• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.1-10
• /
• 2014

Purpose: This research was conducted to evaluate feasibility of a crank-type walking cultivators for weeding in furrowed upland. Methods: A walking cultivator developed by RDA was selected and evaluated with its working speed (S), cultivation depth (CD) and weeding performance (WP). The evaluation was performed in upland field on July and August, 2012. Also kinematic analysis of the machine was performed to draw out design improvements. Results: S in flat, uphill and downhill were about 0.11 m $s^{-1}$, 0.11 m $s^{-1}$, and 0.13 m $s^{-1}$ respectively. It was found that S had a low relevance with user conditions. The CD was 35 ~ 40 mm which was satisfied with the RDA guide for weeding machine. A wide variation was observed in values of WP depending on the growth stages of weeds and field conditions. The cultivator showed low performance in eliminating the well-grown weeds. Kinematic simulation revealed that high forward speed caused a high ratio of un-weeded area. Conclusions: The weeding performance of the cultivator was satisfactory for weeds in early growth stage but it showed difficulties in handling on up-slope and in entering up-land. Specifically, the weight of the cultivator was judged as overweight for female workers. The crank-hoe type cultivator was judged as unsuitable for small walking type machine due to weight of the four-bar linkage system. Kinematic analysis revealed that the ratio of crank speed to the ground speed must be 850 rpm s $m^{-1}$ (255 rpm based on 0.3 m $s^{-1}$) or greater to avoid uncultivated area. Selection of forward speed is a decisive factor in designing the weeding cultivator.

• Journal of Trauma and Injury
• /
• 제30권3호
• /
• pp.80-86
• /
• 2017

Purpose: To analyze the data of patients who suffered trauma in a cultivator accident and visited the trauma center in rural Gyeongbuk Province. Methods: We retrospectively reviewed the medical records and Korean Trauma Data Bank data of 120 patients who suffered cultivator-related traumas and visited the rural regional trauma center in Gyeongbuk Province from January to December 2015. Results: The age of the patients ranged from 35 to 96 years (mean, 70 years). Ninety-one (75.8%) patients were men, and twenty-nine (24.2%) were women. Most of the patients were in their 70s (46 men [50.5%] and 13 women [44.8%]). In total, 113 patients (94.1%) arrived at the regional trauma center by ground transport and 7 (5.9%) arrived by air transport. Ninety-eight patients (81.7%) were transported to the regional trauma center directly from the scene of the accident, and twenty-two (18.3%) were transferred from another medical institute. The mean time from the accident to arrival at the emergency department was 139 minutes, and only 46 patients (38.3%) arrived within 1 hour. Twelve (10.0%) patients died, including two deaths on arrival and two post- cardiopulmonary resuscitation deaths in the emergency department. All deaths were of male cultivator operators. The causes of death were shock (hypovolemic, traumatic, or septic), subdural hematoma (open), hemothorax, rhabdomyolysis, and pneumonia. Conclusions: As the government - led regional trauma center project is on process, it would be clinically important to summarize the initial outcome of cultivator injuries, which are characteristically found more in regional trauma centers in the rural area, and have high mortality. Based on this study, in the future, it will be necessary to follow up and analyze more number of patients and to construct accurate database about trauma cases related to cultivator in Gyeongbuk region.

• 농업과학연구
• /
• 제48권4호
• /
• pp.1027-1037
• /
• 2021

This study aims to evaluate the performance of an electric multi-purpose cultivator through a simulation analysis. The simulation model was developed using commercial software, Simulation X, by applying the specifications of certain parts, such as an electric motor, a battery, and so on. The input parameter of the simulation was the engine load data according to the rotary tillage level using a conventional multi-purpose cultivator. The data were collected by configuring a load measurement system, and the load cycle was developed by repeating the data collection process under the most severe conditions. The average output engine torque values of conventional multi-purpose cultivator were 10.7, 13.0, 9.4, and 11.2 Nm in the D1P1, D1P2, D2P1, and D2P2 conditions, respectively. As a result of the simulation, the maximum values of the motor torque, rotational speed, and power of the electric multi-purpose cultivator were 16.8 Nm, 2,033.3 rpm, and 3.3 kW, respectively, and the motor was driven in sections within 70, 68, and 45% of the maximum output range. The rate of decrease of the battery state of charge (SOC) level per minute was approximately 0.6%, and it was possible to supply electric power to the motor for 9,550 sec. In the future study, research to verify and improve simulation models of electric multi-purpose cultivators should be conducted.

• 한국자원식물학회지
• /
• 제9권1호
• /
• pp.63-69
• /
• 1996

양파 재배(栽培)에 있어서 기계(機械)를 이용(利用)하여 수확(收穫)의 성력화(省力化)로 노동력(勞動力)과 생산비(生産費)를 절감(節減)하기 위해 본(本) 시험(試驗)을 수행(遂行)한 결과(結果)는 다음과 같다. 1. 기계(機械)를 이용한 양파 굴취수확(掘取收穫)은 관행인력굴취수확(慣行人力掘取收穫)에 비해 트랙터 후부(後部)에 굴취기(掘取機)를 부착(附着)해 서 수확(收穫)한 굴취수확(掘取收穫)이 90-93%로 성력효과(省力效果)는 가장 좋았다. 2. 트랙터 후부(後部)에 굴취기(掘取機)를 부착(附着)한 수확기(收穫機)의 성력효과(省力效果)는 관행인력수확(慣行人力收穫)에 비해 37%의 작업시간(作業時刊)을 절감(節減)하여 37%의 작업비(作業費)를 절멸(節滅)했다.

