위성의 전력 시스템은 전력의 생산, 변환 및 분배를 담당하는 주요한 시스템으로, 임무 수명뿐 아니라 임무 횟수, 시기 등의 설계에 사용된다. 이중 전력의 변환을 담당하는 변압기의 부하와 입력 조건에 따라 안정화 설계가 이루어 져야 하지만, 실지 궤도상에서 Test 및 check-out을 진행할 수 없는 특성으로 다양한 입출 조건 변화에 대한 성능 및 안전성을 확인하기위한 방법이 요구된다. 일반적으로 위성 컨버터는 다양한 부하 조건에 따라 설계되므로, 부피 및 설계의 효율성을 위해 다중 출력 및 여러 개의 stage를 거쳐서 전력 변환이 이루어지게 된다. 하지만, 이로 인해 분석에 많은 어려움을 지니게 되어 직관적인 회로의 파악은 쉽지 않게 된다. 또한 일반적인 분석으로는 모든 상태 방적식의 해를 구하기 쉽지 않아서 실제 운용 시에 가해질 수 있는 소자에 대한 영향성에 대한 분석이 힘들 수 있게 된다. EDF model은 fundamental 주파수 분석을 통해 모든 소자에 대한 분석이 가능한 방법이며 multi-stage의 경우에도 입력 모델링으로 한꺼번에 1st stage와 2nd stage의 분석이 가능한 방법이다. 본 논문에서는 EDF 방법을 통한 modeling과 시뮬레이션 modeling을 비교하여 적용의 타당성을 분석하고, 이를 통해 제어기를 설계하여 multi-stage 컨버터의 직관적인 회로 분석이 가능함을 확인 하였다.
Deng, Yinjuan;Wang, Shangping;Zhang, Qian;Zhang, Duo
KSII Transactions on Internet and Information Systems (TIIS)
/
제16권2호
/
pp.445-466
/
2022
As everything linking to the internet, people can subscribe to various services from a service provider to facilitate their lives through the Internet of Things (IoT). An obligatory thing for the service provider is that they should push the service data safely and timely to multiple IoT terminal devices regularly after the IoT devices accomplishing the service subscription. In order to control the service message received by the legal devices as while as keep the confidentiality of the data, the public key encryption algorithm is utilized. While the existing public encryption algorithms for push service are too complicated for IoT devices, and almost of the current subscription schemes based on push mode are relying on centralized organization which may suffer from centralized entity corruption or single point of failure. To address these issues, we design a secure subscription-push service scheme based on blockchain and edge computing in this article, which is decentralized with secure architecture for the subscription and push of service. Furthermore, inspired by broadcast encryption and multicast encryption, a new encryption algorithm is designed to manage the permissions of IoT devices together with smart contract, and to protect the confidentiality of push messages, which is suitable for IoT devices. The edge computing nodes, in the new system architecture, maintain the blockchain to ensure the impartiality and traceability of service subscriptions and push messages, meanwhile undertake some calculations for IoT devices with limited computing power. The legalities of subscription services are guaranteed by verifying subscription tags on the smart contract. Lastly, the analysis indicates that the scheme is reliable, and the proposed encryption algorithm is safe and efficient.
Yousry B.I. Shaheen;Ghada M. Hekal;Ayman M. Elshaboury;Ashraf M. Mahmoud
Structural Engineering and Mechanics
/
제90권4호
/
pp.371-390
/
2024
Investigating the impact of openings on the structural behavior of ferrocement I-beams with two distinct types of reinforcing metallic and non-metallic meshes is the primary goal of the current study. Up until failure, eight 250x200x2200 mm reinforced concrete I-beams were tested under flexural loadings. Depending on the kind of meshes used for reinforcement, the beams are split into two series. A control I-beam with no openings and three beams with one, two, and three openings, respectively, are found in each series. The two series are reinforced with three layers of welded steel meshes and two layers of tensar meshes, respectively, in order to maintain a constant reinforcement ratio. Structural parameters of investigated beams, including first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were reported. The number of mesh layers, the volume fraction of reinforcement, and the kind of reinforcing materials are the primary factors that vary. This article presents the outcomes of a study that examined the experimental and numerical performance of ferrocement reinforced concrete I-beams with and without openings reinforced with welded steel mesh and tensar mesh separately. Utilizing ANSYS-16.0 software, nonlinear finite element analysis (NLFEA) was applied to illustrate how composite RC I-beams with openings behaved. In addition, a parametric study is conducted to explore the variables that can most significantly impact the mechanical behavior of the proposed model, such as the number of openings. The FE simulations produced an acceptable degree of experimental value estimation, as demonstrated by the obtained experimental and numerical results. It is also noteworthy to demonstrate that the strength gained by specimens without openings reinforced with tensar meshes was, on average, 22% less than that of specimens reinforced with welded steel meshes. For specimens with openings, this value is become on average 10%.
Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.
수직 돌풍이 작용하는 비행선의 비선형 방정식을 이용하여 종방향 운동에 대한 동적 반응을 살피고 제어기를 설계하였다. 비행선의 부가 질량과 부가 관성 모멘트는 동적 반응 및 정착시간을 지연시키므로 일반적인 항공기에 비해 매우 느리다. 본 논문에서는 사용된 비행선은 고도 500m에서 1,000m 상공을 순항하며 임무를 수행하기 위한 것으로, 그 고도에서 대기 조건은 바람이나 돌풍에 의해 영향을 받아 매우 불안정하다. 따라서 가상 질량 효과가 두드러지는 수직 평면에 작용하는 수직 돌풍이 비행선에 미치는 영향을 살펴보고, PID-제어기를 사용하여 제어기를 설계하였다. 돌풍이 작용하면 비행선은 평형 상태로 회복하지만, 회복 시간이 매우 오래 걸릴 뿐 아니라 속도에 있어 손실이 발생한다. 따라서 본 논문의 목적은 회복 시간은 빠르게 하는 것과 순항 속도로 되돌아가는 것이다. 제어기에 사용된 피라미터들은 안정 모드 해석으로부터 결정되었으며, 이때 제어 압력은 추력 및 엘리베이터 각이다.
The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. Because quality strongly influence cost and service performance on this manufacturing business field. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. The major purpose of this study is to diagnose the categorized current level of actual quality cost of local SMEs to maximize their quality management effectiveness through comparing their level with others what's expressed in early studies. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - Total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Preventive costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -. It reveals not only the lack of effectiveness on their preventive or appraisal activities but also it can reveal there were so many effective ways to prevent the failure costs properly such as some innovative investment on Factory automation includes Error Proofing and more preventive actions to improve the effectiveness of the typical management methods likes CE (Concurrent Engineering), APQP (Advanced Product Quality Planning), FMEA (Failure Mode & Effect Analysis) etc.
경상남도 산청군 주민의 간흡충 감염 현황을 파악하고 1984년 조사자료와 비교 평가하기 위하여 1992년 10월에 역학조사를 하였다. 일반 주민의 간흘충 충란양성률은 837명에 대한 조사에서 37.6%(남자 48.1%. 여자 28.6%)였다. 국민학생은 145명중 평균 9.7%(남자 9.9%, 여자 9.4%)를 보였다. 일반주민의 EPG(599 Per gram offices) 평균치는 3.310(남자 4.221 여자 1.978)이었다. 국민학생은 711(남자 620. 여자 833)을 보였으며 20대에서 7.852로 가장 높았다 EPG에 따는 감염자의 분포는 72.6%가 1,000미만의 경감염자이었고 10.000미만의 중등도까지 93 9%가 포함되었다. 중감염자로는 EPG 120.000이상에 속하는 사람이 0.3%를 차지했다. 감염자의 민물고기 생식 경험률은 90.5%. 최근 2년내 생식한 사람은 71.1%였다. 1984년과 1992년에 조사된 동일인 138명 중 반복감염자가 31명(22.5%). 음성으로 전환된 자가 35명(25.4%), 새로 양성 전환자가 22명(15.9%)이었다. 그러므로 1984년 자료와 비교할때 충란양성률은 국민학생은 줄고 일반 주민은 변화가 없었으며. 감염강도는 주민과 국민학생 모두에게서 감소하였고, 주민의 민물고기 생식습관은 변하지 않았음을 알 수 있었다. 이 지역에서는 주민들의 식습관의 변화가 앞으로 간흡충 퇴치사업에 가장 중요한 요인이다.
