• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1791-1796
• /
• 2005

Semi-shield tunneling is one of the propulsion construction methods used to lay pipes underground between two pits named 'entrance' and 'destination', respectively. Usually a simple composition, such as 'a fiducial target at the entrance+a total station (TS)+a target on the machine', is used to confirm the planned course. However, unavoidable curved sections are present in small-sized pipe lines, which are laid after implementation of a road system, for public works such as waterworks, sewer, electrical power, and gas and communication networks. Therefore, if the planned course has a curved section, it is difficult to survey the course with the abovementioned simple composition. This difficulty could be solved by using the multiple total stations (MTS), which attaches the cross type linear LED target to oneself. The MTS are disposed to where each TS can detect the LED target at the other TS or the base point or the machine. And the accurate relative positions between each MTS and target are calculated from measured data. This research proposes the relative and absolute coordinate calculation algorithm by using three MTS to measure a curved course with 20m curvature at 30m maximum distance, and verifies the algorithm experimentally.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.631-638
• /
• 2003

Yaw-checking and course-keeping ability in IMO's ship manoeuvrability standards are reviewed from the viewpoint of safe navigation. Three kinds of virtual series-ships, which have different course instability, are taken as test models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability in spiral characteristics and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in a curved, narrow waterway by six operators(five active pilots and one ex-captain) in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. IMC criteria for yaw-checking and course-keeping ability are discussed and revised criteria are proposed.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2002년도 춘계학술대회논문집
• /
• pp.3-10
• /
• 2002

Yaw-checking and course-keeping ability in IMO's ship manoeuvrability standards is reviewed from the viewpoint of safe operation. Three types of assumed series-ships, which have systematically different instability on course, are taken as tested models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in situation of curved, narrow of waterway by five pilots in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. Three kinds of IMO's criterion concerning yaw-checking and course-keeping ability are discussed and new criteria are proposed.

• 한국항행학회논문지
• /
• 제18권4호
• /
• pp.288-295
• /
• 2014

현재 사용 중인 계기착륙장치(ILS)는 시스템 특성상 동시에 다수의 입항하는 항공기가 사용하기 어렵고, 활주로 방향별로 장비들이 설치되어야 한다. 또한 착륙하는 항공기들이 일정한 구역에서 단일 비행경로만으로 착륙절차가 구성되어야 한다는 한계점이 있다. 이에 항공 교통량이 증가하게 된다면 입항하는 항공기들의 체공 시간이 더욱 증가하게 될 것이다. 이러한 한계점을 보완하기 위해 GNSS를 이용한 착륙시설로 GBAS가 개발 되었다. 본 논문에서는 비행시험 전 시뮬레이터를 이용하여 태안 비행장에서 실제 사용 하고 있는 항공기 착륙절차와 Curved approach를 이용한 절차를 비교 하였다. 비교 결과 Curved approach 절차를 이용하게 되면 기존절차보다 비행시간이 감소되어 연료 및 소음공역회피 등과 같은 효과가 일어 날 수 있을 것으로 판단된다.

• Journal of Ship and Ocean Technology
• /
• 제6권3호
• /
• pp.26-36
• /
• 2002

Yaw-checking and course-keeping ability in IMO's ship rnanoeuvrability standards is reviewed from the viewpoint of safe navigation. Three kinds of virtual series-ships, which have different course instability, are taken as test models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability in spiral characteristics and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in a curved, narrow waterway by five pilots in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. IMO criteria for yaw-checking and course-keeping ability are discussed and new criteria are proposed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 춘계학술발표회 논문집
• /
• pp.101-110
• /
• 1998

The safe passing maneuver of a large vessel along the designed course through a narrow channel in the flow of strong current is greatly related with her maneuvering characteristics. This paper treats maneuvering characteristic of a large vessel changing her course with the use of her control surface in a narrow channel with strong current. In this paper, the author proposed mathematical models of calculating maneuvering motions of the very large LNG tanker altering course using her control surface and calculated passing tracks of the vessel through the channel and compared the calculated results with those of maneuvering simulations by a desk-top simulator. In general the motions with the calculated values and the simulated motions are well coincided with each other.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.67-73
• /
• 2010

