• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.81-86
• /
• 2008

I present a 3-D profiler specially devised for the profile measurement of specular surfaces that requires precision shape accuracy up to a few nanometer. A profile is reconstructed from the curvature of a test part of the surface at several locations along a line. The local curvature data are acquired with White-light Scanning Interferometry. Test measurement proves that the proposed profiler is well suited for the specular surface inspection like precision mirror.

• 한국광학회지
• /
• 제18권2호
• /
• pp.130-134
• /
• 2007

광역의 자유곡면 형상을 나노미터 정밀도로 측정하기 위한 새로운 형상 측정법으로서 곡률에 근거한 형상 측정법을 제안한다. 곡률 형상 측정기는 피측정물을 일정간격으로 스캔하는 간섭계로써 각 국부영역의 형상으로부터 곡률을 획득하여, 이로부터 전 영역의 형상을 복원한다. 제안된 곡률 형상 측정기는 비구면 형상 측정을 위해 개발된 보상 광학계(Null optics)나 국부영역의 형상을 측정하고 결합하는 subaperture-slicking 법에 비해 측정 장비로부터 발생하는 시스템 오차를 근본적으로 제거하는 특징을 가진다. $80mm\times80mm\times25mm$ 작동구간을 갖는 Stewart Platform과 상용 트와이만 그린 간섭계를 이용하여 곡률간섭계를 구성하였으며, 자유곡면의 형상측정을 위한 첫 단계로서 잘 알려진 구면형상을 측정하고, 기존 장비의 측정값과 비교한 결과 32 mm영역에서 최대 56 nm의 차를 보임을 확인하였다.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.34-40
• /
• 2004

This paper presents studies on curvature radius measurement using the laser interferometer. It is a general practice to measure to $10^{-10}$m in length with the recent improvement and innovations in measurement technology and the processor used. The measurement methods can generally be categorized as these two: the contactual method and non-contactual method; and in this study, we will find ways to lower the cost for a CMM, or a coordinate measurement machine, and try to find an alternative. Furthermore, we will discuss some of the ways to improve the non-contactual measurement methods-optical interferometer method and the optical triangulation method. We will measure an object using a laser distance measuring device and Set the Point-contact result with the ball-bearing type and line-contact result with the bearing type, to decide on which probe type will be used.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.920-924
• /
• 2003

This paper on measurement of curvature radius by the using of laser interferometer and prove. Mean value compared of ball and bearing It is developed program for date creation, and the verification using program. Measurement object center and curvature radius taking of LSC. when it is compared bearing prove with ball prove, the bearing prove can not proper by reason of big uncertainty and If laser setting error decrease, curvature radius get precision radius 10$\^$-5/.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.211-214
• /
• 2000

In this paper, we propose a regular-texture image retrieval approach relating In curvature. Maximum curvature and minimum curvature are computed from the query and each regular-texture image in the database. Seven features are computed from curvature characterizing statistical properties of the corresponding image. Each regular-texture image in the database is then represented as the seven CM (curvature measurement)-features. Query comparison and matching can be done using the corresponding CM-features. Experimental results on Brodatz texture show that the proposed approach is effective.

• 소음진동
• /
• 제1권2호
• /
• pp.107-113
• /
• 1991

When non-contact type vibration probes are used for the precision measurement of shaft vibration, they can induce the measurement errors due to the shaft curvature since they have been calibrated for the flat plate. In this study the errors due to the shaft radius and the misalignment between the shaft and probe centerlines are analyzed, and an in-situ calibration tool, which can be conveniently used for calibration independent of the shaft curvature and material, is introduced.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1445-1450
• /
• 2002

In the present study, a new pattern recognition algorithm was proposed to size spray particles using the boundary curvature information. Conceptually, this algorithm has an advantage over the others because it can identify the particle size and shape simultaneously, and also can separate the overlapped particles more effectively. Curvature of a boundary was obtained from the change of the slopes of two neighboring segments at the corresponding part. The algorithm developed in this study was tested by using an artificially prepared image of a group of spherical particles which were either isolated or overlapped. Particle sizes obtained from the measured curvatures agreed well with the true values. By detecting abrupt changes of the curvature along the image boundary, the element particles could be separated out from their overlapped images successfully.

• 산업기술연구
• /
• 제37권1호
• /
• pp.27-31
• /
• 2017

In this paper, we have extended the research on the infrared sensor which has been limited to the plane. The reflection mechanism of the light on the curved surface is analyzed according to the curvature change and the emitted angle of photodiode and verified through experiments. The difference in the curvature causes a difference in the measurement distance, and also changes the intensity of the light coming into the phototransistor, thereby causing a difference in the output voltage. However, the difference in the output voltage due to the curvature change can be solved by adjusting the emitted angle of the photodiode to minimize the spot area formed on the curved surface regardless of the curvature. Therefore, it is possible to measure the distance by using the infrared sensor regardless of the curvature by aligning the photodiode to the center of the curved surface and adjusting the angle of the photodiode.

• 지구물리와물리탐사
• /
• 제10권3호
• /
• pp.163-172
• /
• 2007

해저면에 반복적으로 나타나는 특정 지형요소를 추출할 수 있는 곡률계산법을 개발하여 태평양 심해 평원지역의 수심자료에 적용하였다. 선형 최소자승오차법을 사용하여 해저면을 임의의 2차원 곡면으로 구성할 수 있으며, 해당 곡면의 곡률은 결정된 2차항 계수간의 관계를 이용하여 고유값(eigen value)을 통해 계산하였다. 곡률의 크기와 부호 변화는 해저구릉, 해저계곡과 같이 해저면 지형의 기하학적 형태에 따라 다르게 나타났다. 곡면 구성에 참여하는 자료의 개수에 따른 반응을 비교하여 최적의 곡면 크기를 설정하였고, 계산된 곡률과 지형요소간의 대응관계를 설정하기 위한 최적의 한계값을 실제 자료와의 비교를 통해 결정하였다. 또한, 배경잡음에 민감하게 반응하는 기존 곡률 계산 방법을 개선하여 고유값의 합을 사용하는 새로운 곡률 계산법을 적용한 결과 추출한 지형요소간의 주향방향 연장성을 향상시킬 수 있었다. 곡률계산에 의한 지형요소 추출법은 망간단괴 채광 가능지역 추출을 위한 효과적인 방법임을 확인할 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.114-118
• /
• 2021

In this research, the dimensional error of the measured specimen according to the measurement method was analyzed for the length, angle, radius of curvature and diameter using a projector which is used in industry. One-way analysis was performed on each data tested 30 times using a statistical technique. Through the experiment, it was found that an error occurred in each data when measuring the length and radius of curvature according to the measurement method, and the null hypothesis that no error occurred when measuring the angle and length was established. Based on this experimental data, the automatic measurement when measuring the projector causes less measurement error, so automatic measurement is recommended when measuring a small product. Also, an optimal measuring method is suggested for securing reliability on formulations of measurement automation.