• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.

• Macromolecular Research
• /
• v.12 no.6
• /
• pp.564-572
• /
• 2004

Modem applications could benefit from multifunctional materials having anisotropic optical, electrical, thermal, or mechanical properties, especially when coupled with locally controlled distribution of the directional response. Such materials are difficult to engineer by conventional methods, but the electric field-aided technology presented herein is able to locally tailor electroactive composites. Applying an electric field to a polymer in its liquid state allows the orientation of chain- or fiber-like inclusions or phases from what was originally an isotropic material. Such composites can be formed from liquid solutions, melts, or mixtures of pre-polymers and cross-linking agents. Upon curing, a 'created composite' results; it consists of these 'pseudofibers' embedded in a matrix. One can also create oriented composites from embedded spheres, flakes, or fiber-like shapes in a liquid plastic. Orientation of the externally applied electric field defines the orientation of the field-aided self-assembled composites. The strength and duration of exposure of the electric field control the degree of anisotropy created. Results of electromechanical testing of these modified materials, which are relevant to sensing and actuation applications, are presented. The materials' micro/nanostructures were analyzed using microscopy and X-ray diffraction techniques.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.280-288
• /
• 1996

The purpose of this study was to assess comparatively the shear bond strength on dentin of four dentin bonding agents used in conjunction with light-curing composite resins. Clearfil New Bond, Scotchbond Multipurpose Dentin Adhesive, All-Bond 2 and X-R Bond were applicated on labial dentin surfaces just below dentin - enamel juction of bovine incisor teeth. After shear bond strength testing with the universal testing machine, the bonding interface of the specimens were observed under light stereomicroscope. Following results were obtained. 1. The shear bond strength was high in the order of B,C,D,A and group B Scotchbond Multipurpose Dentine Adhesive revealed greater bond strength than Clearfil New Bond and X-R Bond. (p<.001) 2. When using ANOVA and Duncan's multiple range test, there were statistical differences among the four groups, except between group Band C,group D and A. 3. There was no relationship between mode of failure and shear bond strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.647-650
• /
• 2001

The traffic noise from automobiles have been causing so serious problems in urban areas that the study and solutions to reduce noise and air pollution have been required. In general, Portland cement concrete(PCC) pavements have the advantage of durability and superior surface friction when compared to most dense-graded asphalt. However, data collected to date generally show PCC pavements to create more noise than asphaltic surfaces. Therefore, recent research has shown some new concrete pavement textures to be worth further examination. Exposed Aggregate Pavements have also been evaluated for noise impacts. This PCC surface is accomplished by brushing the surface of the plastic concrete to expose the aggregate, increasing the macro texture. In this study, in order to manufacture Aggregate Exposed Concrete for low noise pavements, we considered the effects of retarder agents according to dosage and curing conditions. So we tried to find out relationship between textures of surface and effects of retarder.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.04a
• /
• pp.11-15
• /
• 1990

Results of an experimental study on the manufacture and the mechanical properties of carbon fiber reinforced fly ash-cement composites are presented in this paper. The carbon fiber reinforced fly ash-cement composites using silica powder and a small amount of Ethylene vinyl acetate emulsion are prepared with carbon fiber, foaming agents and curing conditions. As a result, the manufacturing process technology of carbon fiber reinforced fly ash-cement composites is developed. And the mechanical properties such as compressive, tensile and flexural strengths and drying shrinkage of lightweight carbon fiber reinforced fly ash-cement composites are improved by using a small amount of Ethylene vinyle acetate emulsion. The development and applications of precast products and the design systems of lightweight carbon fiber reinforced fly ash-cement composites are expected in the near future.

• Herbal Formula Science
• /
• v.10 no.1
• /
• pp.143-155
• /
• 2002

In the hope of identifying anti-leukemic agents from traditional herbal medicines. this study was designed to investigate the anti-leukemic effects of the herbal medicine Jipaesan, which is composed of Angelica Dahurica and Fritillariae Verticillata. in acute promyeloid leukemia HL-60 cells. Jipaesan showed anti-proliferative effect through the induction of differentiation and apoptosis in HL -60 cells. Verticinone as a major differentiating agent and imperatorin as major apoptosis-inducing agent were isolated from the water extracts of F. Verticillata and A. Dahurica, respectively. Combined treatment of HL-60 cells with two major compounds showed synergy in the induction of differentiation. Since the induction of differentiation and/or apoptosis has therapeutic values in curing acute leukemic diseases. Jipaesan could be useful as an anti-leukemic agent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.813-816
• /
• 2001

