• Title/Summary/Keyword: curve ratio inflection point

Search Result 15, Processing Time 0.017 seconds

Proposal of a New Design Method of the Pile-Bent Structure Considering Plastic Hinge (단일 현장타설말뚝의 소성힌지를 고려한 최적설계법 제안)

  • Ahn, Sang-Yong;Jeong, Sang-Seom;Kim, Jae-Young
    • Journal of the Korean Geotechnical Society
    • /
    • v.27 no.2
    • /
    • pp.91-101
    • /
    • 2011
  • In this study, a new design method of Pile-Bent structure considering plastic hinge was proposed on the basis of the beam-column model. To obtain the detailed informations, the optimized cross-section ratio between column and pile was analyzed to induce the plastic hinge at the joint section between the pile and column. Base on this study, the optimized diameter ratio of pile and column can be obtained below the inflection point of the bi-linear curve depending on the relations between column-pile diameter ratio ($D_c/D_p$) and normalized lateral cracking load ratio ($F/F_{Dc=Dp}$). Moreover, through comparisons with field cases to find out in-depth limit in which minimum concrete-steel ratio could be applied, in-depth limits ($L_{As=0.4%}$) normalized by the pile length ($L_p$) proportionally decrease as the pile length ($L_p/D_p$)increases up to $L_p/D_p=17.5$, and beyond that in-depth limit converges to a constant value (${\simeq}0.3$).

The Studies of Low Temperature Dyeing on Silk Fibers I. Low Temperature Dyeing of Silk Fiber in the Milling Type Acid Dye (견의 저온 염색에 관한 연구 I. 산성 Milling형 염색에 있어서의 저온염색)

  • 배도규;배현석;정태암
    • Journal of Sericultural and Entomological Science
    • /
    • v.34 no.2
    • /
    • pp.52-57
    • /
    • 1992
  • Using the new type auxiliary(K-1), dyeing experiment was done at the various dyeing conditions and the effects of auxiliary on the dyeing properties of acid milling dye for the silk fiber were dicussed. The results obtained were as follows; 1. The exhaust rate of acid milling dye was increased according to the auxiliary concentration at dyebath pH 7, But the increasing tendency of exhaust rate was decreased above auxiliary concentration 3% o. w. f.. 2. It was the same tendency of exhaust rate at dyebath pH 5, but the diffusion was more powerful at dyebath pH 7 than pH 5. 3. The decreasing ratio of exhaust rate according to dye concentration increasing was lower at auxiliary addition than auxiliary non-addition. 4. The exhaust rate curve according to increasing dyeing temperature showed the inflection point at auxiliary non-addition, but it was not observed in auxiliary addition. Consequently, it seems to be avoid that the occurrence of uneven dyeing at auxiliary addition.

  • PDF

Analysis of Efficiency of Suction Board Drain Method by Step Vacuum Pressure (단계석션압 조건에 따른 석션보드드레인 공법의 효율 분석)

  • Kim, Ki-Nyun;Han, Sang-Jae;Kim, Soo-Sam
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.6C
    • /
    • pp.321-329
    • /
    • 2008
  • In this study, a series of column test as a way in order to make up for the weakness point of the conventional acceleration method were conducted to both propose the suction board drain method and grapes the specific improvement character of this method as a result of a sort of plastic drain board and a phase of vacuum pressure conditions. On this occasion, the study focused on computing the effective factors of the fittest Suction board drain method affected by each condition through confirming the settlement generated during the test, the water content reduction and stress increase effect occurred arising from the test, and the ratio of consolidation related to the improvement period. In accordance with the shape of core and that whether the core is attached to the filter(pocket or adhesion), the castle type of adhesion and the column type of pocket are more efficient than the others as a consequence of the test to find out the improvement effect depending on each drainage such as a castle type, coil type, harmonica type, column type of pocket and a castle of the adhesion. In case of the step suction pressure, the shorter the period of $-0.8\;kg/cm^2$ as a final step of the suction pressure is, the better the improvement is. In addition, the correlation between degree of consolidation per each suction pressure level and duration of application was drawn as a curve and the point of inflection on this curve was provided to determine the duration period to maximize the consolidation.

