• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.265-271
• /
• 2015

본 연구에서는 소형 위성카메라의 영상성능 저하를 궤도상에서 능동적으로 보정하기 위해 광학보정장치를 적용한 위성카메라의 광학설계를 수행하였다. 2개의 광학 보정장치는 각각 부반사경 및 초점면부에 부착되며 총 5자유도의 운동이 가능하다. 본 논문에서 설계한 광학부는 슈미트-카세그레인(Schmidt-Cassegrain)타입으로 주반사경의 직경은 200mm이고, GSD 3.8m, MTF 성능은 약 50% 정도이다. 설계된 광학계는 수차곡선과 Spot diagram과 MTF를 통해 성능평가를 수행하였다. 수차곡선을 통해 광학성능에 가장 큰 영향을 미치는 수차가 구면수차인 것을 확인 할 수 있고, MTF 해석을 통해서 나이퀴스트 주파수에서 MTF 30%이상의 요구 성능을 충분히 만족하는 것을 확인하였다.

• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.77-88
• /
• 2000

본 논문은 블록 단위의 비디오 코더 (Video coder)에서 최적 모드들을 적절하게 선택할 수 있는 방법을 설명한다. 비트율의 제어에 관한 문제는 버퍼가 차 있는 양에 따라 양자화 레벨이 변하는 방법이 여러 학자들로부터 연구되어 왔다. 제시된 방법은 각각의 매크로블록(macroblock)에 관한 최적 모드를 검색하지 않고 최적 결정 곡선을 검색한다는 점에서 이전의 것, 즉[4]와는 다르다. 제시된 방법은 비트율의 제어를 위하여 운동보상 또는 비 운동 보상 및 intra/inter 코딩에 관한 결정 방법까지 포함된다. 이러한 결정 방법은 주어진, 즉 고장된 결정 곡선을 이용하는 것 보다 주어진 프레임에서 설정된 비트율(bit-rate)에 따른 총체적인 왜곡을 최소화시키는 유동적인 결정 곡선을 이용하는 것이 더 바람직하다. 가열냉각 최적화기술 (annealing optimization technique)의 모의실험을 통해 곡선을 도출할 수 있다. 알고리즘은 H.261 비디오 코텍(video codec)범위에서 수행되고 모의실험 또한 그 범위에서 결과들을 보여주고 이들을 여타의 접근방법들과 비교한다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권2호
• /
• pp.113-118
• /
• 2010

This paper proposed an ECAM (Electronic cam) control system which has simple and general structure. The proposed cam controller adopted the linear and polynomial curve-fitting method to generates a smooth cam profile curve function. Smooth motion trajectory of master actuator guarantees the good performance of slave motion and has an important effect on the interpolation quality of ECAM. The auto-tuning PID velocity controller was applied to overcome the uncertainties in ECAM, and the gains of the controller are updated continuously to ensure the consistency of system performance under varying working conditions. The robustness of system against the varying load torque disturbances and noises is guaranteed by using the load torque disturbance observer to suppress the disturbance on master actuator. The velocity compensator was applied to compensate the degradation of performance of slave motion caused from the varying driving speed of master motion. The stability and validity of the proposed ECAM control system was verified by simulation results.

• 한국철도학회논문집
• /
• 제13권6호
• /
• pp.589-594
• /
• 2010

철도에서 평면곡선과 종곡선의 경합은 승차감 및 열차의 주행안전성을 저해시키는 원인이 되며, 유지보수비용에도 큰 영향을 미친다. 그러나 철도노선 계획 시 지형조건 및 예기치 않은 환경적 요인에 의해 선형경합이 필요하게 될 경우가 발생된다. 본 연구에서는 종곡선과 평면곡선의 경합이 곡선부에서의 승차감 및 평면곡선의 최적선형조건에 미치는 영향을 파악하고자 하였다. 이를 위해 평면곡선과 종곡선이 경합하였을 경우와 경합하지 않고 평면선형만 있을 경우에 대한 최적캔트량 및 승차감을 비교분석 하였으며, 고속영역에서 선형 경합이 곡선선형조건과 승차감에 미치는 영향을 검토하였다. 그 결과 경합한 경우라도 보정캔트를 부설한다면 승차감 측면에서 평면선형만 부설한 경우와 유사한 조건이 될 수 있음을 알 수 있었다.

