• 한국수자원학회논문집
• /
• 제31권3호
• /
• pp.269-277
• /
• 1998

본 연구에서는 수리실험을 실시하여 만곡부의 흐름특성과 만곡부에서의 교각 주위 국부세굴형상, 최대 국부세굴심 등을 분석하였다. 또한, 기존의 세굴보호공법 중 원환에 의한 보호공법을 만곡부에 적용하여 세굴감소효과를 분석하였다. 180' 만곡수로에 대해 이동상 실험결과 본 실험조건에서는 최대 횡방향 하상경사가 150' 단면에서 발생하였으며, 원환에 의한 세굴감소효과는 유로 직선부에서 최대 40%, 만곡부에서는 150' 단면 외측의 경우 최대 44%의 감소효과를 보였다. 폭이 교각폭에 2배인 원환에 대하여 실험한 결과, 유로 직선부에서는 원환을 .02h(여기서 h는 수심)만큼 하상저면에 설치하였을 때 가장 효과적이었으며, 유로 만곡부에서는 0.1h 만큼 하상저면에 설치하였을 때 가장 효과적이었다.

• Journal of Korean Neurosurgical Society
• /
• 제49권2호
• /
• pp.102-106
• /
• 2011

Objective : Although there are several explanations for a duplicated middle cerebral artery (DMCA), its embryological origin is still an open question. We reviewed these anomalous vessels to postulate a theory of their different origins, sizes, and courses. Methods : A retrospective review of 1,250 cerebral angiographies, 1,452 computed tomography (CT)-angiographies, and 2,527 magnetic resonance (MR)-angiographies was performed to identify patients with DMCA. Results : Twenty-five patients had 25 DMCAs. Conventional angiography detected nine patients with DMCA (9/1250, 0.72%), MR-angiography detected seven patients with DMCA 0.28%), and CT-angiography detected nine patients with DMCA (9/1452, 0.62%). The DMCAs originated near the internal carotid artery terminal in eight patients (type A), and between the origin of the anterior choroidal artery and the terminal internal carotid artery in 17 patients (type B). The diameters of the eight type A DMCAs were the same or slightly smaller than those of the other branch of the DMCA. All type A DMCAs showed a course parallel to that of the other branch of the DMCA. The diameters of the 17 type B DMCAs were the same, slightly smaller, or very much smaller than that of the other branch of the DMCA. Nine type B DMCAs showed parallel courses, and the other eight curved toward the temporal lobe. Conclusion : The two branches of the type A DMCAs can be regarded as early bifurcations of the MCA. The branches of the type B DMCAs had parallel courses or a course that curved toward the temporal lobe. The type B DMCA can be regarded as direct bifurcations of the MCA trunk or the early ramification of the temporal branch of the MCA.

• 대한관절경학회지
• /
• 제16권2호
• /
• pp.128-133
• /
• 2012

목적: 이중 다발 전방십자인대 재건술 후 이식건의 자기공명영상(magnetic resonance imaging, MRI) 추시 소견과 안정성과의 관계를 알아보고자 하였다. 대상 및 방법: 1.5 테슬라 자기공명영상을 이용하였으며, 이식건의 신호 강도는 Sonoda 등의 분류를 이용하여 1, 2, 3 등급으로 분류하였고, 주행은 직선과 곡선으로 분류하였다. 전방 안정성은 Lachman, KT 관절계, $30^{\circ}$ 전방 전위 방사선 검사로, 회전 안정성은 pivot shift 검사로 평가하였다. 이식건의 자기공명영상 소견과 안정성의 상관 관계를 평가하였다. 결과: 신호 강도는 전내측 다발이 1 등급 66.7%, 2 등급 26.7%, 3 등급 6.7%였고, 후외측 다발이 1 등급 63.3%, 2 등급 33.3%, 3 등급 3.3%였다. 주행은 전내측 다발이 직선 83.3%, 곡선 16.7%였고, 후외측 다발이 직선 86.7%, 곡선 13.3%였다. 전내측 다발의 주행은 전방 안정성과 관련이 있었고, 후외측 다발의 주행은 회전 안정성과 관련이 있었다. 신호 강도는 안정성과 관련이 없었다. 결론: 이중 다발 전방 십자 인대 재건술 후 이식건의 자기공명영상 추시 소견과 안정성과의 관계에서 전방 안정성 면에서는 전내측 다발의 주행이, 회전 안정성 면에서는 후외측 다발의 주행이 관련이 있었다.