In this paper, the dielectric properties of epoxy composites used for transformers are studied. The dielectric permittivity and loss of specimen are measured at the frequency range of 30[Hz]∼1[MHz] about temperature 20[$^{\circ}C$],100[$^{\circ}C$] and 140[$^{\circ}C$] respectively from a series of experiments. When the filler is added, between epoxy and silica is formed interface. Therefore, observed higher values of dielectric permittivity and loss in filled epoxy are attributed to MWS polarization effect. Also, glass transition temperature was shifted to higher temperature and value of dielectric permittivity and loss were decreased due to 2nd curing. Deformation of interfacial state is improved and value of dielectric permittivity and loss were decreased at low frequency region by the surface treatment of fillers with silane coupling agents.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1060-1068
• /
• 1998

The effects of various catalysts and softners on the anti-crease finish of ramie with glyoxal were investigated. A number of metal salts commonly used as Lewis acid catalysts in DP finishing of cotton with formaldehyde and N-methylol agents were screened for glyoxal treatment of ramie fabric. Various organic and inorganic acids were mixed with Lewis acid catalyst as co-catalysts to improve catalytic activity. As a result, the combination of aluminum sulfate and citric acid was proven highly effective in catalyzing the crosslinking of ramie cellulose by glyoxal under lower curing temperature. With a mixed catalyst, performance properties, such as whiteness and tearing strength as well as wrinkle recovery of treated ramie fabric were improved as compared with that treated with aluminum sulfate alone. Additional improvement of tearing strength and wrinkle recovery was achieved by applying silicons softner in the treatment bath.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.225-236
• /
• 1995

세가지 가교제 즉 황, tetramethyltyiuram disulfide (TMTD) 및 dicumyl peroxide(DCP)로 각각 가교시킨 카본블랙 충진 고분자 망상 시료들에 대해 일축연신 실험 을 통해 얻은 Mooney plot를 분석, 가교 탄성율 Gc와 엉킴 탄성율 Ge를 각각 구하였다. 각 가교계에 대하여 Gc를 통해서는 가교 사슬간의 평균분자량, 망상사슬과 카본블랙간 결합체 의 밀도 및 평균 면적 등을 Gc를 통해서는 카본블랙 첨가에 따른 관경비를 각각평가하였다. 황 가교제의 경우 Gc가 가장 높았으며 망상 사슬과 카본블랙간의 결합이 가장 잘 이루어졌 다. TMTD와 DCP가교제의 경우는 황의경우보다 카보블랙 입자와의 결합력은 낮았으나 결 합체들의 분포는 더욱 조밀하게 나타났다. 또한 Ge평가로부터는 TMTD 가교계가 카본블랙 충진에 의해 관경이 가장크게 증가함을 알수 있었다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.61-61
• /
• 1995

1993년 국내토양으로부터 분리동정된 Streptomyces속 균주중 항종양성이 우수한 균주 3주(DKM104, DKM117, DKM409)를 선정하고 이들을 대량 배양하여 종양억제인자를 분리하고 시험관내 종양세포 독성능 및 생체내 항암활성능과 이들 물질생산과 PLASMID DNA와의 관련성, $LD_{50}$등을 시험하여 새로운 항종양물질의 개발을 목적으로 하였다. 분리선별균주의 배양조건을 확립하였으며 배양여액을 국성이 적은 유기용매로부터 큰쪽으로 단계적으로 유효성분을 추출하여 Gel Chromatography를 이용하여 유효성분을 분획하였다. 시험관내 항종양능 시험은 MTT colorimetric검정법을 이용하여 $IC_{50}$값을 산정하였으며 생체내 항종양능은 마국의 NIC에서 권장하는 tumor panel system에 따랐다. 선정된 균주의 plasmid 분리는 alkalin lysis법을 채택하였으며 agarose gel electrophoresis로 plasmid profile을 시험하였다. Novobiocin등을 이용하여 Curing test를 시행하였고 독성실험은 $LD_{50}$량을 구해 항암효과 측정시에 Maximum dost로 투여하였고 최고용량을 기준으로 일정한 공비를 적응하여 3단계의 투여량을 설정하였다.(중략)