Background: With the recent epidemiologic transition in Thailand, featuring decreasing incidences of infectious diseases along with increasing rates of chronic conditions, cancer is becoming a serious problem for the country. Breast cancer has the highest incidence rates among females, not only in the southern regions, but throughout Thailand. Surat Thani is a province in the upper part of Southern Thailand. A study was needed to identify the current burden, and the future trends of breast cancer. Materials and Methods: Here we used cancer incidence data from the Surat Thani Cancer Registry to characterize the incidences of breast cancer. Joinpoint analysis was used to investigate the incidences in the province from 2004 to 2012 and to project future trends from 2013 to 2030. Results: Age-standardized incidence rates (world) of breast cancer in the upper parts of Southern Thailand increased from 35.1 to 59.2 cases per 100,000 female population, which is equivalent to an annual percentage change of 4.5-4.8%. Linear drift effects played a role in shaping the increase of incidence. Joinpoint projection suggested that incidence rates would continue to increase in the future with incidence for women aged 50 and above, at a higher rate than for women below the age of 50. Conclusions: The current early detection measures increase detection rates of early disease. Preparation of a budget for treatment facilities and human resources, both in surgical and medical oncology, is essential.
Journal of the Korean Institute of Telematics and Electronics
/
v.8
no.2
/
pp.24-33
/
1971
A noble method of delta modulation by means of pair transistor circuit having negative resistance charcteristic is presented. An RC parallel circuit is inserted between two eiuitter tarminals of the pair transistor circuit, and their emitters are driven by a square pulsed current source. Basically this is a relaxation oscillator circuit. But when the value of capacitors and resistanc R, and the pulse height of driving source are properly chosen, the RC parallel circuit apparently functions as integrating circuit of driviving pulses. Compared with the integrated voltage of capacitor C, a signal input voltatage supplied in series with RC parallel circuit between two emitters makes on or off either of the pair transistors. as the result, one bit pulse is sent out from the coupling resistance terminal of conducted transistor. The circuit diagram used for this experiment is presented, it i% composed with simple mod ulster circuit, differential amplifier and pulse shaping amplifier, The characteristics of the components of this ciruit are discussed, and especially quantumized noise in this delta modulation system is discussed in order to improve the signal to noise ratio which has a close relation with circut constants, quantumized voltage, pulse height and width of driving current source.
Saha Bishwajit;Koh Kang-Hoon;Kwon Soon-Kurl;Lee Hyun-Woo;Nakaoka Mutsuo
Proceedings of the KIPE Conference
/
2006.06a
/
pp.203-205
/
2006
This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.
This paper aims to derive the strategies for the container terminal in Pusan. So it has focused on analyzing the current conditions of Pusan container terminal while evaluating the difficulties arising from the existing facilities/equipment and the operating system in the Pusan Korea Container Terminal through the workers at the container terminal and at off-dock CY. The object of this study is to assist the existing terminals to operate the facilities/equipment reasonably and to contribute shaping the ports policy which will be the basis of constructing new ports that will remain competitive while maintaining superiority over the ports in northeast area. According to the analysis 68% of the supplier answered that their terminal services which are the most important factor in running a terminal were superior to the other while only 28% of the user answered that they thought the current services were superior. For the areas of supplementing the terminal the people working at the terminal answered in the order of business operation equipment the number of berth service and management ability while the user answered in the order of service computer system transportation system and equipment. According to the regression analysis it became clear that there should be more effort toward improving or supplementing the facility scale facility usage charge transportation facilities which will assist in developing competitiveness of the terminal. It was also noted that management ability and business ability were mentioned as the important factors in operating a terminal.
Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
/
2006.05a
/
pp.387-390
/
2006
This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit Incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.
This paper presents design and operational characteristics of 150 MW pulse power system for high current pulse forming network to control trigger time. The system is composed of two capacitor bank modules. Each capacitor bank module consist of a trigger vacuum switch, 9k 33kJ capacitor, an energy dump circuit, a crowbar circuit and a pulse shaping inductor and is connected in parallel. It is controlled by trigger controller to select operational module and determine triggering time. Pspice simulation was conducted about determining parameters of components such as crowbar circuit, capacitor, pulse forming inductor, trigger vacuum switch and predicting results of experiment circuit. The result of the experiment was in good agreement with the result of the simulation. The various current shapes with 300~650 us pulse width is formed by sequential firing time control of capacitor bank module. The maximum current is about 40 kA during simultaneous triggering of two capacitor bank modules. The developed 150 MW pulse power system can be applied to high current pulse power system such as rock fragmentation power sources, Rail gun, Coil gun, nano-powers, high power microwave.
Ji, Young-Yong;Hong, Dae-Seok;Kang, Il-Sik;Shon, Jong-Sik
Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
/
v.5
no.3
/
pp.257-265
/
2007
Spent filter wastes of about 1,000 units (200 L) have been stored in the waste storage facility of the Korea Atomic Energy Research Institute since its operation. At the moment, to secure space in a waste storage facility as well as to efficiently manage spent filter wastes, it is necessary to conduct a compaction treatment of these spent filters, and finally, to repack the compacted spent filters into a 200 liter drum. To do that, the spent filter wastes were first classified according to their generation facilities, their generation date and their surface dose rate by investigating the inventory of the spent filters. In order to repack a compacted spent filter in a 200 liter drum, it is first necessary to conduct a radionuclide assessment of a spent filter before compacting it. Therefore, after taking a representative sample from a spent filter without a dismantlement, the nuclide analysis for it will be conducted. And then, after putting a spent filter into a regular drum by conducting the columnar shaping of the hexahedral form of a spent filter, the compaction treatment of the shaped spent filter will be conducted by vertically compacting it.