• 플랜트 저널
• /
• 제8권2호
• /
• pp.52-58
• /
• 2012

Pipe means the connection of the tube in order to transfer fluid from one device to another device. The piping stress analysis is to analyze the structural stability considering the location and the features of piping support after completing the piping design, The allowable stresses comply with the requirements of the relevant standards by examining whether the support of the function and location of pipe or re-operation is confirmed. Allowable stresses are to make sure that the maximum stress should not exceed the allowable stress presented in the ASME B31.1 POWER PIPING code. ASME B31.1 POWER PIPING code ensures a smooth stress analysis can be performed during the initial pipe stress analysis as provided in the case of straight pipe to the horizontal distance between the supports. However, because there is no criteria set in the case of curved pipe, the optimum pipe supporting points were studied in this paper. As mentioned about the curved pipe, loads applied to the support of the position of 17% and 83% of the position relative to the elbow part have results similar to the load acting on the support of straight pipe.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.102-109
• /
• 2016

The hydrodynamic interaction between two large vessels can't be neglected when two large vessels are closed to each other in restricted waterways such as in a harbor or narrow channel. This paper is mainly concerned with the ship maneuvering motion based on the hydrodynamic interaction effects between two large vessels moving each other in curved narrow channel. In this research, the characteristic features of the hydrodynamic interaction forces between two large vessels are described and illustrated, and the effects of velocity ratio and the spacing between two vessels are summarized and discussed. Also, the Inchon outer harbor area through the PALMI island channel in Korea was selected, and the ship maneuvering simulation was carried out to propose an appropriate safe speed and distance between two ships, which is required to avoid sea accident in confined waters. From the inspection of this investigation, it indicates the following result. Under the condition of $SP_{12}{\leq}0:5L$, it may encounter a dangerous tendency of grounding or collision due to the combined effect of the interaction between ships and external forces. Also considering the interaction and wind effect as a parameter, an overtaken and overtaking vessel in narrow channel can navigate while keeping its own original course under the following conditions; the lateral separation between two ships is about kept at 0.6 times of ship length and 15 degrees of range in maximum rudder angle. On the other hand, two ships while overtaking in curved narrow channel such as Inchon outer harbor in Korea should be navigated under the following conditions; $SP_{12}$ is about kept at 1.0 times of ship length and the wind velocity should not be stronger than 10 m/s.

• 한국수자원학회논문집
• /
• 제37권7호
• /
• pp.527-540
• /
• 2004

다중 만곡부에서의 주흐름과 이차류의 흐름 특성을 분석하기 위하여 중심각 120$^{\circ}$인 두 개의 만곡부로 이루어진 사행수로에서 실험을 수행하였다. 실험수로의 횡단면은 직사각형과 곡선형 두 가지 형태로 제작하였으며, 곡선형 단면 형상 결정에는 베타함수를 이용하였다. 3차원 유속장의 측정은 micro-ADV를 이용하였다. 실험결과, 직사각형 수로에서 주흐름은 수로의 가장 짧은 경로를 따라 발생하였으며, 이는 기존 연구자들의 결과와 일치한다. 곡선형 수로에서도 주흐름이 직사각형 수로에서의 주흐름의 거동과 비슷한 양상을 보이는 것으로 밝혀졌다. 곡선형 수로에서의 실험결과가 실제 자연하천의 만곡부에서의 주흐름 거동(최심선을 따라 발생)과 상이하게 나타나는 이유는 실험수로의 바닥 조도와 사행도에 기인한 것으로 사료된다. 이차류의 정량적인 분석을 위하여 흐름함수를 도입한 결과, 만곡부에서 주 셀 뿐만 아니라 바깥제방 셀의 위치 및 형태를 확인할 수 있었다. 또한 이차류 강도를 계산한 결과, 직사각형 및 곡선형 수로에서 최대값은 두 번째 만곡부의 정점 부근에서 가장 크게 나타나며 곡선형 수로의 이차류의 강도가 직사각형 수로의 값보다 크게 나타나고 있음을 알 수 있었다. 직사각형 수로의 경우, 하폭 대 수심비가 커질수록 이차류의 강도가 증가하고 있음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2541-2544
• /
• 2003

