• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.545-556
• /
• 1990

A design method of a current source using 12-pulse phase-controlled rectifier (PCR) is presented. The critical inductance of the 12-pulse PCR is derived and it is shown that the critical inductance can be reduced using a current source. The control circuit of the 12-pulse PCR with an inner fast dynamic loop is proposed to give the frequency synchronism and to reduce the subharmonics due to the unbalance of the transformer of the power line. This circuit is analyzed and its dynamic loop is optimized. The optimal constant PIMF (proportional, integral and measurable variable feedback, and feedforware) controller is also designed using the time-weighted quadratic performance index. It is shown via experimental results that the proposed design method gives high dynamic and static performance of the current source using the 12-pulse PCR.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.942-945
• /
• 2001

Pulse electrochemical micromachining offers significant improvements in dimensional accuracy as compared with conventional electrochemical machining. One primary issue in pulse electrochemical micromachining is to identify and control machining depth as well as interelectrode gap size. This paper presents an identification method for the machining depth by in-process analysis of machining current and interelectrode gap size. The inter electrode gap characteristics, including pulse current, effective volumetric electrochemical equivalent and electrolyte conductivity variations, are analysed based on the model and experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.405-408
• /
• 1998

In this paper, a predictive current control of 12-pulse parallel connected dual converter system with interphase transfromer(IPT) is presented. Firstly, 12-pulse parallel connected dual converter system and the predictive current control of this system is discussed. And the validity of the presented system and the excellence of the predictive current control response is proved through the simyulation and experiment result.

• 한국자기학회지
• /
• 제21권2호
• /
• pp.48-51
• /
• 2011

본 논문에서는 짧은 전류 펄스를 이용한 미소자기 소자에서의 전류 유도 자화 반전에 대한 매크로 스핀 시뮬레이션 연구를 수행하였다. 자화 반전 전류 분포에 있어서 에너지 장벽이 미치는 효과에 특별히 주목하였다. 자화 반전 전류의 크기 및 분포는 전류 펄스 폭의 감소에 따라 증가했다. 여기서 긴 전류 펄스 폭 영역에서는 에너지 장벽과 자화 반전 전류 분포 사이의 관계가 아레니우스-닐 법칙에 의해 서술된다. 하지만 짧은 전류 펄스 폭의 영역에서는 이 관계가 풀리지 않은 채로 남아있다. 이는 짧은 전류 펄스로 인한 자화 반전이 열적 활성화에 의해서가 아닌 세차 운동에 의해 좌우되기 때문이며, 이를 해결하는 데에 있어서 어려움이 발생한다. 그러므로 포커-플랑크 방정식을 풀어서 짧은 전류 펄스 영역에서의 자화 반전에 대한 정확한 공식을 얻어내는 것이 필요하며 이를 통해 짧은 전류 펄스 영역에서의 자화 반전 양상을 이해 할 수 있을 것으로 본다.

• 한국표면공학회지
• /
• 제14권4호
• /
• pp.215-220
• /
• 1981

The surface appearance of chromium electrodeposit was studied by employing a pulse curr-ent plating in self-regulating high speed (SRHS) bath containing 20 g/$\ell$, K2SiF6 7.5 g/$\ell$ SrSO4 and 250 g/$\ell$ CrO3. As the pulse frequency increased, the surface appearance changed suddenly from bright a-ppearance in a direct current plating condition to gray one in the range of pulse frequency less than about 20KHz. However the bright appearance is recovered as the pulse frequen-cy exceeded 20 KHz. This phenomena seemed to be related with the preferred orientation of electrodeposits, considering the relationship between the preferred orientation of elect-rodeposits and surface appearance in a SRHS bath. Direct current plating was also applied to both Sargent and SRHS bath and investigat-ion on surface appearance was extended to the high current density of 400 A/dm2. In a Sa-rgent bath, the increase in bath temperature was necessary for bright appearance as the current density was increased within 150 A/dm2, but bright region was shown in the cons-tant temperature of 70-75$^{\circ}C$ above the current density of 150A/dm2. On the other hand, two regions of surface brightness was found in a SRHS bath. One is region in the low temperature less than 25$^{\circ}C$ and the other in the moderate temperature range from 55$^{\circ}C$ to 65$^{\circ}C$.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.568-574
• /
• 2000

