• 대한한의학회지
• /
• 제38권1호
• /
• pp.81-92
• /
• 2017

Objectives: Herbal dispensaries can be installed separately from medical institutions. This study was done to suggest directions of regulation on management of externally installed herbal dispensaries. Methods: In this study, we visited and investrigated 7 representative herbal dispensaries to understand current status of herbal dispensaries. After comprehending current domestic regulations on herbal dispensaries, we referred "Management Practice on Dispensary Facility of Traditional Chinese Medicine in Medical Institution", "Enforcement Rule of Decree on Institution Standard of Manufacturing and Importation for Drugs, etc." and "Enforcement Rule of Food Sanitation Act" to suggest improved regulations for herbal dispensaries. Results: We suggested reasonable regulations for facility standards including location of building, dispensary room, water supply facility, lavatory and storage facility, etc.. Conclusions: We hope that results of this study could be baseline data for developing regulations on facility standards of herbal dispensaries.

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.91-101
• /
• 2000

As the computer related technology evolves a study for a practical use of real structure as well as its hteory for optimum design has been greatly advanced. But the study on optimum design of pre-stressed concrete beam(PSC-beam) bridge for the construction of national roads and highways in Korea is not sufficient. Since a standard section for the PSC-beam is proposed, it is practically used in designing the PSC-beam. It is noticed that the section using the current standard PSC-beam design to be an over-designed with its surplus safety factor. Therefore, it is necessary to consider economical PSC-beam section which automatically satisfies all requirement of design specifications. Thus, in this study, the optimum design methods of PSC-beam are carried out using the gradient-based search method and global search method. As a result of the optimum design method, it was confirmed that the design of PSC-beam has a serious properties to non-linearity and discontinuity. And the section that in economical and efficinet design methods than the current standard design method is proposed.

• 한국안광학회지
• /
• 제11권4호
• /
• pp.351-355
• /
• 2006

본 연구는 국내 콘택트렌즈의 규격화 현황에 관하여 연구하였다. 최근 콘택트렌즈의 착용률이 증가하고 있음에도 불구하고 한국 산업 규격은 단지 국제 표준화 기구인 ISO(International Organization for Standardization)의 규정을 그대로 번역하여 사용하고 있으며, 아직 국내의 독자적인 규정이 없는 상태이다. 따라서 본 연구는 콘택트렌즈의 ISO(국제표준화 규격)를 조사, 연구하여 국제 규격이 우리의 현 실태와의 어느 정도 부합되는지와 이에 따른 문제점을 파악하여 개선되어야 할 부분에 대해 연구하였다.

• 전자통신동향분석
• /
• 제36권6호
• /
• pp.25-35
• /
• 2021

ATSC 3.0 is a next-generation terrestrial broadcasting standard that provides various functions and improved performance compared to the existing ATSC 1.0 High Definition standard. Based on the ATSC 3.0 broadcast system with IP-centric transport and coherence, it can provide personalized and personalized interactive services to TV viewers. However, the broadcasting system still has a structural limitation in that the service is deployed separately from broadcasters who are allocated a specific frequency and is expected to have different spectrum allocation for each market. To overcome this structural limitation and provide improved services compared with the current ATSC 3.0, preliminary studies were conducted to apply the core network concept of a communication network (particularly 5G) to ATSC 3.0 broadcasting. Finally, in february of this year, the ATSC TG3/S43 group for the development of the ATSC 3.0 Broadcast Core Network (BCN) standard was launched. This paper describes the background and current status of BCN standardization by ATSC TG3/S43, and future standardization prospects.

• Journal of Community Nutrition
• /
• 제5권2호
• /
• pp.65-71
• /
• 2003

In Current Standard Tables of Food Composition in Japan (Fifth Revised Edition), standard composition values of food used regularly in Japan are shown by values per 100g of their edible portion, with one value of standard composition per one foodstuff as a rule. In the Explanation (Chapter 1) and Reference Data (Chapter 4) of the original table, the most important matters are mentioned, including the table of the weight change rate by cooking, the table of the outline of the cookery, and the formula of the actual amount of intake nutrition. These are helpful for an understanding of the actual amount of intake nutrition. The formula for the amount of purchase in consideration of the amount of refuse is also shown. Information concerning foodstuffs and composition items in the table as well as important points in the reference column are concurrently written in English. As related studies, the composition tables by values per 100m1 or considered loss, the table or the formula for estimation of the amount of sucrose, and the list of the composition extant rate after cooking, among others, are also provided. Users should understand the original composition table, and then suggest how to utilize it. (J Community Nutrition 5(2) : 65∼71, 2003)