최근 다양한 신재생 에너지 전력원의 확산과 저전력 고효율화 추구로 인하여 전력산업의 트렌드뿐만 아니라 소모량, 제어 방식과 동작 특성 등도 다변화되고 있다. 하지만 이와 같이 다양화 되고 있는 전력 산업에서 안전을 책임지는 핵심 부품인 퓨즈는 고전적 동작 형태에서 크게 발전하지 못하였고, 이로 인하여 계속해서 화재 및 폭발사고가 발생하고 있다. 이에 본 논문에서는 고전적 퓨즈 제작 방식인 카트리지 퓨즈에서 가용체에 저 융점 금속 도금 및 고 융점 금속 도금이 퓨즈의 동작 특성과 I-T 커브의 이동에 미치는 영향을 확인하고, 퓨즈의 동작 특성을 세분화하는 두께에 따른 도금의 영향을 고찰하여 퓨즈의 다양한 동작 특성을 구현하였다. 이와 함께 저 융점 금속의 도금이 퓨즈의 정격전류 선을 낮은 정격으로 이동시키고 동작 특성을 지연 동작의 특성으로 움직여 이를 활용한 다양한 동작 특성 설계가 가능함을 제시하였다.
본 논문에서는 TV 유휴대역에서 가능한 응용서비스중 하나로서, UHF 대역(470~806 MHz)에서 동작하는 무선 영상전송 시스템을 구현하였다. 이 시스템은 RF 송수신기 모듈, 디지털 모뎀, 카메라, 스크린으로 구성된다. RF 송수신기와 디지털 모뎀을 연동하여 VGA급 화질의 카메라 영상을 2.6 인치 LCD 스크린에 표시하는 방식이다. RF 송수신기 구조는 크기와 비용을 줄이기 위해 직접변환 방식을 채택하였다. 성능지표인 Image Leakage를 향상시키기 위하여 PLL의 출력에 3차 하모닉 제거필터를 사용하였으며, DC offset 문제 해결을 위해 DAC 출력노드에 Current steering technique을 이용하여 공통모드 전압을 조절하게 하였다. 또한, 채널대역폭은 국가별 표준을 맞게 6, 7, 8 MHz 중 선택이 가능하다. 출력 파워와 수신감도는 각각 +10 dBm, -82 dBm이다. 디지털모뎀은 Kintex-7급 FPGA에서 구현하였다. QPSK와 512ch OFDM 변조를 기반으로 전송속도는 약 9 Mbps이다. 개발된 송수신 모듈을 이용하여 VGA급 화질을 무선으로 송수신하는데 성공하였다.
세계 잡초연구자들이 세계잡초학회에서 발표한 최근 연구동향을 파악하여 이를 토대로 향후 잡초연구 발전방향과 전망을 제시하고자 하였다. 제 7차 세계잡초학회는 우리나라를 포함한 59개국 520여명이 참석하였으며, 9개 분야 625편이 발표되었다. 주요 연구분야로는 제초제 저항성잡초, 잡초생태, 농경지 및 비농경지의 잡초관리, 제초제 살포기술, 비화학적 잡초방제 등이었다. 이중 제초제 저항성잡초 연구분야는 전체 30%를 점유하여 향후에도 이들 연구가 지속될 것으로 판단된다. 특히 설포닐우레아계 보다는 비선택성 제초제인 glyphosate, glufosinate-ammonium 저항성 잡초에 대한 발표가 많았다. 신규 제초제 개발은 synthetic auxin 작용기작의 제초제인 arylex, HPPD 저해제로 개발 중인 3가지 물질을 safener와의 합제 연구 등이 있었다. 그리고 세계 주곡작물인 옥수수, 밀, 벼 재배지에서 발생되는 제초제 저항성잡초에 대한 연구가 집중되었다. 특히 잡초의 non-target site에 대한 저항성 연구가 집중적이었다. 또한 우리나라에는 없는 기생잡초에 대한 연구 폭이 넓어지고 있으며, 예년에는 취급하지 않았던 비화학적 잡초방제 부문도 많았다. 향후에는 제초제 저항성 메카니즘 구명, 기생잡초 연구, 제초제 살포기술, 비화학적 잡초방제 등의 연구가 폭넓게 진행될 것으로 전망되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.