• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.154-159
• /
• 2006

It is essential to understand the decomposition characteristics for developing the optimum anaerobic digestion system of organic wastes. In this study, BMP (Biochemical Methane Potential) test using serum bottle was conducted to evaluate the anaerobic degradability of fish offal. 3 different groups of fish offal including waste from mackerel and hairtail handling except viscera and fish viscera were chosen for the substrates. Grinded fish offal was transferred anaerobically to serum bottle in amounts of 50 ml, 100 ml and 150 ml, respectively. BMP test was carried out in triplicate. Cumulative methane production and methane production rate depending on incubation time were evaluated. These results varied depending on substrate characteristics. The average values of ultimate methane yield ranged between $420ml{\cdot}CH_4/g{\cdot}VS$ and $490ml{\cdot}CH_4/g{\cdot}VS$, and the methane production and degradation rate of viscera were higher than those of other parts of fish offal. According to the analysis of elemental composition, average C/N ratio of fish offal used in this study was 5.2. Theoretical ultimate methane yield calculated from elemental composition was $522ml{\cdot}CH_4/g{\cdot}VS$. Biodegradability was calculated as 0.847.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.375-380
• /
• 2013

The concept of safe yield places an emphasis on balancing groundwater withdrawal with groundwater recharge but ignores naturally occurring groundwater discharge. Because streams and their alluvial aquifers are closely linked in terms of water supply and water quality, to be properly understood and managed they must be considered together. Therefore, some districts in Kansas have reevaluated their safe-yield policies to account for natural groundwater discharge and stream-aquifer interactions by amending their safe-yield regulations to include a portion of baseflow as the minimum desirable streamflow (MDS). This study proposes a modified safe-yield policy in which the drought flow is chosen as the MDS. Baseflow separation was conducted from streamflow hydrograph and the results are presented as a flow-duration curve. The exploitable groundwater can be determined by subtracting MDS from the cumulative baseflow. This method was tested in the Musimcheon watershed, which was validated for streamflow using the SWAT-K model. The annually averaged exploitable groundwater in the whole watershed was estimated to be 86 mm. The exploitable groundwater amounts were also estimated for each subwatershed in the Musimcheon watershed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.283-289
• /
• 1993

Effect of sulfur dioxide gas on the growth and yield of soybean growing in the On-San Industrial Complex area was evaluated using the isoquant contour lines of the sulfur dioxide in air of the area. Average concentration of sulfur dioxide monitored in the Industrial Complex from July 17 to September 17 was 0.77mg / 100cm$^2$ PbO$_2$/day. Soil pH ranged from 4.2 to 6.5. Yield losses were estimated by 5～30% due to the effect of sulfur dioxide. Liming could relieve the yield reduction to some extent. The cumulative $SO_2$ concentration, as measured by PbO$_2$ method, for two months of active vegetative growth to early ripening stage has shown a good negative correlation with soybean yield. But, pod number and 100 grain weight did not show the correlation with the concentration of sulfur dioxide. These results suggest that sulfur dioxide affect chronically and cumulatively the growth of soybean plants.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.2
• /
• pp.145-149
• /
• 2008

Anaerobic co-digestion of swine manure and food waste for biogas production was performed in serum bottles at various volatile solids(VS) contents and mixing ratios of two substrates(swine manure:food waste=$100:0{\sim}0:100$). Through kinetic mode of surface methodology, the methane production was fitted to a Gompertz equation. The ultimate methane production potential of swine manure alone was lower than that of food waste regardless of VS contents. However, it was appeared that maximum methane production potentials in 80 : 20 of the mixing rate at VS 3% was enhanced at 144.7%, compared to its only swine manure. The potential increased up to 815.71 ml/g VS fed as VS concentration and food composition increased up to 3.0% and 20%, respectively. The ultimate amount of methane produced had significantly a positive relationship with that of methane yield rate. Overall, it would be strongly recommended that feeding stocks use 20% of mixing ratio of food waste based on VS 3% contents when operating the anaerobic reactor on site at $35^{\circ}C$ if not have treatment of its anaerobic waste water.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4475-4481
• /
• 2014

A histogram equalization method have been used traditionally for the image enhancement of low quality images. This uses the transformation function, which is a cumulative density function of an input image, and it has mathematically maximum entropy. This method, however, may yield whitening artifacts. This paper proposes the weighted histogram equalization method based on histogram equalization. It has Weber-Fechner's law for a human's vision characteristics, and a dynamic range modification to solve the problem of some methods, which yield a transformation function, regardless of the input image. Finally, the proposed transformation function was calculated using the weighted average of Weber-Fechner and the histogram equalization transformation functions in a modified dynamic range. The simulation results showed that the proposed algorithm effectively enhances the contrast in terms of the subjective quality. In addition, the proposed method has similar or higher entropy than the other conventional approaches.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.291-298
• /
• 2014