This study examines the relationship of the industry-specific factors that effect innovation of manufacturing technology and the market share within the defense industry. Since the establishment of the basic defense industry framework in 1973, there were numerous interactions of the industry-specific factors of the defense industry structure with the technological innovation and market organization of the defense industry. During last three decades, the domestic defense industry has achieved the considerable level but the framework of the basic system has not developed much in areas of the military science and the defense manufacturing technology. Industry-specific factors were formed in the process and appeared in a variety of behavioral characteristics as subsystems. Currently, there IS a growing trend where the management of defense industry is gradually deteriorating due to limitation of the domestic industry-specific factor (e.g. defense technologies, amount of demand, etc.). If there is a prominent imbalance of the industry-specific factors. it can trigger the potential problem of conflict, lack of cooperation and control, slowing the growth of the manufacturing technology thereby diminishing the market and deteriorating the defense supply/demand relationship. In a research conducted by Joe S. Bain, Bain analyzed the relationship of the traditional industrial organization where industry-specific factor(S) not only impacts the conductor(C). And, conductor(C) influences the shaping of the performance(P) of relationship of the traditional industrial organization. Consequently, the researcher has identified the demand monopoly, barriers to entry, and market competition with comparison of defense industry issues. These defense issues were three industry-specific factors identified, which are 1) The demand monopoly and The entry barriers to new market competition, 2) the industrial technical factor to a production technical competitiveness and a market sharing competitiveness, 3) the probability factor to revolution for military affairs(RMA) and a R&D production. According to baseline with these factors, the following research model is established from the special companies group(Group A), the systematization companies group(Group B), and the general companies group(Group 0. The hypothesis is that if there are more industry-specific factors, then there will be more relationships of defense industry relation statutes. This research is an empirical study on the relationship that the industry specific factors effects the innovation of manufacturing technology and the shaping of the market in the defense industry. Moreover, the existing models to evaluate the industry specific factors of the defense industry IS much to be desired with the controlled statistical analysis of the result. It is vital to study on current situation with suggesting alternative strategy to the efficient strategy. The descriptive analysis approach analysis is conducted with SPSSWIN to conduct reliability test, factor analysis, correlation analysis, cross-tabulation analysis, one-way ANOVA, and multiple regression analysis. However, there were some limitations of the survey such as the rigidity of concept about the technical factors and various market management factors. The wishes is that the decision-maker could be utilized these defence industrial factors to formulate efficient defence policy and strategy in the future.
Purpose: In the case of cavity discovered by ground penetrating radar exploration, it is necessary to accurately predict the filling amount in the cavity in advance, fill the cavity sufficiently and exert strength to ensure stability and prevent ground subsidence. Method: The cavity waveform analysis method by GPR exploration and the method using the cavity shape imaging equipment were performed to measure the cavity shape with irregular size and shape of the actual cavity, and the amount of cavity filling of the injection material was calculated during rapid restoration. Result: The expected filling amount was presented by analyzing the correlation between the cavity size and the filling amount of injection material according to the cavity scale and soil depth through the method by GPR exploration and the cavity scale calculation using the cavity shaping equipment. Conclusion: The cavity scale measured by the cavity imaging equipment was found to be in the range of 20% to 40% of the cavity scale by GPR exploration. In addition, the filling amount of injection material compared to the cavity scale predicted by GPR exploration was in the range of about 60% to 140%, and the filling amount of the injection material compared to the cavity size by the cavity shaping equipment was confirmed to be about 260% to 320 Purpose: The purpose of this study is to examine the types of crimes taking place in the metaverse, and to establish a crime prevention strategy and find a legal deterrent against it. Method: In order to classify crime types in the metaverse, crime types were analyzed based on the results of previous studies and current incidents. Result: Most of the crimes taking place in the metaverse are done in games such as Roblox or Zeppetto. Most of the game users were teenagers. Looking at the types, there are many teens for sexual crimes, violent crimes, and defamation, but professional criminals are often included in copyright infringement, money laundering using virtual currency, and fraud. Conclusion: Since the types of crimes in the metaverse are diverse, various institutional supplementary mechanisms such as establishment of police crime prevention strategies, legal regulations, and law revisions will have to be prepared.
Objective: This study aims to survey and compare three systemic accident investigation techniques of Accimap, STAMP and FRAM, based on the application studies of the Sewol ferry accident. Background: Traditional accident investigation methods such as domino models, FTA, etc. work well for losses caused by physical component failures or actions of human in relatively simple systems, but are unable to depict mechanisms generating errors and violations in the current complex socio-technical systems. For better understanding the structure and behavior of the socio-technical systems, systemic techniques have been developed and used. Method: This study was mainly based on survey of literatures through surfing webpages of ScienceDirect and Google, and ergonomics relevant journals. The key words of Sewol, Sewol ferry, Sewol ferry accident, etc. were used in the survey. Results: Three systemic accident investigation methods included similar actors in the Sewol ferry accident including government, Ministry of Ocean and Fisheries, Korean Coast Guard, Korean Register of Shipping, Korea Shipping Association, Chonghaejin Marine Company, crew members. The methods graphically represented each level's failures or performance variabilities of relevant functions and relationships between them. It was shown that the systemic methods consider the entire system, ranging from the environment in which the accident occurred, to the role of government in shaping the system of work. Each method has its own comparative pros and cons, but the Accimap has advantages in terms of time of analysis, data required, model complexity and degree of comprehensiveness. Conclusion: This study reviewed and compared three systemic accident investigation methods, which showed that there are systemic characteristics and pros and cons in the methods. Application: The results would be used as a guideline when selecting accident investigation methods.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.