• 센서학회지
• /
• 제27권6호
• /
• pp.357-361
• /
• 2018

This paper presents an averaging current adjustment technique for reducing the pixel resistance variation in a bolometer-type uncooled infrared image sensor. Each unit pixel was composed of an active pixel, a reference pixel for the averaging current adjustment technique, and a calibration circuit. The reference pixel was integrated with a polysilicon resistor using a standard complementary metal-oxide-semiconductor (CMOS) process, and the active pixel was applied from outside of the chip. The averaging current adjustment technique was designed by using the reference pixel. The entire circuit was implemented on a chip that was composed of a reference pixel array for the averaging current adjustment technique, a calibration circuit, and readout circuits. The proposed reference pixel array for the averaging current adjustment technique, calibration circuit, and readout circuit were designed and fabricated by a $0.35-{\mu}m$ standard CMOS process.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2008년도 춘계학술발표대회 개요집
• /
• pp.15-15
• /
• 2008

• 대한음성학회지:말소리
• /
• 제50호
• /
• pp.23-39
• /
• 2004

Current 'Pronunciation Methods of Standard Korean(PMSK)' has several problems. Some of those are from conflicts with linguistic reality, and the rest are from their internal inconsistencies. So, we feel that it should be revised as soon as possible. But it seems that the revision is not the best way, because linguistic change will make us revise it continually. The only way to establish its reasonable alternative is that we should update our descriptive dictionary whenever we need to.

• 한국비블리아학회지
• /
• 제32권4호
• /
• pp.67-88
• /
• 2021

국가과학기술표준분류는 과학기술 관련 정보, 인력, 연구개발사업 등을 효율적으로 관리하기 위한 목적으로 제정 및 운영되고 있으며 개정주기는 5년이다. 2022년은 차기 개정 절차의 첫 해로 현재의 대, 중, 소분류체계 중 소분류체계를 기술키워드화 하는 것이 주 목적이다. 이는 현재의 경직된 구조로 인해 발생하는 유관 분류체계와의 연계 어려움과 최신 용어에 대한 미반영 문제를 해결하기 위한 것이다. 본 연구에서는 이 문제 해결을 위해 기존의 분류체계 관리를 용어관리체계로 변화시켜 용어의 품질과 활용성을 높일 수 있는 방법을 제안하였다. 이를 위해 표준용어관리체계인 SKOS와 ISO/IEC 11179 표준을 기본 모델로 설정하였다. 또 해외 과학기술용어집에서 활용하고 있는 용어관리 메타데이터 표준을 조사하여 현 국가과학기술표준분류체계와 비교한 후 용어관리관점에서 즉시 활용할 수 있는 메타데이터들을 도출하였다. 그 결과 현 관리체계에서 즉시 변형하여 적용할 수 있는 11개 표준 요소를 발굴 제안하였으며, 차후 분류체계 개정 작업을 거친 후 적용할 수 있는 5개 요소를 발굴하여 제안하였다.

• 전기학회논문지P
• /
• 제55권3호
• /
• pp.141-145
• /
• 2006

The line current problem(2-dimensional space : point source) is not easy to analyze the magnetic field using the standard finite element method(FEM), such as overhead trolley line or transmission line. To supplement such a defect this paper is proposed the coupling scheme of analytical solution and FEM. In analysis of the magnetic field using the standard FEM. If the current region is a relatively small compared to the whole region. Therefore the current region must be finely divided using a large number of elements. And the large number of elements increase the number of unknown variables and the use of computer memories. In this paper, an analytical solution is suggested to supplement this weak points. When source is line current and the part of interest is far from line current, the analytical solution can be coupling with FEM at the boundary. Analytical solution can be described by the multiplication of two functions. One is power function of radius, the other is a trigonometric function of angle in the cylindrical coordinate system. There are integral constants of two types which can be established by fourier series expansion. Also fourier series is represented as the factor to apply the continuity of the magnetic vector potential and magnetic field intensity with tangential component at the boundary. To verify the proposed algorithm, we chose simplified model existing magnetic material in FE region. The results are compared with standard FE solution. And it is good agreed by increasing harmonic order.