• 한국안전학회지
• /
• 제33권5호
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.313-316
• /
• 2006

A method for evaluation of the linearity of both the ratio error and phase angle error in the current transformer(CT) comparison measurement equipment has been developed by employing the standard resistors with negligible AC-DC resistance difference less than $10^{-5}$. The non-reactive standard resistors for the linearity check of the system are used as the external burden connected with the secondary of CT under test. These burdens consist of nine standard resistors, with the nominal resistance of $0.01{\Omega},\;0.1{\Omega},\;0.2{\Omega},\;0.4{\Omega},\;0.6{\Omega},\;1{\Omega},\;2{\Omega},\;4{\Omega}$, and $10{\Omega}$. For linearity check, the developed method has been applied in the CT comparison measurement equipment belonging to the industry.

• 한국국방경영분석학회지
• /
• 제26권2호
• /
• pp.101-119
• /
• 2000

US DoD designated the High LEvel Architecture (HLA) as the standard technical architecture for all military simulation since 1996. HLA will supercede the current Distributed Interactive Simulation(DIS) and Aggregated LEvel Simulation Protocol(ALSP) methods by no funds for developing/modifying non-HLA compliant simulations. The new architecture specifies Rules which define relationships among federation components, an Objects Model Template which species the form which simulation elements are described, and an Interface Specification which describes the way simulations interact during operations. HLA is named as standard architecture in NATO, Australia and many other militaries. Also, it will be IEEE standard in the near future. It goes without saying that ROK military whose simulation models are almost from US must be prepared in areas such as ROK-US combined exercise, training, weapon system acquisition, interface models with C4I system, OPLAN analysis, operations, and os on. In this paper, we propose several effective alternatives and issues for ROK Defense Modeling and Simulation under the transition of new HLA architecture. Those include secure the kernel of new simulation technology and develop our own conceptual model, RTI software, prototype federation for each service and aggregated one. In order to challenge the new simulation architecture effectively, we should innovate our current defense modeling and simulation infrastructure such s manpower, organization, budget, research environment, relationships among academia and industry, and many others.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.19-26
• /
• 2002

We have earlier developed a 40-channel SQUID system. An important figure of merit of a MEG system is the localization error, within which the underlying current source can be localized. With this system, we investigated the localization error in terms of the standard deviation of the coordinates of the ECDs and the systematic error due to inadequate modeling. To do this, we made localization of single current dipoles from tangential components of auditory evoked fields. Equivalent current dipoles (ECD) at N1m peak were estimated based on a locally fitted spherical conductor model. In addition, we made skull phantom and simulation measurements to investigate the contribution of various errors to the localization error. It was found that the background noise was the main source of the errors that could explain the observed standard deviation. Further, the amount of systematic error, when modeling the head with a spherical conductor, was much less than the standard deviation due to the background noise. We also demonstrated the performance of the system by measuring the evoked fields to grammatical violation in sentence comprehension.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.363-364
• /
• 2009

본 연구는 IEC/TC 90 규격을 참조하여 Cu stabilizer/Ag/$LaMnO_3$/IBAD-MgO/$Y_2O_3$/$Al_2O_3$/Hastelloy C276/Cu stabilizer의 구조를 가지는 coated conductor의 DC 임계 전류의 결정에 대한 사전 연구를 위해 (1) 시편의 냉각시간, (2) 전류 선의 용량을 변화하여 임계 전류의 변화를 관찰하여 다음과 같은 결과를 얻었다. (1) 5분 이상의 시편 냉각시간은 COV가 약 0.4% 정도로 거의 임계 전류 결정에 영향을 주지 않았으며, 냉각 시간이 길면 길수록 임께 전류 이하에서 전압의 기저면이 낮아지는 경향을 보였다. (2) 전류 선의 용량이 클수록 임계 전류 이하에 전압의 기저면이 낮아지는 경향을 보였다.