washed with tap water after fixation and stained with hematoxylin-carmin and mounted in balsam through routine methods. The nematode was fixed in 5% formalin solution and mounted with lactophnol or glycerine jelly. Morphology : Arygia hwantsinyi ; The fluke is elongate body with approximately parallel margins and rounded extremities in pressed preparations(Fig 1). The cuticle is unarmed. The oral sucker is ventro-subterminal in position. The ventral sucker is slightly smaller than oral sucker and positioned at 14.2% of body length from the oral sucker. The cirrus sac and genital pore is in mid-ventral line, slightly anterior to the ventral sucker. The oral sucker is succeeded by a well developed muscular pharynx. It is succeeded by a short inverted Y-shaped oesophagus. The inner wall of oesophagus is consisted of many fine folded membrane. The fine tubes of esophagus pass into the intestinal heads which are distended and presented a marked borderline between the fine tube and intestinal heads. The Intestinal heads start at level of pharynx and pass caudad in a zigzag course to end quite near caudal margin. The uterine coils occupy the intercecal area between the level of the cephalic margin of the ovary and about the level of the ventral sucker. The uterus is filled with many eggs. The testes are round or oval and placed one behind the other generally a little diagonally. The posterior testis is placed at level of 75.1% of body length. The ovary is oval, placed ahead the anterior testis. The shell gland not discernible outline is contacted with ovary ahead it. The vitelline glands are consisted of small oval vesicles. The vesicles occupy extracecal regions and between a little posterior of the ventral sucker and near caudal margin. Pingus sinensis : Female ; The cuticle is smooth and the cervical alae are well developed. The mouth opening is small, triangular, and without lips. The anterior end bears four sub-medial papillae. The oesophagus is divided into a muscular and glandular portion. The nerve ring is situated just at the junction of the muscular and glandular portions of the oesophagus. The vulva which has a prominent flap, is placed behind the middle of the body about one-third of the length of the worm from the posterior extremity. The vagina is strongly muscularised and after running anteriorly about $68{\mu}$, divides itself into two broad uterine tubes with an anterior and a posterior one. There are a few eggs in the uterine tubes. The tail is slender, straight and pointed. The ovary extends almost to the posterior extremity. Male : Male is smaller than female. The tail is pointed, curved and carrying well-developed caudal alae. A prominent muscular precloacal sucker is characteristic. The spicules are equal and short. There are four pairs of pedunculated pre-anal papillae, of which the most anterior pair are situated just at the level anterior to the muscular sucker. Two pairs of pedunculated papillae are present before the anus. There are five pairs of post-anal papillae of which the most anterior pair and the second counted from the posterior end are ventral and more marked than the ones which are situated laterally.