A simplified finite element analysis has been used to predict the weld-induced deformation to bead-on-plate welding of steel plates having curvatures in the welding direction. In this study, the equivalent loading method based on inherent strain was used to investigate the effect of longitudinal curvature on the weld-induced deformation of curved plates. Equivalent loads were derived from the inherent strain distribution around the weld line, and the loads were used for linear finite element analyses. These kinds of numerical simulations can, of course, be performed by using the rigorous thermalelastic-plastic analysis method. This approach is not, however, practical for use in weld-induced deformation analysis of large and complex structures, such as ship structures, in view of computing time and cost. The present equivalent load approach has been applied to several plate models having curvatures in the welding direction, and the results are compared with those obtained by thermal-elastic-plastic analysis and also with those obtained by the other simplified method found in reference. As far as the present results are concerned, the weld-induced deformation of curved plates can be accurately predicted by the method presented in this paper.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.891-898
• /
• 2003

Unmanned remote survey system is proposed to measure distance and angle of the present position of micro-tunneling machine from any starting point of entrance. Cross type linear LED that can be controlled remotely is attached to the tunneling machine. Range finder and angle measuring devise fixed to internal of the pipe can scan the center of LED. Distance and angle measuring devises are disposed in the measurable position of the pipe, then the present position of tunneling machine can be calculated automatically from the measurements.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.439-444
• /
• 2004

A new efficient intelligent machining strategy named the Steepest Directed Tree method is presented in this study, which makes surface model discrete with triangulation meshes and the cutter paths track along the tree directions. In order to formulate these algorithms practically, it is deduced the multi-stage machining approach of uncut volume caused by cutter gouging in the course of milling using flat end mill. It is systematized the checking process the cutter interference by grouping the 6 kinds of gouging types, which yields the environment of connectivity data lists including CL-data, and then the multi-stage machining strategy, that minimizes uncut area by continuously sequencing the generative subsequent CL-paths, is shamed to determine the second tool path for the next uncut area and to compose the operating multi-stage cutting processes. The completed machining system of curved surfaces is evaluated by testing the practical machining experiments which have various kinds of shape conditions.

• 대한인간공학회지
• /
• 제35권1호
• /
• pp.11-27
• /
• 2016

Objective: The purpose of this study was to develop and evaluate high technology adaptive driving controls, such as mini steering wheel-lever system and joystick system, for the people with physical disabilities in the driving simulator. Background: The drivers with severe physical disabilities have problems in operation of the motor vehicle because of reduced muscle strength and limited range of motion. Therefore, if the remote control system with driver-by-wire technology is used for adaptive driving controls for people with physical limitations, the disabled people can improve their quality of life by driving a motor vehicle. Method: We developed the remotely controlled driving simulator with drive-by-wire technology, e.g., mini steering wheel-lever system and joystick system, in order to evaluate driving performance in a safe environment for people with severe physical disabilities. STISim Drive 3 software was used for driving test and the customized Labview program was used in order to control the servomotors and the adaptive driving devices. Thirty subjects participated in the study to evaluate driving performance associated with three different driving controls: conventional driving control, mini steering wheel-lever controls and joystick controls. We analyzed the driving performance in three different courses: straight lane course for acceleration and braking performance, a curved course for steering performance, and intersections for coupled performance. Results: The mini steering wheel-lever system and joystick system developed in this study showed no significant statistical difference (p>0.05) compared to the conventional driving system in the acceleration performance (specified speed travel time, average speed when passing on the right), steering performance (lane departure at the slow curved road, high-speed curved road and the intersection), and braking performance (brake reaction time). However, conventional driving system showed significant statistical difference (p<0.05) compared to the mini steering wheel-lever system or joystick system in the heading angle of the vehicle at the completion point of intersection and the passing speed of the vehicle at left turning. Characteristics of the subjects were found to give a significant effect (p<0.05) on the driving performance, except for the braking reaction time (p>0.05). The subjects with physical disabilities showed a tendency of relatively slow acceleration (p<0.05) at the straight lane course and intersection. The steering performance and braking performance were confirmed that there was no statistically significant difference (p>0.05) according to the characteristics of the subjects. Conclusion: The driving performance with mini steering wheel-lever system and joystick control system showed no significant statistical difference compared to conventional system in the driving simulator. Application: This study can be used to design primary controls with driver-by-wire technology for adaptive vehicle and to improve their community mobility for people with severe physical disabilities.