• Korean Journal of Environmental Biology
• /
• v.32 no.1
• /
• pp.58-67
• /
• 2014

The outdoor mass cultivation is not possible for microalgae in Korea all year round, due to cold winter season. It is not easy to maintain proper level of productivity of microalgae even in winter. To prevent a drastic decrease of temperature in a greenhouse, two layers were covered additionally, inside the original plastic layer of the greenhouse. The middle layer was made up of plastic and the inner layer, of non-woven fabric. Acrylic transparent bioreactors were constructed to get more sunlight, not only from the upper side but also from the lateral and bottom directions. In winter at freezing temperatures, six different culture conditions were compared in the triply covered, insulated greenhouse. Wastewater after anaerobic digestion was used for the cultivation of microalgae to minimize the production cost. Water temperature in the bioreactors remained above $10^{\circ}C$ on average, even without any external heating system, proving that the triple-layered greenhouse is effective in keeping heat. Algal biomass reached to 0.37g $L^{-1}$ with the highest temperature, in the experimental group of light-reflection board at the bottom, with nitrogen and phosphorus removal rate of 92% and 99%, respectively. When fatty acid composition was analyzed using gas-chromatography, linoleate (C18 : 3n3) occupied the highest proportion up to 61%, in the all experiment groups. Chemical oxygen demand (COD), however, did not decrease during the cultivation, but rather increased. Although the algal biomass productivity was not comparable to warm seasons, it was possible to maintain water temperature for algae cultivation even in the coldest season, at the minimum cost.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.189-195
• /
• 2020

This research was carried out to find the proper number of stem training and position of fruit setting that can be stably produced for the cultivation in small and medium types of watermelon during winter. The treatments for the number of stem training were 2-, 3-, 4-stems, respectively. Growth characteristics (plant height, stem diameter, no. of node, etc.) by number of stem training were higher in 2-stem than in 3-4-stem. However, Fruit characteristics such as weight, length, width were high in the 4-stem. There is no significant difference between the soluble solids and fruit setting rate depending on the stem training. The position of fruit setting were three points: 2nd, 3rd, 4th female flower positions. The fruit setting is one fruit per plant. The average fruit setting nodes of 2^nd, 3^rd and 4^th female flowers were 11.5, 15.8 and 23.1 nodes, respectively. The 4^th female flower was 0.8 kg heavier than 2^nd female flower because of its increased weight as position of fruit setting was higher. However, the soluble solids decreased as the position of fruit setting increased, with the second female flower being 1.3°Bx higher than the 4^th female flower. The Fruit setting rate was no significant difference. Considering the growth and fruit characteristics, it is believed that the small and medium-sized watermelon in winter will have a high quality production of watermelon when the stem training is 3-stem and the position of fruit setting is 3^rd female flower. However, it is thought that additional studies are needed to stabilize the income of watermelon-growing farms, such as planting distance and adhesion of small and medium-sized varieties.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.22-28
• /
• 2005

The use of blankets to preserve heat in oriental melon cultivation is a common practise without artificial heating and warming systems. Efficiency of blanket decreased with annually usage. This experiment was conducted to investigate the effect of double layer nonwoven fabrics on heat conservation, plant growth, fruit quality and yield of oriental melon in greenhouse. The results were compared among the non-woven fabrics of 9+3, 6+6, 6+3 and 12 ounce from transplanting to April 20, 2001, 2002. Night temperature within tunnel was high at 9+3, 6+6, 6+3 and 12 ounce in order. In plant growth, stem length, leaf numbers and exudate, under double layer nonwoven fabrics were better than single layer blanket of 12 ounce especially, 9+3 double layer blanket was the best. Fruit weight, flesh thickness, soluble solid and marketable yield rate remained same in all treatments. Fermented fruit rate was the highest in 12 ounce as $32.9\%,\;19.6\%\;under\;9+3,\;17.1\%\;under\;6+6,\;16.6\%$ under 6+3 double layer nonwoven fabric, respectively. Compared to 2,260kg yield per 10a of 12 ounce single layer nonwoven fabrics, $7\%$ was increased under 9+3 but $3\%\;and\;13\%$ were decreased under 6+6 and 6+3 double layer nonwoven fabrics, respectively. Compared to income, 4,499-thousand-won per 10a, of 12 ounce single layer blanket, $13\%\;and\;3$ were increased under 9+3 and 6+6 double layer nonwoven fabrics, respectively. Whereas, $10\%$ decreased under 6+3 double layer nonwoven fabrics. From this results it is evident that 9+3 double layer nonwoven fabrics was the best for thermokeeping, fruit quality, and was most economic under non heating system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1195-1206
• /
• 2011