Growth curve estimates for wither height, hip height, and body length of Hanwoo steers (Bos taurus coreanae)

  • Park, Hu-Rak;Eum, Seung-Hoon;Roh, Seung-Hee;Sun, Du-Won;Seo, Jakyeom;Cho, Seong-Keun;Lee, Jung-Gyu;Kim, Byeong-Woo
    • Korean Journal of Agricultural Science
    • /
    • v.44 no.3
    • /
    • pp.384-391
    • /
    • 2017
  • Growth curves in Hanwoo steers were estimated by Gompertz, Von Bertalanffy, Logistic, and Brody nonlinear models using growth data collected by the Hanwoo Improvement Center from a total of 6,973 Hanwoo (Bos taurus coreanae) steers 6 to 24 months old that were born between 1996 and 2015. The data included three parameters: A, mature size of body measurement; b, growth ratio; and, k, intrinsic growth rate. Nonlinear regression equations for wither height according to Gompertz, Von Bertalanffy, Logistic, and Brody models were $Y_t=144.7e^{-0.5869e^{-0.00301t}}$, $Y_t=145.3(1-0.1816e^{-0.00284t})^3$, $Y_t=143.1(1+0.7356e^{-0.00352t})^{-1}$, and $Y_t=146.8(1+0.4700e^{-0.00249t})^1$, respectively, while those for hip height were $Y_t=144.5e^{-0.5549e^{-0.00312t}}$, $Y_t=145.0(1-0.1724e^{-0.00295t})^3$, $Y_t=143.1(1+0.6863e^{-0.00360t})^{-1}$, and $Y_t=146.2(1+0.4501e^{-0.00263t})^1$, respectively. Equations for body length $Y_t=174.1e^{-0.8342e^{-0.00289t}}$, $Y_t=175.8(1-0.2500e^{-0.00265t})^3$, $Y_t=170.0(1+1.1548e^{-0.00363t})^{-1}$, and $Y_t=180.3(1+0.6077e^{-0.00215t})^1$, respectively, for the same models. Among the four models, the Brody model resulted in the lowest mean square error, with mean square errors of 31.79, 30.57, and 42.13, respectively, for wither height, hip height, and body length. Also, an estimated birth wither height, birth hip height, and birth body length (77.98, 80.57, and 70.97 cm, respectively) were lower in the Brody model than in other models. An inflection point was not observed during the growth phase of Hanwoo steer according to the growth curves calculated using Gompertz, Von Bertalanffy, and Logistic models. Based on the results, we concluded that the regression equation using the Brody model was the most appropriate among the four growth models. To obtain more accurate parameters, however, using data from a wider production period (from birth to shipping) would be required, and the development of a suitable model for body conformation traits would be needed.

The Study of Relationship between Berm Width and Debris Flow at the Slope (사면에서 토석류와 소단폭의 관계성에 관한 연구)

  • Kim, Sungduk;Oh, Sewook;Lee, Hojin
    • Journal of the Korean GEO-environmental Society
    • /
    • v.14 no.11
    • /
    • pp.5-12
    • /
    • 2013
  • The purpose of this study is to estimate the behavior and the mechanism of debris flow at the end of mountain side when a berm was set on the inclined plane. The numerical model was performed by using the Finite Difference Method(FDM) based on the equation for the mass conservation and momentum conservation. In order to measure the behavior of the debris flow, the debris flow of a straight channel slope and the debris flow of channel slope with 3 types of berms were compared. First, the flow discharge and the sediment volume concentration at the downstream of the channel slope, depending on the various berm width and the different inflow discharges at the upstream of the channel were analyzed. The longer the berm width, the flow discharge at the downstream of the channel was decreased and the high flow fluctuation was reduced by a berm. And it means that a berm can effect for the delay of the debris flow. Through Root Mean Square ratio(RMS) comparison, the flow discharge of the channel slope with a berm was lower than that of a straight channel slope. The longer the berm width, for the sediment volume concentration, an inflection point did not show but mild curve. Because the low sediment concentration with water mixture by a berm continuously flow at the downstream end, it will be effect for reducing the disaster caused by debris flow. The results of this study will provide useful information in predicting and preventing disaster caused by the debris flow.