Particulate filtering facepiece respirators (PFFR) is one of the most widely used items of personal protective equipments, and a tight fit of the respirators on the wearers is critical for the protection effectiveness. In order to effectively protect the workers through the respirators, it is important to find and evaluate the ways that can be readily applicable at the workplace to improve the fit of the respirators. This study was designed to evaluate effects of mask style (cup or foldable type) and donning training on fit factors (FF) of the respirators, since these are available at various workplace, especially at small business workplace. A total of 40 study subjects, comprised of 30~50s aged male and female workers in metalworking industries, were enrolled in this study. The FF were quantitatively measured before and after training related to the proper donning and use of cup or foldable-type respirators. The pass/fail criterion of FF was set at 100. After the donning training for the cup-type mask, subjects who passed the fit test were increased from 10 to 33. Moreover, the geometric mean (GM) of FF was increased by 340% in subjects who failed the test. In addition, the training effects for the cup-type mask were significant in female and 50s aged subjects. On the other hand, although the GM of FF for the foldable-type mask was also increased after the donning training, the GM of FF for the foldable-type mask and it's increase rate were smaller as compared to the cup-type mask. Furthermore, the differences of the increase rates of the GM of FF in sex and aged of the subjects were not significantly for the foldable-type mask. The multi-distribution of leak points for the foldable-type mask may be one of causes for the less effect of training on the fit of the foldable-type mask. These results imply that the raining on the donning and use of PFFR can enhance the protection effectiveness of cup or foldable-type mask, and that the training effects for the foldable-type mask is less significant than that for the cup-type mask. Therefore, It is recommended that the donning training and fit tests should be conducted before the use of the PFFR, and that efficient tranining programs for the foldable-type mask are required.
The purpose of this study was to analyze the comfort of sports bras by style and bra cup size. The comfort of wear was measured with compression level. The displacement of breast points (BP) after wearing a sports bra was measured. Study subjects evaluated the comfort level of the compression type and encapsulation type sports bras after walking and running. The results showed that all types of experimental sports bras provided more coverage than everyday bras. The compression type bra placed more pressure on the breast, chest, and under-bust than the encapsulation type bra. The BP distance decreased for all types. The C cup subjects' breasts were raised after wearing the sports bras. The B cup subjects had less comfort with the compression style bra than C cup subjects. The racer back style bra with high neckline and small band girth placed more pressure than others. They were difficult to don and doff and the least comfortable. These results imply that the racer back compression style sports bra was uncomfortable for women with large breast, while the encapsulation style bra with the compressing panel at upper chest was the most comfortable. The bras that shortened BP distance placed more pressure on the breast. But the bra that raised and shorted the distance of BP provided better comfort for large-breasted subjects.
To provide the basic information of the brassiere development for women with poor breast, we performed the survey on their wearing habits for brassieres by comparing the poor breast type women and the normal breast type women. Also, to suggest the advanced design methods for the mould brassiere for the poor breast women, we conducted the subjective wear test of commercial mould brassieres and measured the local thickness for mould cup under various loads. As the results, the good fitness of cup and wire, the natural wear silhouette, and the adaptation of soft and stretchy material for mould cup were very important to design the comfortable brassiere for the poor breast type. The good-fitness of upper cup was the key factor for the satisfactory wear appearance of brassiere and the cup should be designed not too thick at the upper and the bust point regions.
The object of this research was to observe the female college 220 students of aged 19-24 for four years and to examine somatotypes distribution; this research intends to contribute to the fitness of clothes by studying the body distribution that affects the clothing structure. The measurement and wearing experiment for somatotypes are done years annually. The average, standard deviation and coefficient of variation was calculated by the SAS program. The research results are as follows: The three somatotypes of side view silhouette (straight type, bend-forward type, lean-back type) showed fairly even distribution. As a result of dressing experiment with the basic bodice pattern, the most influential factor on its suitability was found to be the neck area, shoulder and ease of bodice respectively. The partial body types to observe were categorized as: shoulder(normal, slope, squared), bust(A cup, B cup, C cup), hips (normal, droop, projecting). As for the result for full body type by BMI, normal type was most dominant, and for the categorization by drop, the type A which is with small breasts and large hips was most prevalent.