본 논문에서는 6-펄스 싸이리스터 컨버터에 간단한 보조회로를 추가하여 펄스 수를 증대시키는 방식을 제안한다. 제안한 방식으로 6-펄스 컨버터는 12-펄스, 18-펄스 및 24-펄스 동작을 하여 입력전류 뿐만 아니라 출략전압에서도 파형의 개선효과룹 가셔온다. 또한 입력전류 및 출력전압의 해석을 통하여 시스템의 전 위상각에 대한 보 조싸이라스터의 최적제어각을 계산하고 실험을 통하여 본 방식의 타딩성을 입증한다.

• 대한전자공학회논문지
• /
• 제8권4호
• /
• pp.7-16
• /
• 1971

쌍트란지스터 회로에 의하면 전류제어형의 부성저항소자가 가능하다. 이와같은 부성소자를 사용한 구형파발진회로의 바이어스전류에 신호파를 중첩함으로써 펄스폭변조회로를 구성하였다. 신호파가 정인 경우에는 한쪽의 트란지스터의 바이어스전류만을 증가시키고, 또 신호파가 부인 경우에는 다른 한쪽의 바이러스만을 증가시키는 방법을 채택하였다. 따라서 신호회로로서 일종의 전파정류회로의 변형을 채용하였다. 발진주기의 이론적해석과 회로정수결정의 설계지침을 구명하고 실험회로를 제시하였다.

• 전기학회논문지P
• /
• 제61권3호
• /
• pp.134-139
• /
• 2012

The power characteristics of the Mg-Air fuel cell were investigated with regard to variation of load conditions. The types of load current using for the Mg-Air fuel cell with 10% NaCl electrolyte were step type, ramp type and pulse type. It was found that transient phenomena occurred in the step current load, which is due to activate of the oxidation-reduction reaction process. And the transient time increase with the load current increase. In the load current of ramp type, the slop of voltage drop increased with current load slop ${\alpha}$ increase. The load voltage and power decreased according to the pulse period of load current decrease were attributed to the metal sludges.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.1014-1020
• /
• 2010

In order to improve the purity on deposit in cobalt electrowining, a fundamental study using Pulse-Reverse Current (PRC) was carried out. Based on a sulfate solution, Cu, Ni, and Fe as impurities were added during cobalt electrowinning. There were four reverse waveforms and frequency conditions from 1 Hz to 10 kHz, and the purity of each condition was compared with the Direct Current (DC) purity. From the results, it was found that the anodic potential induced by reverse current affects selective dissolution of impurities. In this work, the case of the highest reverse peak current density ($I_r$) with a short reverse time ($t_r$) at 100 Hz showed a higher purity than that of the DC. This PRC condition also showed only a 4% low current efficiency comparable to the DC. We concluded that an optimized PRC for cobalt electrowinning could improve the purity with little loss of current efficiency.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.51-57
• /
• 2011

A power supply for magnetic-stimulation devices was designed via a control algorithm that involved a start current application based on a resonant converter. In this study, a new power supply for magnetic-stimulation devices was designed by controlling the pulse repetition frequency and pulse width. The power density could be controlled using the start-current-compensation and ZCS (zero-current switching) resonant converter. The results revealed a high-repetition-frequency, high-power magnetic-stimulation device. It was found that the stimulation coil current pulse width and that pulse repetition frequency could be controlled within the range of 200-450 ${\mu}S$ and 200-900 pps, respectively. The magnetic-stimulation device in this study consisted of a stimulation coil device and a power supply system. The maximum power of the stimulation coil from one discharge was 130 W, which was increased to 260 W using an additional reciprocating discharge. The output voltage was kept stable in a sinusoidal waveform regardless of the load fluctuations by forming voltage and current control using a deadbeat controller without increasing the current rating at the starting time. This paper describes this magnetic-stimulation device to which the start current was applied.