• 센서학회지
• /
• 제25권5호
• /
• pp.349-353
• /
• 2016

Recently, research on bolometer-type uncooled infrared image sensor which is made for industrial applications has been increasing. In general, it is difficult to calibrate fixed pattern noise (FPN) of bolometer array. In this paper, average-current calibration algorithm is presented for reducing bolometer resistance offset. A resistor which is produced by standard CMOS process, on the average, has a deviation. We compensate for deviation of each resistor using average-current calibration algorithm. The proposed algorithm has been implemented by a chip which is consisted of a bolometer pixel array, average current generators, current-to-voltage converters (IVCs), a digital-to-analog converter (DAC), and analog-to-digital converters (ADCs). These bolometer-resistor array and readout circuit were designed and manufactured by $0.35{\mu}m$ standard CMOS process.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.153-159
• /
• 2008

We have developed an absolute evaluation method to obtain the ratio error and phase displacement of a current transformer (CT) without any precise standard CT by measuring four parameters in a CT equivalent circuit. The excitation admittance in the CT equivalent circuit can be obtained by employing standard resistors with negligible reactive component. The secondary leakage impedance in the CT equivalent circuit can be measured using a universal impedance bridge. The method was applied to CTs under test with the wide current ratios in the range of 5 A / 5 A - 5,000 A / 5 A and 5 A / 1 A - 5,000 A / 1 A. The ratio error and phase displacement of the CT under test obtained in this study are consistent with those measured at the national institute in Canada using the same CT under test within an expanded uncertainty (k = 2) in the overall current ratios.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.214-218
• /
• 2008

Because on the high-tension underground distribution line of an electric railway high voltage XLPE Cable two or three circuits between railway stations with a standard as receiving transformer facilities are established at a $30km{\sim}50km$ interval, reactive power in which the phase of a current is larger than that of a voltage is supplied when trains are not working, so when there are no loading or low loading as night. Due to the long-distance trend of the underground distribution system on an alternating current railway distribution line, the terminal voltage of a transformer is over the standard voltage, and after all, commercial cycle overvoltage is continued. To solve this problem, the shunt reactor is installed in middle of power distribution lines to maintain receiver voltage meted under the allowance regulation through control of the reactive power. Also, in case that the thickness of single cable is over $60mm^2$ and length of line is about over 30km, a circuit breaker is broken by shorting shunt ability of charging current in excess of shunt current(31.5A.rms). Therefore, this thesis presents installing the location of shunt reactor for quantitative analysis by using optimum algorism for compensation and control of the charging current.

• 한국CDE학회논문집
• /
• 제21권4호
• /
• pp.363-377
• /
• 2016

The introduction of the BIM into the architectural service industry is currently not being conducted smoothly. The purpose of this research is to, considering the current state of the market, establish long-term strategies that will enable the BIM to successfully settle. The survey has been conducted in target of architects in order to understand pending issues. Additionally, the articles regarding BIM have been researched for the purpose of better understanding the current societal demands. Indicated by survey results, the architects agree to a certain extent upon the need of BIM for architectural designs, yet also express concerns that the BIM introduction does not guarantee betterment in efficiency. The problematic aspects of BIM introduction that have already been discussed in some policy-related studies include a multitude of complicated issues that are unable to be resolved within a short period of time: underdeveloped BIM infra, the limit of BIM software itself, political issues regarding licensing and lack of social awareness. Based on the issues mentioned above, three main areas of focus along with their respective practical strategies and tasks have been designated. Finally, this research has analyzed the current situation and its issues along with the political solutions of 12 projects, amongst which include the standard for plan drawings, licensing system improvement, cost standard and BIM introduction support. Finally this research has analyzed the current situations and its' issues along with the political solutions of 12 projects, amongst them are the standard for plan drawings, licensing system improvement, cost standard and BIM introduction support.

• 한국지진공학회논문집
• /
• 제24권5호
• /
• pp.197-209
• /
• 2020

Evidence of liquefaction during the 2017 Pohang earthquake has highlighted the urgent need to evaluate the current seismic design standard for liquefaction in Korea, particularly the liquefaction triggering standard. With the simplified method, which is the most popular method for evaluating liquefaction triggering, the factor of safety for liquefaction triggering is calculated via the cyclic stress ratio (CSR) and the cyclic resistance ratio (CRR). The parameters in the CSR and CRR have undergone changes over time based on new research findings and lessons learned from liquefaction case-histories. Hence, the current design standard for liquefaction triggering evaluation in Korea should also reflect these changes to achieve seismic safety during future earthquakes. In this study, liquefaction susceptibility criteria were discussed initially and this was followed by a review of the current liquefaction triggering codes/guidelines in other countries and Korea. Next, the parameters associated with the CSR such as the maximum ground acceleration, stress reduction factor, magnitude scaling factor, and overburden correction factor were discussed in detail. Then, the evaluation of the CRR using the SPT N-value and CPT qc-value was elaborated along with overburden and clean-sand correction factors. Based on this review of liquefaction triggering evaluation standards, recommendations are made for improving the current seismic design standard related to liquefaction triggering in Korea.