• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.89-93
• /
• 1998

In order to enlarge effection use as well as to use as a cheafut raw material for high-strength concrete admixture, we manufactured high strength admixture by using various industrial by-products and then applied to 2nd concrete pro when concrete was added MSS, strength of concrete was promoted and had a excellent property than domestic D admixture. This result could be explained that adding of MSS accelerated the famat of ettringite($C_3A$, $3CaSO_4$, $32H_2O$) like needle crystal in steam curing a also promoted to cement solidification and shorten high pre-strength display. As a result of, strength of concrete added MSS pretented, above 850kgf/$\textrm{cm}^2$ in 7 days of long-period curing.

• 한국연초학회지
• /
• 제5권1호
• /
• pp.25-33
• /
• 1983

This study was carried out to investigate the transplanting time, optimum fertilization and harvesting method, chemical contents and physical properties of burley tobacco in paddy field. The results obtained as follows. 1. It is recommendable to transplant after March. 29 to escape the frost injury. By reducing compound fertilizer and whole plant stalk curing, advanced the. last priming date by 5-8 days. 2. Total alkaloid, total nitrogen and phosphorus contents of cured leaf was comparable to those of upland-produce(1 tobacco, but potassium and chloride contents some what high. 3. Filling power and combustibility was also comparable to upland, and filling power was increased by reducing fertilizer and whole plant stalk curing. 4. In the 20o reducing fertilizer-5 Primings volt. the yield was some what decreased, but visual quality and value per 10a were high. 5. The total raw income of tobacco and rice cropping was increased 124~170% than that of rice cropping.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.475-478
• /
• 1999

The thermal properties of epoxy resin/siloxane for the electrical insulation were investigated by using dynamic DSC run method. As the heating rate increased, the peak temperature on dynamic DSC curve increased. From the linear relation on the Kissinger plot the curing reaction activation energy and pre-exponential factor could be obtained. The curing activation energy from the straight line of the Kissinger plot was 46.72 kJ/mol.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.95-103
• /
• 2012

프리캐스트 콘크리트 공법은 건식공법으로서 현장에서의 작업량을 최소화할 수 있으며 품질관리가 쉽고, 조립으로 공기단축이 가능하지만, 공기상 조기에 콘크리트 강도를 확보하기 위하여 콘크리트의 강도발현속도를 촉진시키는 증기양생법에 의존하여 왔다. 그러나 최근에 나타나고 있는 중동에서의 정치적 불안이나 국제 경제의 불안정으로 인해 지속적으로 유류비는 상승되고 있다. 따라서 본 연구에서는 프리스트레스트용 프리캐스트 콘크리트 제품 생산을 위해 저온의 조건에서 증기양생을 사용하지 않고 1일 압축강도 14MPa 이상, 설계기준압축강도 40MPa를 확보하는 콘크리트 개발을 목표로 하였다. 1종 포틀랜드시멘트와 3종 조강포틀랜드시멘트, 특수목적의 조강혼합시멘트 등 3종류의 시멘트에 대해 굳지 않은 콘크리트의 물성과 압축강도를 실험을 통해 평가하였다. 실험결과, 조강용 시멘트들은 슬럼프와 슬럼프경시변화, 공기량 확보 측면에서 불리하였지만 강도 측면에서는 목표값 이상을 확보하였으며 특히, 조강혼합시멘트가 가장 우수한 것으로 나타났다.

• Elastomers and Composites
• /
• 제49권1호
• /
• pp.59-65
• /
• 2014

본 연구에서는, $71^{\circ}C/40$ 시간의 경화 조건에서 에폭시/산무수물로 구성된 몰딩 컴파운드를 경화시키기 위하여 촉매로서 코발트 (II) 아세틸아세토네이트, 칼륨 아세틸아세토네이트, 철 (III) 아세틸아세토네이트 및 크롬 (III) 옥토에이트와 같은 다양한 금속 착화합물들을 각각 적용하였고, 몰딩 컴파운드의 기계적 강도를 향상시키기 위하여 에폭시 부/경화제 부의 무게비를 조절하였다. 실험 결과에 따라 크롬 (III) 옥토에이트 촉매는 $71^{\circ}C/40$ 시간의 경화조건에서 몰딩 컴파운드의 경화 반응을 완료시킬 뿐만 아니라 크롬 (III) 옥토에이트 촉매가 적용된 컴파운드는 상온에서 적절한 가공성을 나타내었다. 경화된 몰딩 컴파운드의 기계적 특성에서는 에폭시 부/경화제 부의 무게비가 0.9/1에서 0.5/1 사이에서 제조된 컴파운드가 가장 높은 굴곡강도를 나타내었고, 경화제 부의 함량이 증가함에 따라 더 높은 압축 강도를 나타내었다.