Journal of the Korean Society of Clothing and Textiles
/
v.23
no.6
/
pp.767-775
/
1999
The purpose of this study is to investigate the visual sensibilities of brassiere design. Brassieres were divided into three types according to connection of a cup and a strp. In each type Lace was used where the part of the cup divided by Lines which were constructed such as a mold a horizontal a vertical a mixed and an oblique design. As a result 39 brassieres were obtained. The experiment has been done for seven groups which were divided by the type line and lace with 5 semantic differential bi-polar scales and 10 specialists. The data was analyzed using the statistical SPSS package. The major findings of this research were as follows. An oblique design line in the brassiere were effective in making the breast look bigger more buxom and more voluminous. To make the breast look small and unvoluminous the use of a mold in the 1/2 cup brassiere was effective. Also a mold using lace ion the 1/2 cup brassiere had an effect in making the breast look flatter and broader.
자동차 운반용 선박(PCTC) 건조 시, 자동차를 고정시키기 위해 약 5 만 여개의 Lashing Socket(6,700 Units PCTC 기준)이 소요되는데, 이때 사용되는 Lashing Socket 은 용도 및 형태에 따라 Hole Cup, Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot, D-Ring, Crinkle Bar 등으로 구분된다. 이와 같이 다양한 종류 중에서 Hole cup 타입이 전체 적용되는 Lashing Socket 의 약 80%에 이른다. 기존에 사용되고 있는 자동용접장치는 Hole Cup 이외에는 적용이 불가능하고, 자석을 이용하여 Hole Cup 의 상부에 위치시키는 방식이었기 때문에 경량화 및 다양한 종류 및 크기의 Lashing Socket 에 적용이 가능한 자동용접장비의 개발이 요구되었다. 본 연구에서는 두께가 다른 $\phi$140 Hole Cup 및 Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot 에 적용 가능하며, 분리형 용접캐리지와 Centering Template, Magnet Jig 로 구성된 연속 및 단속 용접이 가능한 자동용접장치를 연구 개발하였다. 이를 통해 종래 Hole Cup 전용 자동용접 캐리지의 문제점을 개선하여, 작업자가 Centering Template 과 Magnetic Jig 을 이용하여 캐리지를 Hole Cup 의 중앙에 위치시키기 용이하게 하였다. 이 같은 분리형 장치 구성을 통해 Hole Cup 중앙에 캐리지 고정 작업과 용접 작업을 분리함으로써 자동용접이 진행되는 도중에 여분의 Jig를 이용하여 다른 Hole Cup 에 용접 준비를 하여 연속적인 작업이 가능하도록 하였다. 본 연구는 종래의 Hole Cup 전용 자동용접 캐리지의 문제점을 개선한 분리형 용접 캐리지를 개발함으로써 아래와 같은 결과를 얻었다. 1. 용접 캐리지를 포함하여 각 부분별 분리를 통해 작업자가 1 회 이동 시 필요로 하는 중량을 감소시켜 장비의 이동 및 제어가 쉽다. 2. Magnetic Jig 를 Centering Template 에 결합하고, Template 의 Jig 를 Lashing Socket 에 결합함으로써 손쉽게 Lashing Socket 의 중심부를 찾을 수 있으므로 용접 캐리지의 정확한 센터 고정이 가능하다. 3. 엔코더에 의한 1 회전을 검출함으로써, 작업 종료 후, 어떤 위치에서나 작업 재개가 가능하며 원점 복귀 작업이 불필요하다. 또한 엔코더에 의한 거리 설정으로 용접 속도에 상관없이 동일한 거리만큼 오버랩 용접이 가능하다. 4 디지털 방식으로 용접 조건의 입력이 가능하고, 용접 조건을 D/B 화 함으로써 Control Panel 상에서의 자동 제어가 가능하다. 이를 통해 연속 용접 또는 단속 용접이 가능하므로 다양한 형태의 Lashing Socket 을 자동 용접할 수 있는 효과가 있다. 이상의 결과를 통해 본 장비가 Fig.2 의 3 가지 종류의 Lashing Socket 용접에 효과적인 장비임을 확인할 수 있었다.
Journal of the Korean Society of Clothing and Textiles
/
v.36
no.8
/
pp.791-801
/
2012
We performed an assessment of wearing, purchasing, satisfaction, and the fit of brassieres according to body and breast type for college women to provide basic data on the manufacture of an ergonomic brassiere. The classifications of domed and conical breast type or projecting and conical breast type were unclear. Flat breast were dissatisfied with the shape of small and flat, and drooping breast were dissatisfied with the shape of big, projected, and drooping. In purchasing a brassiere, the majority of subjects were ignorant of their brassiere size, and over 80% of the subjects bought a brassiere without trying it on. Over 50% of those surveyed said they found it difficult to buy a well-fitted brassiere, particularly for the flat and drooping breast type. Over 70% of those surveyed wore a brassiere of 3/4 cup size, the slim body type wore a brassiere of 1/2 cup size; however, the obese body type wore a brassiere of full-cup size. The flat-breast or slim-body wore a brassiere of a thick pad type but projecting-breast or drooping breast wore brassiere of a thin pad type. Many of the subjects wore an unfitted brassiere in cup size and under bust size. In the classification of breast type, there were slight differences between the breast type that they recognized and the breast type that they were shown. There were distinctions in function, satisfaction, and fitness based on breast type. Therefore, the development of an ergonomic brassiere should considered the characteristics of breast type for fitness and comfort.
