• 설비공학논문집
• /
• 제27권12호
• /
• pp.609-619
• /
• 2015

A preprocessing scheme utilizing multi-division of the ROI (region of interest) in a chemiluminescence image during inversion is proposed. The resulting inverted image shows the flame's structure, which can be useful for studying combustion instability. The flame structure is often quantitatively visualized with PLIF (planar laser-induced fluorescence) images as well. The chemiluminescence image, which is a line-integral of the flame, needs to be preprocessed before inversion, mainly due to the inherent noise and the assumption of axisymmetry during the inversion. The feasibility of the multi-division preprocessing technique has been tested with experimentally-obtained OH PLIF and $OH^*$ chemiluminescence images of jet and swirl-stabilized flames burning substitute natural gas (SNG). It turns out that the technique outperforms two conventional methods, specifically, the technique without preprocessing and the one with uni-division, reconstructing the SNG flame structures much better than its two counterparts when compared using corresponding OH PLIF images. The characteristics of the optimum degree of polynomials to be applied for curve-fitting of the flame region data for the multi-division method involving two flames has also been investigated.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.240-247
• /
• 2014

안압의 측정은 각막에 air puff 후 각막의 변형 즉, 각막의 두께나 변위 등 생역학적 성질을 관찰함으로써 이루어진다. 본 논문에서는 녹내장이나 라식의 진단을 위하여 사용되는 안압계의 air puff에 의한 각막의 변형을 주파수 영역에서 분석하였다. Air puff 후 각막의 중심부 주변의 변위에 대한 진동 주파수를 측정함으로써 환자와 정상인을 구별한다. 동영상으로부터 이진 영상을 구하고, 상하 변위 데이터와 곡선 정합의 차를 구하여 시간에 따른 각막 상하 진동 프로파일 데이터를 추출하였다. Fourier 변환으로 비정상인의 진동 주파수는 479.2Hz를 얻었고 정상인의 경우 단단함으로 인하여 702.8Hz의 고주파 성분을 볼 수 있었다. 또한 Hilbert-Huang 변환의 EMD 방법을 이용, 고유 모드 함수로 분해하여 국소적, 비선형, 비정상성을 가지는 데이터를 얻고 주파수와 전력을 분석하였다. 마지막으로 특정 고유 모드 함수에 대한 환자와 정상인의 전력비가 6배 이상 차이가 나는 것을 확인하였다.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.833-839
• /
• 2013

Cardiopulmonary resuscitation (CPR) is performed by thoracic compression and artificial ventilation for the patient under emergent situation to maintain at least the minimum level of respiration and blood circulation for life survival. Good quality CPR requires monitoring respiration, however, traditional respiratory air flow transducers cannot be used because the transducer elements are facing the whole area perpendicular to the flow axis. The present study developed a new air flow transducer conveniently applicable to CPR. Specially designed "sensing rod" samples the air velocity at 3 different locations of the flow cross-section, then transforms into average dynamic pressure by the Bernoulli's law. The symmetric structure of the sensing holes of the sensing rod enables bi-directional measurement simply by taking the difference in pressure by a commercial differential pressure transducer. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999 (P<0.0001) and the mean relative error<1%. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2843-2845
• /
• 2000

A lane detection based on a road model or feature all need correct acquirement of information on the lane in a image, It is inefficient to implement a lane detection algorithm through the full range of a image when being applied to a real road in real time because of the calculating time. This paper defines two searching range of detecting lane in a road, First is searching mode that is searching the lane without any prior information of a road, Second is recognition mode, which is able to reduce the size and change the position of a searching range by predicting the position of a lane through the acquired information in a previous frame. It is allow to extract accurately and efficiently the edge candidates points of a lane as not conducting an unnecessary searching. By means of removing the perspective effect of the edge candidate points which are acquired by using the inverse perspective transformation, we transform the edge candidate information in the Image Coordinate System(ICS) into the plane-view image in the World Coordinate System(WCS). We define linear approximation filter and remove the fault edge candidate points by using it This paper aims to approximate more correctly the lane of an actual road by applying the least-mean square method with the fault-removed edge information for curve fitting.