• 소성∙가공
• /
• 제4권3호
• /
• pp.245-256
• /
• 1995

SMC(Sheet Molding Compound), a thermoset composite material which consists of unsaturated polyester resin, fiberglass strands, fillers, and various chemical additives for curing agent, has been widely used in fabrication of structural components. The mechanical properties of molded SMS parts are strongly dependent on material flow results during compression molding process, while such flow in molds is affected by material characteristics. For numerical simulation of SMC molding process, estimation of material property of SMC must be accomplished. In this study, flow resistance of SMC was estimated through a simple compression test using a lubricant with grease oil under the constant strain rate condition at various temperatures and the result was compared with other material data available in the literature. The accuracy of the experimentally determined flow resistance was tested by finite element analyses of compression molding of SMC. Simulation results were compared with experimental results under the plane strain condition.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.222-222
• /
• 2000

PBGA(Plastic Ball Grid Array) is composed of some materials such as PCB(Printed Circuit Board), epoxy molding compound, die attach and so on. Reliability of PBGA package is weak compared with plastic packages. The weak points of reliability are the lower resistance to popcorn cracking, which is induced by moisture absorption in PCB, and the pressure cooker test corrosion, which is the basic problem due to the material characteristics of PCB. Introducing the PCB baking and the plasma treatment cleared the popcorn cracking phenomenon. The PCB baking and plasma treatment reduced the epoxy void by eliminating the source of moisture vaporization during the epoxy curing and enhanced the adhesion between PCB and epoxy. Also, plasma treatment enhanced the wettability of epoxy on PCB. The problem of corrosion is cleared using multi-functional epoxy. This type of EMC(Epoxy Molding Compound) is recommended in package using PCB as a substrate. (Received November 19, 1999)

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.95-99
• /
• 2000

PBGA(Plastic Ball Grid Array) is composed of some materials such as PCB(Printed Circuit Board), epoxy molding compound, die attach and so on. Reliability of PBGA package is weak compared with plastic packages. The weak points of reliability are the lower resistance to popcorn cracking, which is induced by moisture absorption in PCB, and the pressure cooker test corrosion, which is the basic problem due to the material characteristics of PCB. Introducing the PCB banking and the plasma treatment cleared the popcorn cracking phenomenon. The PCB banking and plasma treatment reduced the epoxy void by eliminating the source of moisture vaporization during the epoxy curing and enhanced the adhesion between PCB and epoxy. Also, plasma treatment enhanced the wettability of epoxy on PCB. The problem of corrosion is cleared using multi-functional epoxy. This type of EMC(Epoxy Molding Compound) is recommended in package using PCB as a substrate.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.181-184
• /
• 2001

This study is performed to examine the development of the plantable concrete using excellent soil compound, crushed stone, stone dust and superplasticizer. The following conclusions are drawn ; The void ratio is in the range of $25.10{\sim}31.40%$ and the compressive strength is in the range of $69{\sim}113kgf/cm^{2}$ at the curing age 28days, respectively. The plant length was showed higher block by 10% stone dust than 20%.

• Elastomers and Composites
• /
• 제22권3호
• /
• pp.195-203
• /
• 1987

본(本) 연구(硏究)는 기능성(機能性) elastomer 개발(開發)의 일환(一環)으로서 1-chlorobutadiene-butadiene copolymer(CB-BR)의 수가교(水架橋)에 의(依)한 기능성(機能性)의 향상(向上)에 그 목적(目的)을 두었으며 가교제(架橋劑)로서 3-aminopropyltriethoxysilane을 이용(利用)하여 CB-BR의 활성염소(活性鹽素)와의 용액반응(溶液反應)을 속도론적(速度論的)으로 해석(解析)하였다. 그리고 APS와 CB-BR을 실제공정(實際工程)에서 배합(配合)하여 수중가교반응(水中架橋反應)을 진행(進行)시켜 이에 따른 물성(物性) 검토(檢討)를 하므로써 다음과 같은 결론(結論)을 얻었다. 1. CB-BR은 용액계(溶液系)에서 APS와 용이(容易)하게 반응(反應)하며 이때의 반응(反應) 속도상수(速度常數) 및 활성화(活性化)에너지는 다음과 같다. 2. CB-BR+APS 수가교체(水架橋體)의 최적(最適) press 조건(條件)은 $150^{\circ}C{\cdot}20$분(分)이고 이들 가교체(架橋體)의 물성(物性)을 고무탄성체(彈性體) 이론(理論)에 의하여 가교진행(架橋進行)의 타당성(妥當性)을 검토(檢討)한 결과 이론치(理論値) q=1에 근접(近接)함을 알았다.