There was a difference in recognition of respirators according to the educational performance environment. they were showed higher recognition of respirators of group by internal and external mix trainer, less than 6 months, over 1hour, more than 5 times, variety of education. To identify the relationship between types of job classification(typical and atypical)and the levels of recognition of respirators, a total of 153 workers in a business workplace. mainly, typical workers showed higher recognition of respirators than atypical workers. Training of correct wearing showed high demands both typical and atypical workers. Descriptive statistics(SAS ver 9.2)was performed. the results of recognition of respirators were analyzed the mean and standard deviation by t-test, and anova, fit factor is used geometric means(geometric standard deviation), paired t-test, Wilcoxon analysis(P=0.05). Particulate filtering facepiece respirators (PFFR) is one of the most widely used items of personal protective equipments, and a tight fit of the respirators on the wearers is critical for the protection effectiveness. In order to effectively protect the workers through the respirators, it is important to find and evaluate the ways that can be readily applicable at the workplace to improve the fit of the respirators. This study was designed to evaluate effects of mask style (cup or foldable type) and donning training on fit factors (FF) of the respirators, since these are available at various workplace, especially at small business workplace. A total of 40 study subjects, comprised of employment type workers in metalworking industries, were enrolled in this study. The FF were quantitatively measured before and after training related to the proper donning and use of cup or foldable-type respirators. The pass/fail criterion of FF was set at 100. After the donning training for the cup-type mask, fit test were increased by 769%. but foldable-type mask was also increased after the donning training, the GM of FF for the foldable-type mask and it's increase rate were smaller as compared to the cup-type mask. Furthermore, the differences of the increase rates of the GM of FF in employment type of the subjects were not significantly for the foldable-type mask. These results imply that the raining on the donning and use of PFFR can enhance the protection effectiveness of cup or foldable-type mask, and that the training effects for the foldable-type mask is less significant than that for the cup-type mask. Therefore, it is recommended that the donning training and fit tests should be conducted before the use of the PFFR, and listening to workers opinion regularly.
This study provides basic reference data for brassiere wearing conditions, design preferences of new silver women (50s-60s) and development of brassiere products. We compiled and compared 163 pieces of brassiere (considering of 105 domestic general brassieres and 58 foreign silver brassieres) analyzed using SPSS Statistics 21 program. A survey was then conducted on the actual wearing, purchasing conditions, design preferences for 176 females (50s-60s). The result of this study are as follows: First, comparing actual product conditions (domestic general products and foreign silver products), the ratio of full cup in cup height, V-shape type in neckline shape, long type in front-end length, wide type in wing width, U-shape type in shoulder strap form, wide type in shoulder strap width, no-wire brassieres in breast wire type, all-in-one type in shoulder strap separation, back type in closure type appeared higher than other types of brassiere in domestic general product. Second, a study also showed that 60s women's wearing time is lower than 50s women's; however, 60s women expressed a higher figure and preference for the purchasing ratio in the department store, full cup in cup height, short type in length of brassieres, wide type in wing width, U-shape in shoulder strap form, small type in shoulder strap width, back type in closure type and no-wire brassieres than those in their 50s. It was found they prefer fabric with a high natural content, nude tone color without decoration & pattern and camisole brassieres.
Liquid atomization by means of a spinning cup is widely used as a device for combustion, in cooling and spray drying. In this study, the blowing type rotary atomizer was experimental carried out the investigations on the characteristics of the blowing type rotary atomizer which is an air flow energy of blower instead of an electric motor most commonly used to a driven energy. The analysis on the rotary cup speed, air velocity with the blower conditions was performed and also the drop size was measured using LDPA. It was tried to analyzed on air-nozzle size and liquid flowrate as the result. It was found that the increase of the relative velocity between liquid and air improve significantly atomization liquid, and decrease of the liquid flowrate improved the maximum drop size though the mean drop size is really the same.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.