• 방송공학회논문지
• /
• 제15권6호
• /
• pp.757-767
• /
• 2010

본 논문은 3차원 TV 시청에 있어서, 2차원에서와 같은 색감을 최대한 제공하기 위한 방법을 연구하였다. 이를 위하여 입력 RGB 색상 막대(color bar) 영상을 기준으로 2차원과 3차원 재생시 재현되는 RGB 강도의 입출력 관계를 모델링하였으며, 이를 근거로 2차원 대비 보정되어야 할 3차원 색상 사상표(mapping table)를 생성하였다. 생성된 사상표를 기존 3차원 TV 시스템의 출력부에 추가하여, 일반 2차원 재생시에는 입력 영상을 우회(bypass)하도록 하고, 3차원 재생시 색상 보정 과정을 수행하도록 하여 3차원 재생시에도 2차원에서 느낄 수 있는 색감을 재현할 수 있도록 하였다.

• Safety and Health at Work
• /
• 제5권2호
• /
• pp.91-96
• /
• 2014

Background: Chronic obstructive pulmonary disease (COPD) is an important cause of occupational mortality in miners exposed to coal mine dust. Although the inflammatory mediators involved in COPD have not been defined, many studies have shown that inflammatory mediators such as reactive oxygen and nitrogen species are involved in orchestrating the complex inflammatory process in COPD. Methods: To investigate the relevance of exhaled biomarkers of oxidative and nitrosative stress in participants with COPD, we determined the levels of hydrogen peroxide, malondialdehyde (MDA), and 3-nitrotyrosine (3-NT) in exhaled breath condensate (EBC) in 90 retired elderly coal miners (53 non-COPD and 37 COPD participants). Results: Mean levels of MDA (4.64 nMvs. 6.46 nM, p = 0.005) and 3-NT (3.51 nMvs. 5.50 nM, p = 0.039) in EBC were significantly higher in participants with COPD. The median level of MDA did show statistical difference among the COPD severities (p = 0.017), and the area under the receiver operating characteristic curve forMDA (0.67) for the diagnostic discrimination of COPD indicated the biomarker. The optimal cutoff values were 5.34 nM (64.9% sensitivity and 64.2% specificity) and 5.58 nM (62.2% sensitivity and 62.3% specificity) forMDA and 3-NT, respectively. The results suggest that high levels ofMDA and 3-NT in EBC are associated with COPD in retired elderly miners. Conclusion: These results showed that the elevated levels of EBC MDA and EBC 3-NT in individuals with COPD are biomarkers of oxidative or nitrosative stress.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1291-1296
• /
• 2005

In this paper, we prevent a display quality drop for image of characteristics brightness ununiformity depend on LED use to LED vision. It is about that method also a control system development equipped with brightness compensation function of LED vision which is done easily for LED set up of LED vision. Generally, It is calculate driving current value is attended by each brightness to brightness characteristics mathematical function establish by "Y=aX+b", When is doing brightness value for "Y", driving current value for "X", brightness compensation value by using time for "b", characteristics value for "a" ground with characteristics curve of LED. So much, First It is create brightness data of each pixel take a photograph red, green and blue of LED vision. Second It is get average error about each pixel which get average brightness value of entire. Last, It is handle a complicated for about gradationally regulation to color and brightness of image send to LED vision. Also It raise the whole average brightness value of vision adjust for "b" value to solve brightness drop problem of LED using the long time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.15-17
• /
• 2006

This paper proposes a compensation method for an air gapped current transformer (CT) in the steady state. An air gapped CT is used in order to reduce a remanent flux in the case of auto-reclosure. It causes larger ratio and angle errors than the closed core CT because the magnetizing inductance of an air-gapped CT is even smaller than the closed-core CT. The core flux is calculated and used to estimate the exciting current in accordance with the hysteresis curve of the air-gapped CT The correct current is obtained by adding the estimated exciting current to the measured secondary current. The performance of the method was investigated for the air gapped CTs with a gap of 0.083mm and 0.249mm for the 120%, 100% and 20% of the rated current. Various test results indicate that the proposed compensation algorithm can improves the accuracy significantly.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.897-905
• /
• 2006

This study considers an experimental design of disturbance compensation control to improve stabilization performance of main battle tanks. An adaptive non-parametric design technique based on the Filtered-x Least Mean Square(FXLMS) algorithm is applied in the consideration of model uncertainties. The optimal compensator is designed by two-step design procedures: determination of frequency response function of the disturbance compensator which can cancel the disturbance of series of single harmonics by using the FXLMS algorithm and determination of the compensator polynomial which can fit the frequency response function obtained in the first step optimally by using a curve fitting technique. The disturbance compensator is applied to a simple experimental gun-torsion bar-motor system which simulates gun driving servo-system. Along with experimental results, the feasibility of the proposed technique is illustrated. Experimental results demonstrate that the proposed control reduces the standard deviation of stabilization error to 47.6% that by feedback control alone. The directional properties of the FXLMS Algorithm such as the direction of convergence and its convergence speed are also verified experimentally.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.415-418
• /
• 2005

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed feature from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.