• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.323-335
• /
• 1998

Clinically, the curve of Spee is widely applied as a determined level of the occlusal curvature when the oral rehabilitation and the reconstruction of the prosthesis is needed at the malalignment dentition due to the missing, extrusion, and the inclination of the teeth. The purpose of this study was to analyze the curve of Spee of the occlusal curvature which influences to the occlusal form and the location three dimensionally, and then was to measure the radius and the degree of curvature of the curve of Spee and also was to investigate the influence to the cuspal inclination according to the change of the inclination of the curve of Spee which was analyzed by AutoCAD R.13 program at the gnathological cast and the cephalometric radiograph. The following results were obtained : 1. The radius of the curve of Spee was the mean of $11.74{\pm}3.64cm$ in the model, $12.75{\pm}4.63cm$ in the radiograph and there was no significant difference statistically between the model and the radiograph(P>0.001). 2. The radius and the degree of curvature of the curve of Spee showed negative correlation(r=-0.80), while the radius and the degree of curvature of the curve of Spee in relation to the length of the curve of Spee did not show correlation. 3. The case of the curve of Spee inclined to the posterior, that is. $Post.M{\theta}$ group showed the mean of $4.73{\pm}3.64$, positive correlation to the P2m, M1mm, M1dm, M2dm, and especially the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.70). 4. The case of the curve of Spee inclined to the anterior, that is, $Ant.M{\theta}$ group showed the mean of $3.28{\pm}3.59$, positive correlation to the P2m, M1mm, and also the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.78

• 구강회복응용과학지
• /
• 제30권2호
• /
• pp.93-101
• /
• 2014

목적: 본 연구의 목적은 한국인에서 스피만곡의 전형적인 형태와 성별, 연령, 좌우측에 따른 스피만곡을 분석하는 것이다. 연구 재료 및 방법: 콘빔형 단층촬영을 한 원광대학교 치과대학 산본치과병원 환자 중에서 본 연구의 기준에 합당한 500명(남자: 311, 여자: 189)의 이미지를 선정하였고, 스피만곡을 시상면 상에서 분석하였다. 결과: 한국에서 스피만곡 평균 반경은 91.4 mm였다. 스피만곡 반경의 성별에 의한 통계학적 유의성은 있었으나, 연령과 좌우간의 유의성은 보이지 않았다. 결론: 본 연구의 제한적 상황 내에서 몬슨에 의해서 주창되었던 101.6 mm보다 더 적은 한국인의 스피만곡의 반경은 특히 한국인에서 교합평면을 재건할 경우 모든 경우에서 스피만곡 수치를 그대로 적용하는 것을 재고해 볼 필요성을 제기한다.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.731-740
• /
• 1998

이전의 preadjusted appliance 개발을 위한 치관경사도의 계측에 있어서는 교합평면을 계측기준으로 사용했는데, 교합평면은 Spee 만곡으로 인해 브라켓 부착점들을 연결하는 선(Andrews' plane)에 평행하지 않은 문제점이 있었다. 따라서 본 연구에서는 Spee 만곡에 영향받지 않으며, Andrews' plane에 보다 평행한 계측기준으로 각각의 구치의 근, 원심측 변연융선을 잇는 가상선을 설정하고, 이를 변연융선평면으로 명명하였다. 교합평면과 변연융선평면으로부터 각각 정상교합자의 구치부 치관경사도를 계측하여 비교한 결과 교합평면을 기준으로 한 치관경사도가 특히 상, 하악 제 1소구치(P<0.05) 및 제 2대구치(P<0.01)에서 Spee 만곡의 영향을 받음을 발견하였다. 구치부 치아들의 치관경사도는 Spee 만곡의 양에 따라 변해야만 인접치간 변연융선의 불일치가 생기지 않는다. 이전의 연구들에서는 다소의 Spee만곡을 갖는 정상교합자 표본에서 교합평면을 기준으로 계측한 치관경사도를 Spee 만곡이 없는 교합평면이 치료 목표의 일부인 bracket system에 적용하는 오류가 있었다. 이러한 치관경사도와 Spee 만곡 사이의 부조화는 Spee만곡이 straight wire에 의해 완전히 leveling되었을 때 변연융선 불일치를 초래할 수 있다. 이를 해결하기 위해서는 구치부 브라켓 slot이 변연융선평면에 평행하도록 브라켓 경사도를 결정하는 것이 추천된다.

• 대한치과교정학회지
• /
• 제23권4호
• /
• pp.485-492
• /
• 1993

Multiloop Edgewise Archwire(MEAW) is effective in relief the Curve of Spee in mandibular arch but up Sl down orthodontic elastics must be used with it. The purpose of this study was to analyse the effect of orthodontic elastics, like as up & down elastics, Class II elastics, and Class III elastics, and the effect of L loop in Multioop Edgewise Archwire. 1. Intrusive force of MEAW in anterior teeth was reduced and uprighting force in premolars was increased by up & down elastics. 2. Uprighting force was significintly increased with Class III elastics in multiple L loop arch wire. 3. The force of Class II elastics made molars tip mesially and Curve of Spee deep.