• 한국전산구조공학회논문집
• /
• 제21권2호
• /
• pp.135-143
• /
• 2008

본 연구에서는 진동대 실험을 통해 얻은 동적 데이터를 이용하여 TDL의 동적 비선형 특성에 대한 연구를 수행하였다. 현재까지 TDL의 설계는 액체의 비선형 거동이 나타남에도 불구하고 TMD 근사이론이나 선형파동이론과 같은 선형 거동을 가정으로 설계되어 지는 한계를 가지고 있다. 또한 조화하중과 같은 특정진동수에 지배되는 하중형태에 대한 TDL의 동적 비선형 특성이 규명되었지만 백색잡음과 같은 특정진동수 성분에 지배되지 않은 하중형태에 대한 TDL의 동적 비선형 특성은 아직까지 검증된 바가 없다. 본 논문은 백색잡음을 이용하여 가진 하중 크기에 따른 TDL의 동적 비선형 특성을 검토하여 설계 시 필요한 동조액체감쇠기의 감쇠비, 고유진동수비 및 유효질량비를 평가할 수 있는 산정식을 제안하였다.

• 한국자기학회지
• /
• 제14권6호
• /
• pp.232-235
• /
• 2004

아날로그 형태의 신호를 전송하기에 적합한 특성을 보이는 선형 GMR(giant magnetoresistance) 아이솔레이터를 모델링하여 입력전류에 따른 출력전압과 전류를 조사하였다. GMR 아이솔레이터를 자기적 부분과 전기적 부분으로 나누고 선택된 스핀밸브 소자의 MR(magnetoresistance) 결과를 대입하여 출력전압을 구할 수 있는 순서도를 설정하였다. 자기적 모델링으로는 평판 코일의 3차원 모델을 FEM방법으로 해석하여 입력전류에 의해 생성되는 자장의 세기를 구하였으며, 여기에서 자기코어층이 있는 경우 50% 이상 더 커지는 결과를 얻었다. 그리고 아이솔레이터의 출력전압파형을 계산한 결과 입력 코일 전류에 따른 궤환 코일 전류가 $I_{out}$ = $I_{in}$ -5 mA의 선형함수와 비교시 평균 $\pm$0.25 mA 이내의 차이로 근사한 값으로 계산되었다. 또한 입력되는 코일 전류가 구형파일 때, 출력전압의 반응시간과 파형을 계산하였으며, 이때 최저전압에서 최대 전압까지 상승 및 하강하는 시간은 연산증폭 기의 slew rate가 0.3 V/${\mu}\textrm{s}$ 일 때, 최저전압에서 최대 전압까지 상승 및 하강하는 시간은 6 ${\mu}\textrm{s}$였다.

• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.55-81
• /
• 1989

Recently the instantaneous center concept has been to understand the biomechanics by which a tissue derangement causes a mechanical derangement in human joint. Therefore, to understand the biomechanics of temporomandibular joint (T.M.J.) as a part of human joint, it is necessary to clarify the instantaneous center of rotation (I.C.R.) in the mandibular movement. Twenty male subjects without T.M.J. disorder and mandibular deviation during the mandibular movement were selected for this study. The habitual opening and closing paths were recorded on the paper of the sagittal metal plate by two pencil markers connected to the resin open clutch attached on the lower teeth, which was designed for this study. The coordinates of the 33-target points and the 109-anatomical landmarks were obtained using a Summagraphic digitizer connected to a 18AT computer. The original raw data of the opening and closing paths were smoothed by B-spline curve fitting technique and then the I.C.R. pathways were determined mathematically by the computer using algorithm for finding the I.C.R. of a planer rigid body model. Also the opening and closing movements of the mandible were simulated according to the determined I.C.R. The results obtained from this study were as follows. 1. At the early opening and the last closing, I.C.R's were almost distributed around the mastoid process outside the mandibular body without the presence in the region of the mandibular condyle. 2. The I.C.R. pathway showed variable patterns to each subject at the opening and closing movements. 3. The K constant with uniform pattern was obtained by the rotation angle times the radius, which was assumed to the index of the mandibular movement. 4. The opening and closing movements of the mandible were simulated by the I.C.R. pathways at the habitual opening and closing movements. 5. The mandibular condyle was rotated or translated accordng to the relative rotation angle and radius of the determinant factors of K contant.