• 한국자원식물학회지
• /
• 제8권3호
• /
• pp.297-302
• /
• 1995

감자 재배(栽培)에 있어서 기계(機械)를 이용(利用)하여 수확(收穫)의 생력화(省力化)로 생산비(生産費)를 절감(節減)하기 위해 본(本) 시험(試驗)을 수행(遂行)한 결과(結果)는 다음과 같다. 1. 기계(機械)를 이용(利用)한 감자 굴취수확(掘取收穫)은 관행인력수확(慣行人力收穫)에 비해 트랙터 후부(後部)에 굴취기를 이용(利用)한 것이 94%로 생력효과(省力效果)에서 관행인력수확(慣行人力收穫)에 비해 42-45%의 노력시간(努力時間)을 절약(節約)함으로 42-45%의 작업비(作業費)를 절감(節減)했다.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.60-67
• /
• 2018

Recently, environment-friendly cultivation technology is popular. A cultivator is useful for turning over the stall bedding in a poultry farm. In this study, a rotary-based cultivator with a rechargeable battery was developed for eco-friendly management of broiler chickens. From the results of the test run, the clustered stall bedding was approximately divided into up and down layers. Through experimental evaluation, the working width was more than 60 cm, and the noise was less than 80 dB. The output of the motor was 400 W, and the speed of rotation was 3000 rpm. Electric battery type cultivators are expected to be widely used in the livestock industry.

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.139-145
• /
• 2006

A previous study showed that the handle vibration of a walking type cultivator can be reduced by adding a mass to the handle. This study was conducted to determine the optimum magnitude and location of the mass to be added for the same cultivator. The possible locations of added mass were determined by investigating nodal points of the handle vibration by an ODS (operational deflection shapes) test at an engine frequency of 52 Hz. The optimum location was then determined as one that moved the nodal points to the hand grip of the handle bar. To determine the optimum magnitude of the mass, the possible locations were added by a mass from 0.2 to 2.0 kg in an increment of 0.2 kg. The optimum magnitude was then determined as a mass which minimized the vibration level at the hand grip. For the case of this study, the z-axis vibration at the hand grip was reduced from $2.67m/s^2\;to\;0.88m/s^2$ resulting in a reduction of 67% and the total vibration from $4.09m/s^2\;to\;3.27m/s^2$ resulting in a 20% reduction by adding an optimum mass to the optimum location.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.274-282
• /
• 2014

Purpose: In this study, a hybrid power system was developed for agricultural machines with a 20-KW output capacity, and it was attached to a multi-purpose cultivator to improve the performance of the cultivator, which was evaluated using output tests. Methods: The hybrid system combined heterogeneous sources: an internal-combustion engine and an electric power motor. In addition, a power splitter was developed to simplify the power transmission structure. The cultivator using the hybrid system was designed to have increased fuel efficiency and output power and reduced exhaust gas emissions, while maintaining the functions of existing cultivators. Results: The fuel consumption for driving the cultivator in the hybrid engine vehicle (HEV) mode was 341 g/KWh, which was 36% less than the consumption in the engine (ENG) mode for the same load. The maximum power take off output of the hybrid power system was 12.7 KW, which was 38% more than the output of the internal-combustion engine. In the HEV mode, harmful exhaust gas emissions were reduced; i.e., CO emissions were reduced by 36~41% and NOx emissions were reduced by 27~51% compared to the corresponding emissions in the ENG mode. Conclusions: The hybrid power system improved the fuel efficiency and reduced exhaust gas emissions in agricultural machinery. Lower exhaust gas emissions of the hybrid system have considerable advantages in closed work environments such as crop production facilities; therefore, agricultural machinery with less exhaust gas emissions should be commercialized. However, the high manufacturing cost and complexity of the proposed system are challenges which need to be solved in the future.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.447-452
• /
• 2015

A hybrid power system was developed for agricultural machines with a 20kW output capacity, and it was attached to a multi-purpose cultivator to improve the performance of the cultivator. The hybrid system combined heterogeneous sources: an internal-combustion engine and an electric power motor. In addition, a power splitter was developed to simplify the power transmission structure. The cultivator using a hybrid system was designed to have increased fuel efficiency and output power and reduced exhaust gas emissions, while maintaining the functions of existing cultivators. The fuel consumption for driving the cultivator in the hybrid engine vehicle (HEV) mode was 341g/kWh, which was 36% less than the consumption in the engine (ENG) mode for the same load. The maximum power take off output of the hybrid power system was 12.7kW, which was 38% more than the output of the internal-combustion engine. In the HEV mode, harmful exhaust gas emissions were reduced; i.e., CO emissions were reduced by 36~41% and NOx emissions were reduced by 27~51% compared to the corresponding emissions in the ENG mode. The hybrid power system improved the fuel efficiency and reduced exhaust gas emissions in agricultural machinery. The hybrid system's lower exhaust gas emissions have considerable advantages in closed work environments such as crop production facilities. Therefore, agricultural machinery with less exhaust gas emissions should be commercialized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.475-476
• /
• 2009

Remote Control System based on Sproute Cultivator using LED characteristics was realized. It was carried out to investigate into the effect of LED Control with the physiological activity of sprouts. We have also composed a Combined Automatic Control System possible for the control of temperature and humidity at the same time. The applied LEDs for measurement are blue, green, red, white, yellow leds. And we producted the remote control OS using Linux and defined the characteristics of automatic control about sprouts.