• 대한치과의사협회지
• /
• 제45권8호통권459호
• /
• pp.483-490
• /
• 2007

The aim of this study was to investigate the relationship between the mandibular antegonial notch and the mandibular morphology, and the curve of Spee in anteroposterior skeletal relationship. Pre-treatment lateral cephalograms were obtained from 80(male 34, female 46) adult orthodontic patients and the samples were classified into 3 categories by ANB angle($0^{\circ}$$\leq$ANB< $4^{\circ}$ Class I, $4^{\circ}$$\leq$ANB Class II, ANB< $0^{\circ}$ Class III). The curve of Spee was measured directly from the pre-treatment mandibular study cast of each patient included in this study. Pearson correlation coefficient test and multiple regression analysis in each group revealed the following results; 1. Antegonial notch depth was positively correlated with hoth lower anterior facial height(ANS-Me) in skeletal Class I, II and III groups and Id-Me height in skeletal Class I and II groups. 2. A statistically significant negative correlation was found between the depth of the antegonial notch and the curve of Spee in the Class III group. 3. Significant relationship was not found between the antegonial notch depth and any of the other cephalometric variables such as mandibular body length(Go-Gn) and ramus height(Co-Go). As antegonial notch depth increased, more vertical growth of the mandible was observed. Antegonial notch can be used as a predictor of vertical mandibular growth in the diagnosis and treatment planning of malocclusion.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.95-122
• /
• 1990

This study was done to analyze the occlusal curve as one of the factors to be considered for maintenance of occlusal stability in the orthodontic and prosthodontic treatments. Sixty gnathological casts we.e obtained from 43 subjects with normal occlusion and 17 subjects with some of temporomandibular disorders. The occlusal surfaces of gnathologic casts were duplicated by using a Color kit SK-700 and tile reference points of X, Y coordinates were digitized by using the Summagraphic digitizer and 18AT computer system. The Z coordinates of cusp height were measured by 0.01mm measurable caliper. The mathematical computer program of least square method was used to analyze the occlusal curve arranged by three dimensional coordinates of X, Y, Z. The following results were obtained : 1. The occlusal curve of buccal and lingual cusp tips was fitted to the ellipse, and the occlusal curve of anterior teeth was fitted to a part of the circle in the analysis of conic sections. 2. The radius of Spee's curve showed individual differences, but was average 98.7mm in male subjects and 93.7mm in female subjects. 3. The radius fo Spee's curve according to the half of canine width showed the least coefficient of variation. 4. The radius of Spee's curve was not significantly relative to the lateral occlusal contacts on laterotrusion and the absence or presence of temporomandibular disorders. 5. The radius of Wilson's curve showed individual difference and the size of radius was followed by the order of 1st premolar, 2nd premolar, 2nd molar and 1st molar.

• 대한치과교정학회지
• /
• 제34권1호
• /
• pp.1-11
• /
• 2004

치열궁내의 공간 부조화를 단순히 가용 arch perimeter에 대한 tooth material의 총합의 차이만으로 예측하는 것은 치아의 이동을 단지 평면적으로만 해석한 것인 반면, 실제로 치아는 치료에 의해 3차원적으로 움직이게 되어 치열궁 형태와 curve of Spee의 정도 그리고 치축 각도와 경사에도 영향을 받게 된다. 본 연구는 교정환자의 치료전 모형분석시 치열궁내 공간 부조화를 보다 분석적으로 평가하기 위해 소구치 발치 후 arch perimeter의 감소와 전치부의 전후방적인 이동량간의 관계를 알아보고 아울러 curve of Spee와 기저골내 기준평면에 대한 전치부의 치축 각도 그리고 전치부 총생등이 어떤 영향을 미치는 지에 대해 고찰해 보고자 한다. 연세대학교 치과대학병원 교정과에 내원하여 교정치료를 받은 환자 중 Angle씨 제 I급 부정교합이며 4개의 제 1소구치를 발거한 양악 전돌자로서 치아에 형태학적 변이 및 보철물을 갖지 않은 자, 치아수에 이상이 없는 자, 교모나 이소맹출치를 갖지 않은 자, 견치 및 대구치가 Angle씨 제 I급 교합관계를 가지며 3m이상의 치아밀집을 갖지 않은 자를 대상으로 하여 치아모형 분석 결과 다음과 같은 결론을 얻었다. 1. 견치간 폭경이 유지될 경우, 제 1소구치 발거 후 하악 중절치가 후방이동 될 수 있는 공간의 양은 소구치 발거 공간의 크기보다 크게 나타났으며, 그 차이는 1mm보다 작았다. 이때 치열궁의 형태가 전방으로 좁아질수록 그 차이가 증가하였다. 2. 견치간 폭경이 구치부의 폭경에 일치되게 확장될 경우 견치간 폭경이 유지될 때보다 3mm내외의 중절치의 후방이 동이 가능한 것으로 나타났다. 3. 중절치의 후방이동시 치체이동과 경사이동에서 가능한 절연의 전후방적인 차이가 미세하게 나타났다. 4. 견치간 폭경을 유지하면서 전치부 분절내 총생을 해소할 경우, 처음의 전치부 분절의 장경이 클수록 중절치의 전방 이동량이 증가하였다. 5. Curve of Spee를 leveling할 경우, arch perimeter의 증가량은 Curve of Spee의 최대 길이의 1/2보다 적게 나타났다.

