• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.381-384
• /
• 2000

In this paper, we designed and fabricated a low noise amplifier which can be used in W-CDMA. For improving input VSWR and stability an emitter inductance series feedback was used, and for acquiring higer linearity at low current DC bais by-passing method was used. Fabricated low noise amplifier had 15.33 ㏈ power gain, 2.17 ㏈ NF, -9.53 ㏈ $S_{11}$ and -35.91 ㏈ $S_{22}$ at 2.16 GHz, and +5.34 ㏈m II $P_{ 3}$ at 10 MHz channel spacing.g.g.g.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.459-460
• /
• 2020

The design of a low distortion class E amplifier with a frequency of 6.78MHz for a wireless power transfer is presented. The amplifier with a differential out is designed to reduce the harmonics of the output current. The harmonic characteristics of various types of the class E amplifiers are compared through the simulation study.

• 한국전자파학회논문지
• /
• 제13권9호
• /
• pp.882-888
• /
• 2002

본 논문에서는 공정변화와 온도변화에 의한 MMIC의 성능저하를 보상할 수 있는 바이어스 안정화 회로를 제안하였다. 제안된 바이어스 안정화 회로는 기존의 정전류원을 사용하는 바이어스 회로와의 비교를 통하여 그 효과를 검증하였다. 두 구조를 동일한 조건으로 비교하기 위해 하나의 레이아웃에 두 구조를 채택한 증폭기를 동시에 설계 및 제작을 하였다. 공정오차는 세가지 경우 NOM, MIM, MAX로 구분하고 각각에 대해 고주파 특성을 측정하였다. 측정 결과로 정전류원을 가지는 바이어스회로를 채택한 증폭기 의 1.8 GHz에서의 이득변화는 6.4 dB, Ids 변화 7 mA이지만 제안된 바이어스회로를 채택한 증폭기는 이득변화는 2.1 dB, Ids 변화 3 mA로 우수한 특성을 보임을 확인하였다. 따라서, 제안된 바이어스 회로를 적용한 MMIC는 공정상의 변화와 온도 등에 의한 동작점의 변화를 보상하여 고주파특성의 감쇠를 보상할 수 있고 궁극적으로 회로의 수율을 개선할 수 있다. 제작된 회로의 전체크기는 1.2 mm $\times$ 1.4 mm이다.

• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.624-631
• /
• 2012

본 논문은 Guanella의 1:1 transmission-line transformer와 harmonic filtering 방식을 이용한 13.56 MHz 고효율 전류 모드 D급(CMCD) 전력증폭기를 제안한다. 출력 정합 네트워크에 기존의 D급 전력증폭기의 부하 네트워크를 변형하여 harmonic filtering 방식을 포함시킴으로써 낮은 2차와 3차 고조파 특성을 얻었다. 제작된 CMCD 전력증폭기는 13.56 MHz의 CW 입력 신호를 사용하여 측정하였을 때, 13.4 dB의 전력 이득을 가지며, 44.4 dBm의 출력에서 84.6 %의 높은 PAE 특성을 나타내었다. 같은 출력에서 2차 3차 고조파는 각각 -50.3 dBc와 -46.4 dBc를 나타냈다.

• 대한전자공학회논문지SD
• /
• 제40권10호
• /
• pp.63-67
• /
• 2003

본 논문에서는 MRAM에서 사용될 수 있는 새로운 Bit Line Sense Amplifier(BLSA)를 제안하였다. 기존의 BLSA는 기본적으로 Latch형 회로를 사용하여 Memory Cell로부터의 신호를 증폭한다. 제안된 BLSA는 Cross-coupled PMOS 트랜지스터를 사용하여 회로를 단순화하였으며. 기존 BLSA의 약 85%정도의 작은 면적을 차지하면서도 시뮬레이션상에서는 같은 동작 속도를 보이고 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1555-1557
• /
• 2002

We have investigated the precharge type sense amplifier, it is suitable fur voltage sensing in a NOR type single transistor ferroelectric field effect transistor (1T FeFET) memory read operation. The proposed precharge type sense amplifier senses the bit line voltage of 1T FeFET memory. Therefore, the reference celt is not necessary compared to current sensing in 1T FeFET memory, The high noise margin is wider than the low noise margin in the first inverter because requires tile output of precharge type sense amplifier high sensitivity to transition of input signal. The precharge type sense amplifier has very simple structure and can sense the bit line signal of the 1T FeFET memory cell at low voltage.

• Current Optics and Photonics
• /
• 제7권1호
• /
• pp.33-37
• /
• 2023

Real-time adaptive control of laser output polarization is presented in a 10-W-level non-polarization-maintaining (non-PM) fiber amplifier. While the output polarization from a non-PM fiber amplifier tends to be irregular, depending on output power, time, and perturbation, closed-loop polarization control can maintain the polarization extinction ratio at higher than 20 dB. Real-time polarization control can attain the target linear polarization mostly within 1.4-25 ms and shows stability against external perturbations. This approach can satisfy both linear polarization and high output power in a non-PM amplifier, and facilitates optimization of laser performance and maintenance-free operation.

• 한국멀티미디어학회논문지
• /
• 제21권9호
• /
• pp.1068-1075
• /
• 2018

We propose a method for driving loudspeakers from class D audio power amplifiers in current mode, instead of in conventional voltage mode, which was impossible with the feedback circuitry. Unlike analog audio amplifiers, Class D audio power amplifiers have signal delay between the input and output signals, which makes it difficult to apply the feedback circuitry for current-mode driving. The idea of the pre-distortion scheme used for the compensation of the non-linearity of RF power amplifiers is adapted to remedy the impedance variation effect of the loudspeakers for current driving. The method uses the speaker model for the pre-distorter to compensate for the speaker impedance variation with frequency. The simulation and test results confirms the validity of the proposed method.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.59-67
• /
• 2018

The minimum power supply voltage of a typical bandgap current reference (BGCR) is limited by operating temperature and input common mode range (ICMR) of a feedback amplifier. A new BGCR using a bandgap voltage generator (BGVG) is proposed to minimize the effect of temperature, supply voltage, and process variation. The BGVG is designed with proportional to absolute temperature (PTAT) characteristic, and a feedback amplifier is designed with weak-inversion transistors for low voltage operation. It is verified with a $0.18-{\mu}m$ CMOS process with five corners for MOS transistors and three corners for BJTs. The proposed circuit is superior to other reported current references under temperature variation from $-40^{\circ}C$ to $120^{\circ}C$ and power supply variation from 1.2 V to 1.8 V. The total power consumption is $126{\mu}W$ under the conditions that the power supply voltage is 1.2 V, the output current is $10{\mu}A$, and the operating temperature is $20^{\circ}C$.

• ETRI Journal
• /
• 제31권5호
• /
• pp.601-603
• /
• 2009

This letter presents a high performance 2.4 GHz two-stage power amplifier (PA) operating in the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$ for IEEE 802.11g, wireless local area network application. It is implemented in InGaP/GaAs hetero-junction bipolar transistor technology and has a bias circuit employing a temperature compensation technique for error vector magnitude (EVM) performance. The technique uses a resistor made with a base layer of HBT. The design improves EVM performance in cold temperatures by increasing current. The implemented PA has a dynamic EVM of less than 4%, a gain of over 26 dB, and a current less than 130 mA below the output power of 19 dBm across the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$.