새로운 원리에 의한 원격 거리 및 각도측정 시스템［1］［2］(이하 TS, Total Station)을 개발하였다. 본 시스템은 마이크로 터널링 공법의 굴진기의 후미 또는 임의의 기준점에 원격으로 점멸할 수 있는 십자형의 발광체를 부착하고, 추진관에 고정시킨 상하좌우 각도측정 및 비접촉식 레이저 거리측정기가 부착된 무인 원격 제어장치에 의하여 십자형 발광체의 중심을 자동으로 검출한다. 또한. 회전각과 CCD 라인 스캔 센서의 조합에 의하여 각도를 정밀하게 원격 측정하게 된다. 한편 본 시스템을 이용하면 마이크로 터널링 공법에 의한 추진관내의 측정 가능한 범위를 연결하는 위치에 복수의 TS를 배치하여 서로의 위치를 자동으로 계측하고 그들 데이터를 컴퓨터에 의하여 계산함으로써, 맨홀의 임의의 기준점으로부터 굴진기의 현재 좌표를 신속하고 정확하게 계산할 수 있다.

• Journal of Chest Surgery
• /
• 제23권4호
• /
• pp.758-763
• /
• 1990

A congenital fistulous communication between the coronary artery and the cardiac chamber or the pulmonary artery is a rare condition, but increasing cases with this anomaly are being recognized with wide spread use of cardiac catheterization and coronary arteriography. Recently we experienced one case of right coronary artery fistula which was associated with atrial septal defect. The patient was a 24 year old female who was admitted because of cardiac murmur, palpitation and dyspnea on exertion after pregnancy. Cardiac catheterization and selective coronary arteriography revealed that a fistulous communication, forming a large aneurysm, was noted from the right coronary artery emptied into the right ventricle. On the operation field, the right coronary artery was curved and markedly dilated from the aorta to the middle segment at acute margin of the right ventricle. The egg-sized aneurysm of dilated right coronary artery was noticed on right ventricle. The aneurysm was incised longitudinally and both the proximal opening and the termination site of the fistula were closed directly with aneurysmectomy. The right atrium was also opened to evaluate the fistulous termination site and repaired only small interatrial septal defect. Postoperative course was uneventful and she was discharged without problems

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.404-409
• /
• 2005

The reinforced concrete blocks for reinforced earth layer are combined with soil structures consisted of facing unit, reinforcing materials and soil. Those environmentally friendly facing units of reinforced concrete blocks are made of mine waste and tailing and that will be played a role of the effects of recycling use of wasted resources. The block are consisted of three types as curved or straight in order to control topography. The systems are also not limited to wall hight so that they are effectively used for protecting the slope of banking and cutting of earth works. The reinforced concrete blocks developed this time will be effectively applied for not only retaining wall, road, park, golf course, public office building constructions but also protecting of slope stabilization projects.

• Archives of Plastic Surgery
• /
• 제38권1호
• /
• pp.105-108
• /
• 2011

Purpose: An extensive knowledge of the arterial anatomy of the upper extremity and its variations is indispensable to the hand surgeon. We report a patient with anomalous radial artery, superficial course of two radial arteries, encountered during the excision of volar wrist ganglion. Methods: The patient was a 53-year-old man who had a painful mass on the left volar wrist for 1 year. Under general anesthesia, a curved incision was made around the mass. With the skin flaps retracted, the dome of the cyst was identified. Particular care was taken to identify and protect the radial artery, which was intimately attached to the wall of the ganglion. Two radial arteries completely encircled the ganglion. The pedicle was traced to the volar joint capsule, radiocarpal ligament. The joint was open and the capsular attachments were excised. Results: The patient made an uneventful recovery. There were two arterial pulsations at the volar side of the wrist joint. Compressing this site revealed that the major arterial contributor to blood supply in the hand was the ulnar artery. At angioCT, an anomaly of the radial artery was found with a duplication. The pathway of this aberrant artery was superficial to the original radial artery. It changed its course subcutaneously at the level of the tendon of the brachioradialis muscle, and crossing the wrist lateral to the original radial artery and ending in the deep palmar arch. Conclusion: Authors experienced a case of bifurcating radial artery encountered during the excision of ganglion on the volar of the wrist. Because these duplicated radial arteries make strong contributions to the thumb and index finger as well as to the deep palmar arch, when they are present there may be probably less blood supply to the hand from the ulnar artery. If the radial artery is palpated superficially on the brachioradialis muscle, it is important to remember the kind of anomaly.