• 대한치과교정학회지
• /
• 제23권3호
• /
• pp.341-358
• /
• 1993

This study was investigated to evaluate the morphologic characteristics of deepbite tendency as multiple factors. The subjects consisted of 60 control subjects(male 25, female 35) and 137 deephite patients(68 male, 69 female). The deepbite group was composed of 4 subgroups(Class I 44, Class II div. 1 40, Class II div. 2 13, Class III 40). The mean age was 21.57 year for the control group 21 year for deepbite group lateral cephalograph in centric occlusion were taken, traced, and digitized for each subject. The statistically computerized analysis was carried out with SAS program. The results were as follows ; 1. In deepbite group, saddle angle is lesser than that of normal group. 2. The vertical dysplasia is prominent on anterior lower face and is closely related with mandibular form and inclination. 3. Without consideration of sagittal relationship, the dental factors such as curve of Spee, interincisal angle, U1 to upper lip length were prominent in the deepbite group. 4. Although there were individual variances in the perioral soft tissue profile, the lip presented more protruded pattern. 5. There was no significant difference in hyoid bone position and inclination between normal and deepbite group. 6. The multivariate discriminant analysis between normal and Class I deepbite group showed that curve of Spee, AB-MP angle, interincisal angle, articular agnle were critical in the determination of deepbite as multiple factors.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.217-224
• /
• 2016

Purpose: This study aimed to generate 3-D occlusal curvatures and evaluate the relationship between the occlusal curvatures and mandibular occlusal morphology factors. Methods: Mandibular dental casts from 25 young adult Korean were scanned as a virtual dental models with a 3-D scanner(Scanner S600, Zirkonzahn, Italy). The curve of Spee, curve of Wilson, and Monson's sphere were generated by fitting a circle/sphere to the cusp tips using a least-squares method. The mandibular mesiodistal cusp inclination, buccolingual cusp inclination, and tooth wear parameters were measured on the prepared virtual models using RapidForm2004(INUS technology INC, Seoul, Korea). Wilcoxon signed-rank test was performed to test side difference, and Spearman's rank correlation coefficients were investigated to verify the correlation between occlusal curvatures and correlated factors (a=0.05). Results: The mean radii of curve of Spee were $83.09{\pm}33.94$ in the left side and $79.00{\pm}28.12mm$ in the right side. The mean radii of curve of Wilson were $66.82{\pm}15.87mm$ in the mesial side and $47.87{\pm}9.40mm$ in the distal side with significantly difference between mesiodistal sides(p<0.001). The mean radius of Monson's sphere was $121.85{\pm}47.11mm$. Most of the cusp inclination parameters showed negative correlation for the radius of Monson' sphere(p<0.05). Especially, the buccolingual cusp inclinations in mesial side of molar showed high correlation coefficients among the factors(p<0.05). Conclusion: The radius of Monson's sphere was greater than the classical 4-inch values, and the buccolingual cusp inclinations in mesial side of molar can be considered as one of the main factors correlating with the radius of Monson's sphere.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.356-363
• /
• 2016

Objective: The additional arch length required for leveling (AALL) the curve of Spee (COS) can be estimated by subtracting the two-dimensional (2D) arch circumference, which is the projection of the three-dimensional (3D) arch circumference onto the occlusal plane, from the 3D arch circumference, which represents the arch length after leveling the COS. The purpose of this study was to determine whether the cusp tips or proximal maximum convexities are more appropriate reference points for estimating the AALL. Methods: Sixteen model setups of the mandibular arch with COS depths ranging from 0 mm to 4.7 mm were constructed using digital simulation. Arch circumferences in 2D and 3D were measured from the cusp tips and proximal maximum convexities and used to calculate the AALL. The values obtained using the two reference points were compared with the paired t -test. Results: Although the 3D arch circumference should be constant regardless of the COS depth, it decreased by 3.8 mm in cusp tip measurements and by 0.4 mm in proximal maximum convexity measurements as the COS deepened to 4.7 mm. AALL values calculated using the cusp tips as reference points were significantly smaller than those calculated using the proximal maximum convexities (p = 0.002). Conclusions: The AALL is underestimated when the cusp tips are used as measurement reference points; the AALL can be measured more accurately using the proximal maximum convexities.