Plastic film houses are directly associated with increases in plant growth and yield of vegetable crops through a year round cultivation, however, at the same time temperature stresses are one of fates which are difficult to avoid during crop growth. The objective of this study was to examine the translocation and distribution of minerals (N, P, K) and carbohydrates as well as seasonal fluctuation of mineral uptake and carbohydrate production in cucumber plant grown under moderately high temperature. The temperature treatments consisted of 2-layers film houses (optimal temp.) and 3-layers (high temp.). Shoot growth of cucumber plants were linearly increased until 14 weeks after transplanting (WAT) without any significant difference between both temperatures, and the slowdown was observed from 16 WAT. The level of soluble sugar and starch was slightly greater in optimal temperature compared to the high. Cumulative accumulation of soluble sugar was significantly different before and after 12 WAT in both treatments, whereas starch level represented a constant increase. Monthly production of soluble sugar reached the peak between 12 to 16 WAT, and starch peaked between 4 to 8 WAT and 12 to 16 WAT. Total uptake of N, P and K in optimal and high temperature conditions was $18.4g\;plant^{-1}$ and 17.6 for N, 4.7 and 5.1 for P, and 37.7 and 36.2 for K, respectively, and the pattern of monthly N uptake between optimal and high temperatures was greater in early growth stage, whereas was greater in mid growth stage in both P and K. Thus, this study suggests that moderately high temperature influences much greater to photosynthesis and carbohydrate production than plant biomass and mineral uptake. On the basis of the present result, it is required to indentify analysis of respiration rates from plant and soil by constantly increasing temperature conditions and field studies where elevated temperatures are monitored and manipulated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.15-22
• /
• 2003

The fatigue crack growth model is derived and the retardation model is proposed. The fatigue crack growth model considers the residual plastic stretch on the crack surface which results from the plastic deformation at the tip of fatigue crack. The fatigue crack growth rate is calculated by using the cumulative fatigue damage and plastic strain energy in the material elements at the crack tip. This model gives the crack growth rate in reasonable agreement with test data for aluminum alloy AL6061-T651 and 17-4PH casting steel. The fatigue crack growth retardation model is based on the residual plastic stretch produced from a tensile overload which reduced the plastic strain range of the following load cycles. A strip-yield model of a crack tip plasticity is used for the calculation of a plastic zone size. The proposed retardation model characterized the observed features and delayed retardation of the fatigue crack growth under tensile overload.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.202-213
• /
• 1997

In order to find out a high potential black soybean lines, of which demand has been increasing in Korea, twenty eight local cultivars were evaluated on agronomic characteristics and the classification of the cultivars was made by the cluster analysis. Days to maturity and days to growing of black soybeans were widely ranged from 58 to 82 days, and 117 to 148 days, respectively. Late maturing group showed over 140 maturity days, and heavy 100 seed weight. There was shown low yield potential in late maturing group, and growing days was positively correlated with flowering days, days to maturity, 100-seed weight and stem length, respectively. From the principal component analysis upper two components composed 76.5％ cumulative eigen value to total. Nine varietal groups were identified in relations to their affinity of the black soybeans. Selected black soybeans, Namhae-2 and Hamyang-l were field-tested and those characteristics of many pod, small seed and high yield were found out to be suitable for sprouting.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.4
• /
• pp.213-219
• /
• 1973

Effects of three slow-release nitrogen fertilizers (Sulfur-coated urea, (SCU) Jin Hae Chemical Co. Korea(JHC); Tennessee Valley Authority. U.S.A(TVA); METAP, Japan) on the yield and nitrogen uptake of IR667 (Suwon 213) were investigated comparing with urea split application under the field condition with early and usual saeson cultivation. 1. SCU(JHC) was not superior than urea split application in yield and nitrogen nutrition due to early release of nitrogen. 2. SCU(TVA) outyielded urea split by 10% showed always highest nitrogen content in straw and most balanced relative cumulative curve of nitrogen uptake or dry matter yield. 3. At ear formation stage SCU(TVA) showed specially high nitrogen content which was highly correlated with number of grain per $m^2$ of field. 4. Only SCU(TVA) showed one peak curve of nitrogen uptake rate at ear formation stage while others showed two peak pattern. 5. nitrogen fertilizer recovery of slow-release fertilizers was higher than urea split in early season cultivation and SCU (TVA) (46.0) was higher but SCU(JHC) (38.9) was similar in compare with urea split(37.1) in usual season cultivation. 6. Most promising slow-release nitrogen to match plant requirement seems to be one mixed of various slow-release fertilizers having different release pattern.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.465-481
• /
• 2022

Rock grouting is important to improve the waterproof efficiency and mechanical strength of rock medium with joint for utilizing the underground rock space such as tunnel. The grouting materials typically has been used the cement materials, which represent Bingham fluid model. This model can express the relationship of viscosity and yield strength. In addition, it is dependent with elapsed time. The grouting injection performance can be deteriorated with an increase of viscosity and yield strength in the grouting process if the time dependence is ignored. Therefore, in this study, the characteristics of viscosity and yield strength were investigated according to water-cement ratio and time dependence in the laboratory test. Numerical simulation was carried out to investigate the grouting performance according to the time dependence of characteristics in terms of the viscosity model. Given the results, the grouting injected distance and cumulative grout volume were significantly decreased when the time dependence of grouting material was considered. This study, considering the characteristics according to the time dependence of viscosity and yield strength, will be meaningful to the design of grouting injection in field applications.