This study was conducted to apply LCA (Life cycle assessment) methodology to lettuce (Lactuca sativa L.) production systems in Namyang-ju as a case study. Five lettuce growing farms with three different farming systems (two farms with organic farming system, one farm with a system without agricultural chemicals and two farms with conventional farming system) were selected at Namyangju city of Gyeonggi-province in Korea. The input data for LCA were collected by interviewing with the farmers. The system boundary was set at a cropping season without heating and cooling system for reducing uncertainties in data collection and calculation. Sensitivity analysis was carried out to find out the effect of type and amount of fertilizer and energy use on GHG (Greenhouse Gas) emission. The results of establishing GTG (Gate-to-Gate) inventory revealed that the quantity of fertilizer and energy input had the largest value in producing 1 kg lettuce, the amount of pesticide input the smallest. The amount of electricity input was the largest in all farms except farm 1 which purchased seedlings from outside. The quantity of direct field emission of $CO_2$, $CH_4$ and $N_2O$ from farm 1 to farm 5 were 6.79E-03 (farm 1), 8.10E-03 (farm 2), 1.82E-02 (farm 3), 7.51E-02 (farm 4) and 1.61E-02 (farm 5) kg $kg^{-1}$ lettuce, respectively. According to the result of LCI analysis focused on GHG, it was observed that $CO_2$ emission was 2.92E-01 (farm 1), 3.76E-01 (farm 2), 4.11E-01 (farm 3), 9.40E-01 (farm 4) and $5.37E-01kg\;CO_2\;kg^{-1}\;lettuce$ (farm 5), respectively. Carbon dioxide contribute to the most GHG emission. Carbon dioxide was mainly emitted in the process of energy production, which occupied 67~91% of $CO_2$ emission from every production process from 5 farms. Due to higher proportion of $CO_2$ emission from production of compound fertilizer in conventional crop system, conventional crop system had lower proportion of $CO_2$ emission from energy production than organic crop system did. With increasing inorganic fertilizer input, the process of lettuce cultivation covered higher proportion in $N_2O$ emission. Therefore, farms 1 and 2 covered 87% of total $N_2O$ emission; and farm 3 covered 64%. The carbon footprints from farm 1 to farm 5 were 3.40E-01 (farm 1), 4.31E-01 (farm 2), 5.32E-01 (farm 3), 1.08E+00 (farm 4) and 6.14E-01 (farm 5) kg $CO_2$-eq. $kg^{-1}$ lettuce, respectively. Results of sensitivity analysis revealed the soybean meal was the most sensitive among 4 types of fertilizer. The value of compound fertilizer was the least sensitive among every fertilizer imput. Electricity showed the largest sensitivity on $CO_2$ emission. However, the value of $N_2O$ variation was almost zero.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.10-16
• /
• 2021

The consumption of fresh-cut agricultural materials is increasing due to increased public interest in health and the increase of single-person households. Most fresh-cut agricultural materials can be eaten without heating, thus easily exposing the consumer to food-borne pathogens. As a result, food-borne diseases are increasing worldwide. In the analysis of food-borne pathogens, it is important to detect the strains, but this is time consuming and laborious. Alternative detection methods that have been introduced, include polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE), which is performed without prior culturing. Samples of fresh-cut agricultural materials, such as vegetables, were analyzed by the culture-based method. In 129 samples, non-pathogenic Escherichia coli (3.9%), Bacillus cereus (31.8%), Clostridium perfringens (5.4%), Yersinia enterocolitica (0.8%), and enterohemorrhagic E. coli (0.8%) were detected. Eight samples contaminated with bacteria were randomly selected, further analyzed by PCR-DGGE, and compared with the culture-based method. Two cases detected non-pathogenic E. coli by PCR-DGGE only, despite a lack of detection by the culture method. It was supposed there was possibility of sample loss during its 10-fold dilution for appropriate cultivation. In the detection of high-risk food-borne pathogens, it was found that the detection limit was lower in PCR-DGGE than in the culture-based method (10 CFU/g). This suggests that PCR-DGGE can be alternatively used to detect strains. On the other hand, low-risk food-borne pathogens seem to have higher detection limits in PCR-DGGE. Consequentially, this study contributes to the improvement of food-borne pathogen detection and the prevention of its related-diseases in fresh-cut agricultural materials.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.75-81
• /
• 1978

Elder-berries are economical plants and grown commercially in the United States. Most of the crop is sold to processors and made into natural colour, jellies, jam, port wine or elder berry wine, elder berry juice or used to manufacture of pie mixes. Processors are showing increasing interest in cultivation elder berries. In the present study was wish to find the effect of various factors and practical methods on the processing for the true fruit colour made from fresh elder berries juice as the clearing by the treated pectinase, added sugar, vaccum concentration, extraction of anthocyanosid powder and its property with used prospects. In this study obtained results can be summarized as follows. 1. Pectinase is useful and effected to make clear juice from fresh elder berry juice treated on the $34{\sim}45^{\circ}C$. 2. P.V.C. drum is most useful stored without unfading for clearing elderberry juice and its exposed redish dark purple colour. 3. Clearing elderberry juice stored in the stainless steel drum, changed colour from redish dark purple to dark violets during the stored at the room temperature. 4. Added sugar (Brix $48{\sim}53^{\circ}C$) to the fresh elderberry juice is useful and suitable prospects for to make home juice and wine. 5. The elderberry juice of vaccum concentration is change colour from dark purple to black brown colour during the stored at the room temperature. 6. Its possible to make anthocyanosid powder extracted made from fresh elderberry juice 7. Property of anthocyanosid is an follows. 1) The spectrum of elderberries juice is $523{\sim}530m{\mu}$ 2) The colouring stability is less than $pH_4$ 3) The colouring stability by the heating is less than $pH_4$, and then the more than $pH_4$ is changed colour from redish dark purple to dark brown. 4) By the light colouring stability is less than $pH_4$ 5) The colouring most stability in the pH is $pH_3$ 8. In the future, natural colour made from elderberry juice on the useful prospects is suitable used to make natural fruit juice, ice cream, candy, commercial and home wine, gum, and manufacture of jelly jam, pie maxes, ect.