• 천문학회보
• /
• 제37권2호
• /
• pp.68.1-68.1
• /
• 2012

We present a comprehensive study of the stellar populations in two faint M31 dwarf satellites, And XI and And XIII. Using deep archival images from the Wide Field Planetary Camera 2 (WFPC2) onboard the Hubble Space Telepscope (HST), we characterize the horizontal branch (HB) morphologies and the RR Lyrae (RRL) populations of these two faint dwarf satellites. Our new template light curve fitting routine (RRFIT) detected RRL populations from both galaxies. The mean periods of $RR_{ab}$ (RR0) stars in And XI and And XIII are < $P_{ab}$ > = $0.621{\pm}0.040$, and < $P_{ab}$ > = $0.648{\pm}0.038$ respectively. Even though the RRL populations show a lack of $RR_{ab}$ stars with high amplitudes (Amp(V) > 1.0 mag) and relatively short periods ($P_{ab}$ ~ 0.5 days), their period - V band amplitude (P-Amp(V)) relations track the lower part of the general P-Amp(V) trend in the M31 outer halo RRL populations. The metallicities of $RR_{ab}$ stars were calculated via the [Fe/H]-log $P_{ab}$-Amp(V) relationship of Alcock et al. The metallicities thus obtained ($[Fe/H]_{And}$ $_{XI}=-1.75%$; $[Fe/H]_{And}$ $_{XIII}=-1.74$) are consistent with the values calculated from the RGB slope indicating that our measurements are not significantly affected by the evolutionary effects of RRL stars. We discuss the origins of And XI and And XIII based on a comparative analysis of the luminosity-metallicity (L-M) relation of Local Group dwarf galaxies.

• 한국해안해양공학회지
• /
• 제19권1호
• /
• pp.38-44
• /
• 2007

Bennet 등(1992)이 제안한 수학적 모델을 사용하여 원형 파일 방파제에 의한 반사율과 투과율을 살펴보았다. 파가 파일 방파제를 통과하면서 갑작스런 단면형상의 변화로 박리현상이 발생하며 이로 인하여 파 에너지의 일부분이 소멸된다. 따라서 수학적 모델의 신뢰성을 높이기 위해서는 에너지 손실계수를 정확히 산정하는 것이 중요하다. 본 연구에서는 FLUENT 상용코드를 사용하여 2차원 난류유동을 해석하고 파일 방파제 전후의 압력차로부터 에너지 손실계수를 구하였다. 에너지 손실계수는 공극률의 함수이며, 둘 사이의 관계식을 제안하였다. 손실계수 산정식의 타당성을 검증하기 위하여 수리모형실험결과와 비교하였다. 4가지 공극률에 대하여 반사율과 투과율을 비교한 결과 해석결과와 모형실험결과는 잘 일치하고 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.290.1-290.1
• /
• 2013

The electrical characterization of Au islands on TiO2 at nanometer scale (as a Schottky nanodiode) has been studied with conductive atomic force microscopy in ultra-high vacuum. The diverse sizes of the Au islands were formed by using self-assembled patterns on n-type TiO2 semiconductor film using the Langmuir-Blodgett process. Local conductance images showing the current flowing through the TiN coated AFM probe to the surface of the Au islands on TiO2 was simultaneously obtained with topography, while a positive sample bias is applied. The boundary of the Au islands revealed a higher current flow than that of the inner Au islands in current AFM images, with the forward bias presumably due to the surface plasmon resonance. The nanoscale Schottky barrier height of the Au/TiO2 Schottky nanodiode was obtained by fitting the I-V curve to the thermionic emission equation. The local resistance of the Au/TiO2 nanodiode appeared to be higher at the larger Au islands than at the smaller islands. The results suggest that conductive atomic force microscopy can be used to reveal the I-V characterization of metal size dependence and the electrical effects of surface plasmon on a metal-semiconductor Schottky diode at nanometer scale.